Oven Repair

Replace the Oven Latch Motor and Switch Assembly When Your Whirlpool Oven Door Won’t Lock

Some of your oven’s features will only activate when the door is locked shut. But if the oven latch motor and switch assembly is broken, your oven won’t be able to recognize that the lock is engaged. If you’re encountering this problem, order a replacement latch motor and switch assembly #WPW10107820 for your Whirlpool oven. Then follow these steps to install the new part.

1. Unplug the oven before you get started.

During this repair, you will be disconnecting wires. Unplug the appliance before you start to stay safe from electrical injuries.

2. Remove the old oven latch motor and switch assembly.

Remove the top rear access panel. To do this, remove the screws around the perimeter and the panel and pull it down out of the top groove. Set it aside. Next, locate the assembly at the left side of the oven’s interior. Pull off the wire harnesses for the white and dark brown wires. Also detach the two blue wires from the motor and switch assembly.

The whole assembly is attached to the oven by a bracket. Loosen the two screws holding the bracket in place.

Then pull the assembly down and off the connector rod. This is the part that locks into place when the motor is active and connects to the front door. Set the old assembly aside.

3. Install the new assembly.

Hold the new part in place flush against the back of the oven. First, snap the connector rod into the circular part. Then rethread the two screws through the bracket to hold the new assembly in place.

Once the part is secure, reattach the wires. Attach the white and dark brown wires to the motor and the two blue wires to the switch. You can just push them onto the ports by hand.

4. Reattach the rear access panel.

Slide the top of the panel into the groove at the top of the machine and slightly bend the panel so the bottom also slides behind the bottom rear access panel. Tighten all the screws back into place around the perimeter of the panel.

Now the lock should engage. Go to Appliance Repair Specialists here for more troubleshooting and repair information.

ARS

Leave a Comment
Share
Published by
ARS
Tags: WPW10107820

Recent Posts

Whirlpool Fridge Water Not Working, but Ice Is? Here’s Why

Cold, filtered, fresh-tasting water is one of the best parts about having a high-quality fridge…

4 days ago

How to Clear E24 Error on Bosch Dishwasher

If your Bosch dishwasher is displaying the E24 error code, it usually indicates a drainage…

1 month ago

Samsung Dryer Not Heating Properly? (5 Fixes)

When your dryer isn’t heating properly, it can be very disruptive to your daily routine.…

2 months ago

Why Is Your Mini Fridge Not Cooling? (5 Potential Reasons)

Since the job of a mini fridge is to keep drinks and food items cool…

3 months ago

How to Fix Samsung Washer Error Code 4C

Washing machines are essential appliances in our daily lives. However, no matter how sturdy and…

4 months ago

How to Resolve UE Error Code on your LG Washer

Doing laundry is a chore that we all have to do, but it can be…

5 months ago