Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.


Local Reviews
for Ventura, CA

Rated 5.0 out of 5 stars based on 1 customer reviews

Map of Ventura, CA

Great service





Response from Appliance Repair Specialist:

Hello Caleb, Thank you for the awesome review! We strive for such service and we are more than happy you had a pleasant experience.


Aaron  B.

Aaron B.

DISHWASHER BOSCH SHP865WF5N/11 "* Unit push to stat button was stuck , pull console reset and aligned the push to start button reinstalled the console and retested ops unit started and works as designed now"

Near Dove St, Ventura, CA 93003
Aaron  B.

Aaron B.

REFRIGERATOR FRIGIDAIRE FFTR1814TB0 Customer has a compressor and a Yoder loop bypass

Near Woodland St, Ventura, CA 93003
Aaron  B.

Aaron B.

DISHWASHER BOSCH SHX5AVF5UC/22 "Unit not draining drain motor stalled , cleared water pulled drain pump cleared debris tested unit motor works good, unit drains correct now ops normal"

Near N Brent St, Ventura, CA 93003
Hector Z.

Hector Z.

WASHER MAYTAG MHW5500FW0 "The washer door is locked and the drain pump is constantly running. Set unit in diagnostic and found no error code. Also ran a quick diagnostic test to be able to open the door. Contacted the tech line and she suggested that the drain hose was too far in into the drain, also found the hot and cold water hoses were reverse. Adjusted drain hose and suggested to the customer to replace both faucet because there frozen up. SR 7723605229. Tested ok."

Near Brevard Ave, Ventura, CA 93003
Hector Z.

Hector Z.

DISHWASHER WHIRLPOOL WDT730PAHZ0 Dishwasher not draining. Checked unit and found faulty drain pump connection. Adjusted and tested ok.

Near Borchard Dr, Ventura, CA 93003
Jesus C.

Jesus C.

WASHER WHIRLPOOL WFW95HEDC0 Customer states that the unit is not functioning. Check unit and replaced door lock. Ran diagnostics and passed. Ran ran a normal cycle and unit is working. Unit is now working as designed

Near Quail St, Ventura, CA 93003
Jesus C.

Jesus C.

DRYER MAYTAG MEDX655DW1 Customer states that the start button not working. Checked unit and found the button pressed too hard into the panel. Pulled button out lock it back in place without taking the panel. Tested unit on time dry cycle.Advised customer that it doesn’t need to be pressed hard to turn unit on. Unit is working as designed.

Near James Ave, Ventura, CA 93003
Jesus C.

Jesus C.

DISHWASHER WHIRLPOOL WDT730PAHZ0 Customer stats that unit is not heating. Ran diagnostics and found error code. To the end of diagnostics placed amp meter on heater wire and got 7.0 amps and dropping to 4 amps. No need to replaced parts at this time. Unit is working as design. F7-E1 No Heat

Near Foothill Rd, Ventura, CA 93003
Hector Z.

Hector Z.

WASHER MAYTAG MVWC565FW0 Checked unit and found stuck drain pump and main control board not getting into diagnostic. Ordered both and reschedule.; ordrng 1 W10876600 (drain pump) and 1 W11116594 (cntrl-elec)

Near Inez St, Ventura, CA 93003
Jesus C.

Jesus C.

WASHER MAYTAG MVWX655DW1 Customer states that unit is not working. Checked unit and it’s completely dead. Removed panel and control board. Installed new board and calibrated unit. Ran diagnostics and passed. Unit is now working as design.

Near San Simeon Ct, Ventura, CA 93003
Hector Z.

Hector Z.

DRYER MAYTAG MEDC465HW0 "According to the customer electric dryer is overheating and tripping the breaker. Checked unit and found dryer pulling 22 AMPS, and on high thermostat open at 180 deg., both of this measurements are normal. Checked outlet receptacle very loose not making full contact with the electrical cord proms, also unable to see the value of the breaker (AMPS). Advise the customer to call an electrician."

Near Bucknell Ave, Ventura, CA 93003
Jesus C.

Jesus C.

DRYER MAYTAG MEDX655DW1 Customer states that button is pushed in. Removed back cover and readjusted switch. Advice customer again not to push hard on button. Tested unit on cycle. Unit is working as design.

Near James Ave, Ventura, CA 93003
Hector Z.

Hector Z.

WASHER WHIRLPOOL WTW8500DC3 Replace water valve. Tested ok.

Near Coolidge St, Ventura, CA 93003
Hector Z.

Hector Z.

WASHER WHIRLPOOL WTW8500DC3 Leaking water valve.; ordrng 1 W11165546 (WATER VALVE)

Near Coolidge St, Ventura, CA 93003
Hector Z.

Hector Z.

REFRIGERATOR WHIRLPOOL WRF535SWHZ01 Frost build up on freezer compartment due to gap on upper section of the door gasket. Adjusted door gasket and sealed all gaps in between cabinet and liner on both compartments. Tested ok.; used 1 482338 (ADHESIVE) from stock

Near Tanager St, Ventura, CA 93003
Jesus C.

Jesus C.

WASHER MAYTAG MHW5500FW0 Customer states that unit has an error code. Checked unit and ran diagnostics found several error codes. Removed back panel and checked pump and cleared any debri. Ran diagnostics and found the pressure switch not working. Removed switch and installed new. Reran diagnostics and passed. Unit is now working as design.F9-E1 long drainF8-E3. Overflow conditionF3-E1 water system level error; used 1 W10448876 (

Near Brevard Ave, Ventura, CA 93003
Jesus C.

Jesus C.

WASHER WHIRLPOOL CAE2743BQ0 Customer states that the unit it’s not working properly. Ran diagnostics and did not find any error codes. Ran diagnostics and passed. Unit is working as designed

Near Ralston St, Ventura, CA 93003
Jesus C.

Jesus C.

WASHER WHIRLPOOL WFW95HEDC0 Customer states that the unit is not functioning. Check unit and replaced door lock. Ran diagnostics and passed. Ran ran a normal cycle and unit is working. Unit is now working as designed

Near Quail St, Ventura, CA 93003
Jesus C.

Jesus C.

DRYER MAYTAG MEDX655DW1 Customer states that the start button not working. Checked unit and found the button pressed too hard into the panel. Pulled button out lock it back in place without taking the panel. Tested unit on time dry cycle.Advised customer that it doesn’t need to be pressed hard to turn unit on. Unit is working as designed.

Near James Ave, Ventura, CA 93003
Hector Z.

Hector Z.

WASHER WHIRLPOOL WTW8500BW0 Door latch not working properly due to Lid not closing all the way because excess of rust in the hinge/spring assembly. Customer has to consult with her partner about the repair. Collected for service call.

Near Bobwhite Ct, Ventura, CA 93003
Hector Z.

Hector Z.

whirlpool refrigerator WRT111SFDB03 freezer compartment been frosted up and fresh food compartment not cooling at all. Customer from the beginning demanding from me a report condemning the refrigerator and refusing service, I advised to her that if she doesn’t allow me to work in the unit I was going to report that she doesn’t want the unit to be repaired. When she finally allow me to check the unit I found both supply and return vent iced up due to an over crowded refrigerator were the cold control (Thermostat) and a the vents are blocked. I removed evaporator cover and with the steamer I cleared all the ice and I installed a heat probe on the drain hole (819042) and I sealed all the gaps in between the cabinet and the liner (482338). When I was performing the repair customer contacted Lowe’s or Whirlpool and she was screaming how unprofessional I was and he doesn’t know nothing. When I finish the repair I tried to explain to her the reason why the refrigerator is not cooling but ag

Near N Dunning St, Ventura, CA 93003
Hector Z.

Hector Z.

MAYTAG WASHER MVWB755DW0 Customer States there are noises during the spin cycle. Checked unit and found worn out bearing. ordrng 1 W10752187 (screw), 1 W10811956 (drum assy), 1 W10902814 (washplate), 1 W11032711 (washer) Replaced gear case and wash plate. Recalibrated and ran a automatic/manual diagnostic test. Tested for leaks. Tested ok.

Near Horizon Dr, Ventura, CA 93003
Aaron  B.

Aaron B.

frigidaire refrigerator FGSC2335TF unit Is operating normal with customers hearing is acoustic noise from the compressor which is a ringing noise operating normal temperatures are good unit is working as designed customer instruct that this is a normal sound referred back to the owners manual is well on page 25 which also lists the noise they can hear ; Job Completed.

Near N Ventura Ave, Ventura, CA 93001
Hector Z.

Hector Z.

whirlpool refrigerator WRF535SMBM00 Replaced freezer door, door gasket and switch. Tested ok.; Job Completed.

Near Thrasher Ct, Ventura, CA 93003
Jesus C.

Jesus C.

KITCHENAID REFRIGERATOR KBFN406EPA00 Customer states that unit is not cooling and working intermittently. Checked unit and ran diagnostics. Tested thermistors, compressor and fans. Or ding parts. ; ordrng 1 W10846767 (cntrl-elec) and 1 WPW10739408 (cntrl-elec), Customer states that unit completely stopped working a week ago. Checked unit and found the inverter flashing. Inverter error code is inverter failure. Checked and power of 118 vac to inverter. Also getting 3.1 vdc. Checked power to compressor and not getting none. Orderding part. Removed inverter and installed new. Turn unit on and found the same error code with inverter fault. Removed inverter and tested the compressor. Found the compressor winding not ohming out. Needs seal system, Completed seal system; used 1 CD8404 ([Alt for AF1200])

Near Shamrock Dr, Ventura, CA 93003
Hector Z.

Hector Z.

kitchenaid dishwasher KUDS35FXSS9 Dishwasher leaking on the lower corners, found worn out door gasket. Ordered gasket; ordrng 1 W10300924V (door seal), Replaced door seal. Tested for leaks. Tested ok.

Near La Salle Ave, Ventura, CA 93003
Aaron  B.

Aaron B.

WHIRLPOOL WASHER CHW9060AW0 F28 code Took pictures of the washer than the customer came up to me and said they canceled at the door cancel call

Near Grand Ave, Ventura, CA 93003
Jesus C.

Jesus C.

maytag washer MVWX655DW1 Customer states that unit is not draining. Checked unit and ran diagnostics. Unit was not allowing to run test. Removed the panel and replaced the control board W11116592 (cntrl) . Ran calibration test and diagnostics. Unit is now working as designed.

Near San Simeon Ct, Ventura, CA 93003
Hector Z.

Hector Z.

JENNAIR RANGE JGC7636BP00 Customer states center front burner head take too long to ignite, also LF burner flame higher then the rest of the burners. Checked unit and found center front electrode too low due to loose screws from the holder orifice. Adjusted electrode and tested ok. Contacted tech line, SR#7722992286, and he said that the reason way the LF burner flame is higher is because bigger orifice and higher BTU. See picture.; Job Completed

Near San Roque Ave, Ventura, CA 93003
Jesus C.

Jesus C.

whirlpool refrigerator WRT111SFDM03 Customer states that unit evap cover icing up. Checked unit and removed cover found frost in the return vent also to seal liner. Ordered parts; ordrng 1 8201711 (adhesive) and 1 W10261263 (deflector) and 1 WP2163777 (blade-fan), Removed back cover and installed new fan blade. Assembled unit and seal the liner on both compartments. Unit is now working as designed.

Near Lynn Dr, Ventura, CA 93003
Aaron  B.

Aaron B.

ge washer GTW330ASK2WW Replace the drain pump but upon replacing the drain pump found out this thing was full of some sort of substance that clogged up the drain line and drain tubes including the drain pump replaced the drain pump filled and drained the unit two times advise the customer if your clocks back up we cannot cover under warrantee it will be a call out and diagnosis trip charge labor and parts that would have to be replaced on his own dime customer understood and said that he didn’t know how it happened unit is working as designed as of right now.

Near Copland Cir, Ventura, CA 93003
Hector Z.

Hector Z.

kitchenaid dishwasher KDTE204EBL1 Customer states dishwasher control panel not working. Tested and found Inoperative UI. Ordered new UI by Service Pointer W10821953.; ordrng 1 W10901795 (panel-cntl), Replaced control panel (User Interface). Tested ok.

Near Strathmore Dr, Ventura, CA 93003
Aaron  B.

Aaron B.

frigidaire refrigerator LGHN2844MF0 Replaced the main board evaporator fan motor and fan blade tested operation to start the cool allow 24 hours to cool off way down operating normal at this time; Job Complete

Near Ellington St, Ventura, CA 93003
Aaron  B.

Aaron B.

frigidaire range FFGW2415QSC Check operation of the unit is working as designed customers concern is that the heat that rolls out the top which is by design of this machine heats up the cabinets to about 100° 120°F which can cause damage to the cabinets eventually but the unit is working as designed and there’s nothing wrong with the performance of the mission instruct customer that this is how the unit is working and designed to work; Job Cmpltd,

Near Westmont St, Ventura, CA 93003
Aaron  B.

Aaron B.

whirlpool freezer WRT541SZDW00 What’s your building up inside the refrigerator section found a 4 inch gap on the hinge side of the fresh food door gasket allowing a lot of moisture coming through the pressured section nothing was frozen over just had a lot of water droplets on the top end of the refrigerator heated up door gaskets to reseal the unit unit is sealed up now correctly operating normal; Job Cmpltd,

Near Gonzaga St, Ventura, CA 93003
Hector Z.

Hector Z.

whirlpool refrigerator WRB322DMBM00 Customer states fresh food compartment getting too cold. Ordered damper control and thermistor.; ordrng 1 WPW10422363 (harns-wire) and 1 WPW10594330 (control), Replaced damper control and harness wire. Tested ok.

Near Shakespeare Way, Ventura, CA 93003
Hector Z.

Hector Z.

whirlpool refrigerator WRS588FIHV According to the customer he call on Monday and he cancel this call

Near Frances St, Ventura, CA 93003
Hector Z.

Hector Z.

WHIRLPOOL WASHER MVWB765FW1 Washer displaying an F3E2 code (Inlet water temperature fault) open or shorted thermistor. Ordered water valve. Also customer still complaints of washer going out of balance. Noticed floor is not level, Suggested to the customer to place a plywood to get the right hand side of the washer straight.; ordrng 1 W11165546 (WATER VALVE) Replaced fill valve. Erased F3E2 code and ran an automatic diagnostic test. Tested ok.

Near Raven Ave, Ventura, CA 93003
Aaron  B.

Aaron B.

kitchenaid refrigerator KSSC48QVS10 Unit ice maker overflowed needs new ice maker ordered parts; ordrng 1 W11126009 (icemaker), Unit ice maker over flowed , replaced the ice maker , refrigerator is hooked up to an R O blaster water system , I instructed that water pressure is crucial to the valve to snap shut and reverse osmosis systems can cause the water valve not shut all the way and cause leaks so customer is instructed that this could be a possibility of why the water cascading down the icemaker unit is working as designed as of right now;

Near University Ave, Ventura, CA 93003
Aaron  B.

Aaron B.

GE WASHER WCVH4800K2WW Unit water valve is leaking hot water filling the unit off, replaced the water valve tested ops unit is now working correct after repair ; used 1 WH13X10046 (WATER VALVE ) from stock

Near Poe Ln, Ventura, CA 93003