Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.
for Turlock, CA
Great Service from an experienced professional.
PAULSON - Turlock, CA
The Serviceman knew just what he was doing. He was professional and competent. The price was appealing and he was fast-he knew what he was doing. I would not hesitate to call on him again. Thanks for a job well done.
Response from Appliance Repair Specialist:
Hello, We are so happy that you had a positive experience. Thank you for taking the time to make a positive review. Great job James!
CARRILLO - Turlock, CA
DIAZ - Turlock, CA
Fixed & explained problems with front loading washer in timely manner!!
WASHER MAYTAG MVWB865GW0 Unit has dent in front and also unit has been dropped causing front right foot bracket to be bent causing unit to sit off. The bracket could not be replaced. Reffering back to install company
UPRIGHT / CHEST WHIRLPOOL WZF34X16DW Evap iced up. Cx to defrost for 48hrs
WASHER MAYTAG MVWC565FW1 Checked unit for fault codes and found over suds fault. Cx stated he used one full code and his load were small. Instructed Cx to use just a half cup for his load size. Cleared fault codes and tested unit ok
maytag washer MVWC425BW1 unit is not completing cycles, unit will stop at mid cycle, ck for codes codes found, Installed new parts ( cnrtl elec, valve) into unit. I then calibrated and tested unit in a diagnostic test mode it completed wash drain spin lock and unlocked, ck for codes found none as well no leaks, customer ok repair.
maytag dryer MED6000XW2 Inspected and tested unit. Found unit making a loud rattling sound during any cycle, removed front door and found blower wheel to be broken causing wheel to rattle on housing, unit is OOW cx did want to pay for service call cx states this is a recall and wasn’t told cx had to pay for service cx is going to call wp to complain about is problem.
Found buttons on console to be stuck, customer could not use oven installed new part W11236885 (console) into unit. Test unit in a bake cycle it heated fine, unit is working as designed customer ok's repair ; Job Complete.
whirlpool refrigerator WRT519SZDW02 Unit is not leveled properly causing front refrigerator door not to seal properly, I then adjust front left & right legs, tested refrigerator door and found it to be sealing properly, unit is leveled properly cooling and temps are working fine as well. ; Job Complete.
whirlpool refrigerator M1TXEGMYW01 R efrigerator compartment is not cooling properly, inspected freezer compartment and found motor fan not working, found frozen ice on evap cover as well, removed evap cover and replaced bad motor fan & bad bimetal