"Replaced weak suspension rods and worn belt. Ran calibration. Fills, agitates, drains, rinses, locks/ unlocks, and spins properly at this time. Drainpipe was replaced by plumber. Complete."

"Drum not turning, replaced belt ,roller kit ,pulley, belt pulley tested unit working properly ; used 1 4392067 (Belt) from stock"

"Ran diagnostics. Has f0e2, f0e5, and f9e1 error codes. Found weak suspension rods, worn belt, plugged standpipe ( drain hose was sealed to pipe-removed reducer ). Instructed customer to call plumber. Needs suspension and belt.; ordrng 1 W11130362 (Suspension) and 1 WPW10006384 (Belt)"

RC temp is 38.4f at same test location as before HV control was replaced. Reschedule for data logger results.; O-emld tckt

Put RC thermistor in ice water for 10 minutes-8.67K ohms. Replaced HV control. RC door squeaking. R & R RC door. Lubed bottom hinge and cams with silicone grease. RC door is opening and closing properly at this time. Installed data loggers in RC and FC. Reschedule to pick up data loggers.; schdld next appmnt for 4/13 SAT 8-10