Service History 640

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS588FIHZ04

Near Jurupa Valley, California 92509

Robert U.

Job Details: 10/10/2024

Found the evap cover has a note card sized frost or droplets occurring. I found after removing the cover the heater was not installed properly from the factory and it was pushing up against the evap cover and I believe that is what was causing the ice to form. I took photos of before and after for reference. Also the customer didnt mention it but I noticed a loud noise coming from the unit. I removed the compressor cover and found the condenser tubes rubbing against the bottom panel where the compressor mounts. I used the insulation that was already attached I just moved it to a more suitable location. The noise level is now normal and the evap cover is now sealing well. Please bill out whirlpool for secondary failure. Last time the unit was not defrosting and that was fixed. Temps in the freezer are at 0 and refrigerator at 36. Job completed.

We serviced a

MAYTAG DRYER

Model MGD3500FW0

Near Port Hueneme, California 93041

Ian Y

Job Details: 10/10/2024

Found machine making loud squealing noise. Removed and replaced pulley belt and rollers. Tested unit no longer making unnatural noise.

We serviced a

MAYTAG DRYER

Model MED4500MW0

Near Reedley, California 93654

J.E.

Job Details: 10/10/2024

Cycled unit and found stripped timer. Installed new timer and retested unit now working as designed. Parts and labor covered by whirlpool please use S Code: S15110Effective Dates: 8/17/23 - 12/31/28 Parts and Labor; used 1 W11685947 (Timer) from stock

We serviced a

FRIGIDAIRE REFRIGERATOR

Model GRSC2352AF1

Near Hesperia, California 92345

Cesar

Job Details: 10/10/2024

Failed valve decline at this time collected $145 IWallet ID #1625827

We serviced a

WHIRLPOOL WASHER

Model WTW5000DW3

Near Oxnard, California 93033

Kenneth

Job Details: 10/10/2024

Installed suspension. Washplate had to be broken off to replace hub. Installed Washplate and hub. Tested unit. Unit is working properly.

We serviced a

JENN-AIR REFRIGERATOR

Model JS48PPDUDE00

Near Los Angeles, California 91311

Sean W

Job Details: 10/10/2024

Replaced control boards.fridge now working properly.

We serviced a

WHIRLPOOL DRYER

Model WGD7300DW0

Near San Miguel, California 93451

Leo

Job Details: 10/10/2024

"Unit found making noise from idler wheel or rollers, disassembled it and replaced whole dryer repair kit, put unit back together, tested it and it is not noisy and heating properly,Job complete."

We serviced a

JENN-AIR REFRIGERATOR

Model JFC2290VEM8

Near Nipomo, California 93444

George

Job Details: 10/10/2024

Found ice maker not releasing ice replaced ice maker again retested filling ok complete

We serviced a

MAYTAG WASHER

Model MVWB865GW0

Near Taft, California 93268

Raymond

Job Details: 10/10/2024

"On arrival unit has F0 E3, tested found worn slider replaced worn slider and tested unit functions as design; used 1 W10734521 (Slider) from stock"

We serviced a

WHIRLPOOL WASHER

Model WTW4955HW1

Near Simi Valley, California 93063

Paul

Job Details: 10/10/2024

"F2E1 stuck keyF7E1 basket speed sensor faultUnit was not spinning, when trying to agitate or spin unit would stall. Replaced cam, capacitor and actuator. Calibrated unit and ran diagnostics, unit is now working properly. Job complete; used 1 W10721967 (CAM) from stock"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRX735SDHZ07

Near Moreno Valley, California 92557

Kevin

Job Details: 10/10/2024

Removed and replaced compressor. Charged with r600. Tested unit. All tests good.

We serviced a

KITCHENAID REFRIGERATOR

Model KRFC704FPS03

Near Arcadia, California 91006

Andy

Job Details: 10/10/2024

"Door gaskets coming apart, replaced door, gaskets, and tested unit working property"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT318FMDW09

Near Ceres, California 95307

Cruz

Job Details: 10/10/2024

"Found ff temperature to be at 32.8°- thermistor is reading out of range- will need to replace UI, thermistor to fix issue- unit is set at low setting too- cx will call back if they want to continue with repair"

We serviced a

GENERAL ELECTRIC REFRIGERATOR/TOP

Model PVD28BYNHFS

Near Patterson, California 95363

Andrew

Job Details: 10/10/2024

Cx complaint. Freezer not cooling properly. Refrigerator area warm. Upon arrival. Found freezer door open. Ran diagnostics. Found door open. On freezer side. Reset door seal. Reset control panel. Checked out components okay. Operating as designed in the garage.

We serviced a

MAYTAG WASHER

Model MHW5630HW3

Near Bakersfield, California 93306

Raymond

Job Details: 10/10/2024

Hoses were installed incorrectly hoses were reversed on hot and cold. Also hoses are leaking and valves. Do not shut off properly. Customer signed waiver of liability for their supply hoses and water for billing replaced valve and tested unit functioning as designed.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF555SDFZ12

Near Bakersfield, California 93313

Jim

Job Details: 10/10/2024

Replaced ice container. Reduced the air flow to deli drawer. Unit tested ok

We serviced a

FRIGIDAIRE REFRIGERATOR

Model GRSS2652AF9

Near Bakersfield, California 93305

Brandon

Job Details: 10/10/2024

Installed new compressor and pressurized system with nitrogen. Found leak on evaporator. Replaced it as well and charged with 65g r600a. Replaced broken UI as well.

We serviced a

WHIRLPOOL WASHER

Model WTW4816FW3

Near Arroyo Grande, California 93420

Jack

Job Details: 10/10/2024

Replacing parts needed for repair. Replaced control board. Ran calibration first and running diagnostic test cycle. Unit is now functioning as designed. Pressure sensor is now functioning correctly. Both tests passed and running a cycle. Passed. Job completed

We serviced a

GENERAL ELECTRIC DRYER - ELECTRIC

Model GTD38GASWWS

Near Wasco, California 93280

Esteban

Job Details: 10/10/2024

Burner was removed and replaced. Unit passed all test. Unit is working as intended.

We serviced a

GENERAL ELECTRIC WASHER

Model GTW465ASN3WW

Near San Bernardino, California 92410

Francisco

Job Details: 10/10/2024

"Removed and replaced drain pump, tested ops unit working properly."

We serviced a

MAYAG WASHER

Model MHW8200FC0

Near Wofford Heights, California 93285

Brandon

Job Details: 10/10/2024

Installed new Ui which correct the issue. I adjusted total to include the senior discount. That brought the total from 802.02 to 721.98

We serviced a

WHIRLPOOL WASHER

Model WFW8620HW4

Near Monterey Park, California 91754

Stephen

Job Details: 10/10/2024

"Checked pumps and stator- ohmed out to specs. Replaced ACU. Ran diagnostics. Had f3e1 error code. Cleared error code. Ran diagnostics cycle. Locks/ unlocks, fills, washes, drains, rinses, dispenses, and spins properly at this time. Advised customer not to use single use dispenser when using load n go. Complete."

We serviced a

GENERAL ELECTRIC RANGE - GAS

Model JGBS66REK6SS

Near Oxnard, California 93033

Isidro

Job Details: 10/10/2024

"Installed new parts listed, unit is now operating as designed at this time of service,cx approved repair"

We serviced a

KITCHEN AID REFRIGERATOR

Model KRFF507HPS01

Near Bakersfield, California 93306

Brandon

Job Details: 10/10/2024

Installed all new parts to correct ice production issue. New ice maker is working as designed.

We serviced a

WHIRLPOOL WASHER

Model WTW8040DW4

Near Maricopa, California 93252

Raymond

Job Details: 10/10/2024

"Installed washplate, nut Gearcase, rotor stator clutch slider and screws, calibrated and tested, unit functions as designed"

We serviced a

GENERAL ELECTRIC REFRIGERATOR

Model ZISS480DNFSS

Near Los Angeles, California 91344

ERICK H

Job Details: 10/10/2024

Replaced drain pan. Unit operating as designed. Job complete.

We serviced a

WHIRLPOOL RANGE

Model WW30430P

Near Redlands, California 92373

Rod

Job Details: 10/10/2024

Charge out per LS: CONCESSIONS - J1CEEV0WL1Breaker trips when oven offBreakers appear weak and will need examined by licensed electrician.. display dead though oven will heat when ui interfaced by consumer. Safety issue..electronics are no longer manufactured.

We serviced a

WHIRLPOOL WASHER

Model MVW4505MW1

Near Porterville, California 93257

J.E.

Job Details: 10/10/2024

Cycled unit and found bad latch installed new latch and retested unit now working as designed job completed

We serviced a

MAYTAG DRYER

Model MEDX655DW1

Near Fresno, California 93706

Timothy

Job Details: 10/10/2024

Found the element open. Replaced and tested. Informed customer that there vent is restricted . The unit can not perform as designed until this is taken care of. Customer said they would get that taken care of.

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FFTR2021TW2

Near Santa Clarita, California 91387

Felipe S

Job Details: 10/10/2024

"Remove old compressor, evaporator and drier. Replace this components. Pressurize the system and no leaks found at this time. Vacuum the unit and unit holds the vacuum. Recharge the unit with 4.75 oz of refrigerant R134a. Reboot the unit and unit starts to cooling down, inform the customer they need wait at least 24 hours for proper temperatures. Job complete"

We serviced a

WHIRLPOOL WASHER

Model WTW4816FW3

Near Modesto, California 95351

Timothy G

Job Details: 10/10/2024

Inspected unit for no spin. Found actuator was out of the cam assembly reinserted and unit is now spinning per design.

We serviced a

MAYTAG DISHWASHER

Model MDB8959SKZ0

Near Glendale, California 91214

Samson

Job Details: 10/10/2024

"Called tech support to document hard water that cx confirmed they are having, replaced all parts per tech support. SR # 7739941052. Unit test ok. Complete . If problem reoccurs after this cx will have to call cx service. Cx hard water is a serious contributing factor. Complete"

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FFTR1835VWB

Near San Luis Obispo, California 93401

Jack

Job Details: 10/10/2024

Replacing parts listed. Replaced what was needed. Checked out and unit is now working. Compressor turned on and timer is now working as designed. Job completed

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FFTR1835VWB

Near Bakersfield, California 93306

Brandon

Job Details: 10/10/2024

"Unit was cooling normally when I arrived. Cx states that the ref section got up to 80° last week. Freezer remained at 0. The next day things returned to normal and have stayed normal since. The only thing I found was the evap fan motor loose in its housing and rubbing the fan board on plastic. I corrected this and verified fan is still operating normally. If called back, send with control and fan motor."

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FRSS2623ASF

Near Barstow, California 92311

Jonathan B.

Job Details: 10/10/2024

"JB out 10/10/24.Customer states refrigerator was making a very loud grinding noise.Customer states high temp alarm was for one night only and corrected itself. Upon arrival found unit running normally. Fresh ice in the ice storage bin, indicating icemakers producing ice cubes correctly. Both refrigerator and freezer are cooling properly. And unable to verify any loud or unusual noises at this time. found refrigerator door not aligned properly. Adjusted bottom refrigerator door so that both doors are level, close easily and seal properly. No charge to customer. Job complete."

We serviced a

WHIRLPOOL RANGE

Model WFES3530RS0

Near Bakersfield, California 93314

Chase

Job Details: 10/10/2024

"Found door out of alignment. Corrected left hand side hinge. Door now closing and opening without any issues, all ops checking good."

We serviced a

GENERAL ELECTRIC WASHER

Model GFW850SSN1WW

Near Caruthers, California 93609

Enrique

Job Details: 10/10/2024

Washer not completing cycles (no drain). Installed new drain pump and hose. Washer operating as designed. No leak. Sr#14484008.

We serviced a

MAYTAG WASHER

Model MVWX655DW1

Near Simi Valley, California 93065

Richard

Job Details: 10/10/2024

Upon arrival replaced wash plate gear case drive motor basket hub actuator belt cam tested u it unit passed all tests and is working as Intended ran a calibration on the unit as well job completed please charge double labor gear case drive motor and basket hub replacement

We serviced a

MAYTAG DRYER

Model MGD7230HW3

Near Bakersfield, California 93312

Brandon

Job Details: 10/10/2024

Installed new facia and tested unit. Everything is now working as designed.

We serviced a

WHIRLPOOL DRYER

Model IEX3000RQ1

Near Coalinga, California 93210

Esteban

Job Details: 10/10/2024

"Rollover ,belt and pulley worn out. Belt,pulley and rollers were removed and replaced. Unit passed all test. Unit is working as intended. Recommended customer to reoplave exhaust hose due to hose is leaking air into the house."

We serviced a

WHIRLPOOL DRYER

Model WGD5605MC1

Near Los Angeles, California 91406

Leon

Job Details: 10/10/2024

Cx states that unit is not heating up Replaced all selected parts Unit working properly as needed

We serviced a

WHIRLPOOL WASHER

Model WFW5605MC1

Near Los Angeles, California 91406

Leon

Job Details: 10/10/2024

Cx states that unit is not getting cold water After running diagnostic test find that water line hoses was reversed Remove and reinstall water line properly Tested unit working properly as required

We serviced a

MAYTAG DRYER

Model MED4500MW0

Near Salida, California 95368

Martin

Job Details: 10/10/2024

Found broken knob replaced knob dryer is working per design job complete ; used 1 W11675852 (Knob) from stock

We serviced a

WHIRLPOOL WASHER

Model WTW5100HC3

Near Patterson, California 95363

Andrew

Job Details: 10/10/2024

Cx complaint is not spinning. No Agitation Upon arrival. Ran diagnostics Found capacitor failed. Replaced capacitor with new capacitor. Checked out components okay. Tested parts out okay. Capacitor W11395618; used 1 W11395618 (Capacitor) from stock

We serviced a

KITCHENAID MICROWAVE

Model KMHS120ESS11

Near Agoura Hills, California 91301

Richard

Job Details: 10/10/2024

"Upon arrival, inspected unit customer stated, found, making loud, buzzing noise. I turned on the fan the fan would make a very loud, buzzing noise. I inspected the air flap on top of the microwave, found that it was stuck possibly got stuck during installation, was able to adjust it and fix venting unit is no longer making loud buzzing noise tested microwave. Microwave is heating as intended. Fan is now working as intended. Pan was also not completely screwed into cabinet of actual microwave for missing one screw added a screw"

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FRSS2623AS5

Near Santa Clarita, California 91321

Felipe S

Job Details: 10/10/2024

"Install the new icemaker on the unit. Retest the unit and now is not making the noise anymore. Additional adjust the paddles for ice and water dispensing, customer says are loose. Job complete."

We serviced a

KITCHEN AID ICE MACHINE

Model KUIX535HPS00

Near Bakersfield, California 93314

Chase

Job Details: 10/10/2024

"Installed new compressor, evaporator, drier, charged with 134a. All ops now checking good."

We serviced a

WHIRLPOOL WASHER

Model WTW8127LW

Near Santa Maria, California 93455

George

Job Details: 10/10/2024

Installed board tested on a fill drain and spin tested ok complete

We serviced a

FRIGIDAIRE RANGE - GAS

Model FGGH3047VFB

Near Oxnard, California 93036

Ian Y

Job Details: 10/10/2024

Found unit had roaches in panel like I thought and like previous tech told me. Changed customer for service call. Advised customer to have pest control out and her oven will work fine. They are walking on the UI panel pressing buttons.

We serviced a

MAYTAG WASHER

Model MVW7230HW1

Near Camarillo, California 93012

Ian Y

Job Details: 10/10/2024

"Removed and replaced units control board. Tested, unit no longer throwing code."

We serviced a

WHIRLPOOL WASHER

Model WFW5605MC0

Near Bakersfield, California 93311

Chase

Job Details: 10/10/2024

"Installed new ui and control. Programmed and tested, all ops now working as designed."

We serviced a

SPEED QUEEN WASHER

Model AFNE9BSP117TW13

Near Ventura, California 93003

Kenneth

Job Details: 10/10/2024

Installed all 4 shocks and tested. Unit is working properly. Customer approves function at this time.

We serviced a

MAYTAG WASHER

Model MVWC565FW2

Near Moreno Valley, California 92551

Kevin

Job Details: 10/10/2024

Removed and replaced suspension and tub ring. Tested unit. All tests good.

We serviced a

KITCHENAID REFRIGERATOR

Model KRFC704FPS05

Near Pasadena, California 91107

Andy

Job Details: 10/10/2024

"Unit makes noise, found thermistor bad frost in fresh food evaporator coil causing noise, replaced evaporator cover kit tested unit working properly"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF535SMBM00

Near Westlake Village, California 91362

Richard

Job Details: 10/10/2024

"Upon arrival inspected unit. Customer stated. Icemaker was making ice, but the icemaker mold had fallen off of the side of the freezer compartment. During my inspection I found that the icemaker mold was just hanging there mustve fallen off the screws was able to rehang the icemaker and tightened all screws that hold it in unit is working as intended now. Job complete."

We serviced a

MAYTAG WASHER

Model MVW7230HW1

Near Los Angeles, California 91343

Sean W

Job Details: 10/10/2024

"Slider is damaged.replaced slider,washer now working properly.; used 1 W10734521 (Slider) from stock"

We serviced a

GENERAL ELECTRIC WASHER

Model PTW600BSR1WS

Near Dinuba, California 93618

J.E.

Job Details: 10/10/2024

Cycled unit and found broken pump. Installed new pump and hose retested unit now working as designed job completed

We serviced a

MAYTAG WASHER

Model MVW5430MW1

Near Yokuts Valley, California 93675

Timothy

Job Details: 10/10/2024

"Checked for faults and found a 7-1(target RPM 0-9(no drain)0-5(unbalanced load). Cleared faults, ran a drain spin cycle and the unit showed a7-1 an 7-9 error code when I checked for faults air found a 0-9 after that the unit would not enter service mode. Unit was having difficulty latching. Replaced latch and tested."

We serviced a

KITCHEN AID REFRGERATOR

Model KRFC704FPS06

Near Riverside, California 92504

Robert U.

Job Details: 10/10/2024

I replaced the panel and verified the operation of the new panel. It will take 24-48 hours till the temps are restored. Job completed and collected the full amount on first visit. Job completed.

We serviced a

MAYTAG WASHER

Model MVWC565FW1

Near San Bernardino, California 92410

Francisco

Job Details: 10/10/2024

"Cx stated unit does not start and it makes slight clicking noise. Found code f7 e5, shifter not moving unit position. Removed and replaced shifter unit now working properly."

We serviced a

WHIRLPOOL DISHWASHER

Model WDF330PAHS3

Near Camarillo, California 93010

Isidro

Job Details: 10/10/2024

"Installed and secured new springs and adjusted to customers liking, unit is now operating as designed, cx approved repair and service"

We serviced a

KITCHENAID REFRGERATOR

Model KRFC704FPS04

Near Los Angeles, California 91307

Alejandro

Job Details: 10/10/2024

"Found the unit, not cooling, unit not have refrigerant, charge nitrogen, verify the leak in condenser, repair the leak in condenser, replace drier, compressor, service valve and inverter, charge nitrogen not verify leaks, make a vacuum, charge refrigerant 4.50 R134a check compressor condenser and evaporator fan motors unit start work properly"

We serviced a

WHIRLPOOL DRYER

Model WED8127LW1

Near San Luis Obispo, California 93405

Jack

Job Details: 10/10/2024

Checked out unit and had low heat in unit. Checked for codes. F2 e1 popped up. Ran cycle again and checked vent out side and felt cool. Pulled unit away from wall. Vent had a restriction dent kink in vent tube. Had to reroute vent so when dryer goes back in it doesnt kink. Tested vent off and tested back on after fix. How its getting hotter in unit so now its working as designed. Job completed

We serviced a

MAYTAG WASHER

Model MHW5630HC0

Near Templeton, California 93465

Jack

Job Details: 10/10/2024

F0e5 running Diagnostic test. George with tech line. Ran test 12 and unit is just sensing. Water is not draining completely. W11319789 pump assembly. Sr number for call 7740088578. Replacement of pump. Running test again. See if any issues appear. Checked out and is now working. Functions are working. Job completed

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT311FZDW02

Near Modesto, California 95351

Timothy G

Job Details: 10/10/2024

Inspected unit and while removing the gas to check my pressures. Cx noticed the back of unit panel was caving in. When I charged the unit with 180psi of nitrogen the back panel expanded. When relieving the pressure panel then caved in again. Calling techline to document sr#7740089389 up for review. Job complete

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF767SDHZ04

Near Mentone, California 92359

Rod

Job Details: 10/10/2024

Seal void at freezer drawer Reset seal.designed operation was restored

We serviced a

MAYTAG WASHER

Model MVW6230HW0

Near Santa Clarita, California 91351

Felipe S

Job Details: 10/10/2024

Install the new water valve assembly on the unit. Retest the unit and now is working properly. Job complete.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS321SDHZ08

Near Ventura, California 93003

Kenneth

Job Details: 10/10/2024

Installed valve and chute. Tested unit. Unit is working properly. Customer approves function at this time.

We serviced a

JENN-AIR REFRIGERATOR

Model JF36NXFXDE01

Near Los Angeles, California 91367

Giovanni M

Job Details: 10/10/2024

I unclogged the drain line using a hot steamer. Then poured some water down the line to make sure it wasnt still clogged. Then I replaced the ice maker extensions. Unit is working as designed at this time.

We serviced a

MAYTAG DRYER

Model MGDC465HW0

Near Riverside, California 92504

Robert U.

Job Details: 10/10/2024

Found the unit was just repaired on Monday. The insurance company doubled booked the appointment. Please bill insurance company for double booking. I took a photo of the model and serial number and verified the unit now sounds normal. All functions working. Job completed.

We serviced a

WHIRLPOOL MICROWAVE

Model WMH76719CZ2

Near Burbank, California 91505

Tim B

Job Details: 10/10/2024

Replaced control board and tested through diagnostics and u it functions as normal.

We serviced a

WHIRLPOOL WASHER

Model WFW560CHW4

Near Moreno Valley, California 92555

Kevin

Job Details: 10/10/2024

Removed and replaced main control. Tested unit. All tests good.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT311FZDW02

Near Walnut, California 91789

Andy

Job Details: 10/10/2024

"Leaks in fresh food compartment, repaired evaporator cover and called tech line tested unit working as designed sr#7740089168"

We serviced a

FRIGIDAIRE FREEZER

Model FFUE2024AW

Near Yucaipa, California 92399

Francisco

Job Details: 10/10/2024

"Checked unit found an evap leak, removed and replaced evap and compressor, re tested for leaks did not find any, vacuumed and recharged up to 46 g of r600. Asked Cx to allow 24 hrs for normal ops."

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Camarillo, California 93010

Ian Y

Job Details: 10/10/2024

Removed and replaced tub to pump because it was slightly ripped. Tested unit again and noticed it was leaking out of hole in wall connected to standpipe. Advised customer to have plumber out. Job complete.

We serviced a

WHIRLPOOL WASHER

Model WFW560CHW4

Near Redlands, California 92374

Francisco

Job Details: 10/10/2024

"Checked unit found power at outlet, filter and acu, no led diagnostics light at all, opened fuse at control. Cx signed waiver and acknowledged risk of damage because unit is in drain pan. Removed unit from pan, removed and replaced acu, tested ops and re installed unit working ok, no damage by tech."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF555SDFZ16

Near Arroyo Grande, California 93420

George

Job Details: 10/10/2024

Found refrigerator not dispensing ice found auger propeller loose rethighten retest unit functioning as design complete.

We serviced a

MAYTAG DISHWASHER

Model MDB8959SKZ2

Near Los Angeles, California 91307

Sean W

Job Details: 10/10/2024

"Replaced motor-sump assembly,optics and control board.successfully ran diagnostic cycle without error codes displayed or interruption.dishwasher now working properly."

We serviced a

WHIRLPOOL DISHWASHER

Model WDT730HAMZ1

Near Palmdale, California 93591

Jonathan

Job Details: 10/10/2024

"Replaced defective drain pump. Tested unit and is working properly, no leaks at this time."

We serviced a

MAYTAG WASHER

Model MVW7232HW1

Near Hughson, California 95326

Timothy G

Job Details: 10/10/2024

F0e3. Over loaded. Cx was using delicate while washing towels. Ran diagnostic tests and found that the water valves are slow causing long fill times. Replaced valve and retested. Unit is now filling per design. Job completed

We serviced a

JENN-AIR VENT HOOD

Model JXW9036WP2

Near Cayucos, California 93430

Leo

Job Details: 10/10/2024

"Replaced damaged switch, tested fan , all 4 speeds work as designed,Job complete."

We serviced a

GENERAL ELECTRIC WASHER

Model PTW900BPT0RS

Near Merced, California 95341

Manuel B

Job Details: 10/10/2024

"Washer not working install new lid lock and stiker. no spin,no draining not responding call tech support test 14 and 13 on manual test.tech support instruct to replace ACU.file14485493"

We serviced a

GENERAL ELECTRIC DRYER

Model GTD33GASKWW

Near Grover Beach, California 93433

George

Job Details: 10/10/2024

Installed parts tested check out ok complete.

We serviced a

MAYTAG WASHER

Model MVW6230HW2

Near Glendale, California 91202

Oscar

Job Details: 10/10/2024

"After completing a full rebuild, the factory calibration cycle was successfully achieved."

We serviced a

WHIRLPOOL DRYER

Model MGD5500FC0

Near Barstow, California 92311

Jonathan B.

Job Details: 10/10/2024

"JB OUT 10/10/24.Customer states the dryer runs but no heat.Upon arrival tested dryer in Timed Dry and verified no heat. Also verified thumping noise indicating worn Roller Supports, Drive Belt and Idler pulley.Estimate to replace drive belt, idler pulley with bracket assembly and five support roller bearings has been declined. Estimate to replace the thermal fuse has been approved.Remove the top and front cover. Install replacement thermal fuse.Reassemble didnt tested operation. Recommend customer customer replace existing exhaust vent hood with louvered style to prevent restriction. Collected to repair $443.69 paid by. Authorization code A43LY9, transaction ID 1627821. One year warranty on replacement part against actual defect. Warranty does not have replacement exhaust ducting vent hood has not been replaced with louver style and ducting in wall restriction exist, causing the thermal fuse to open. Paid in full complete"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS588FIHZ00

Near Turlock, California 95382

Cruz

Job Details: 10/10/2024

Fixed- installed new (door ss) no scratches- no dents- ice maker test pass- cooling & temperature are working fine- cx ok repair

We serviced a

WHIRLPOOL WASHER

Model WTW5105HW3

Near Lancaster, California 93535

Jonathan

Job Details: 10/10/2024

"Replaced defective cam, belt, and actuator, tested unit and is working properly"

We serviced a

KITCHENAID DISHWASHER

Model KDTM604KPS1

Near Santa Clarita, California 91355

Felipe S

Job Details: 10/10/2024

Install the new pump and duct on the unit. Retest the unit and now unit is working properly. Job complete

We serviced a

FRIGIDAIRE REFRIGERATOR

Model PFD28KBLHTS

Near Bakersfield, California 93306

James

Job Details: 10/10/2024

"Previous filter purchased from Lowes . Found filter installed backwards. Removed, rotated, and Reset filter and unit is now working as intended."

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Los Angeles, California 91311

Paul

Job Details: 10/10/2024

"Unit was not spinning properly, loud grinding noise. Replaced cam and actuator, cam was broken. After repair unit is working properly."

We serviced a

MAYTAG WASHER

Model MVW7232HW0

Near Victorville, California 92394

Cesar

Job Details: 10/09/2024

"Found multiple failures. Suspension is worn causing off balance loads, main tub seal is leaking, water had damaged gear case bearings, metal ring on slider has separated from plastic slider. And wash plate is stuck will have to break it off to replace gear case ; ordrng 1 W11449841 (Gear case) and 1 W10734521 (Slider) and 1 W11400156 (Suspension) and 1 W10902814 (Wash plate)"

We serviced a

GENERAL ELECTRIC TRASH COMPACTOR

Model UCG1520NSS

Near Tehachapi, California 93561

Randy

Job Details: 10/09/2024

Removed and replaced switches. Tested would not work. Called techline Check for the voltage on yellow. Yellow to ground. 120. Voltage per techline. Bad motor. Case# 14472892. ; rqstng P&A on 1 WC19X20242 (Motor)

We serviced a

WHIRLPOOL DISHWASHER

Model WDT730HAMZ1

Near Palmdale, California 93591

Jonathan

Job Details: 10/09/2024

Tested unit found defective drain pump; ordrng 1 W10876537 (Drain pump)

We serviced a

GENERAL ELECTRIC DRYER

Model GFD85GSPN1RS

Near Palmdale, California 93551

Jonathan B.

Job Details: 10/09/2024

"JBout 10/9/24.Customer states use unit makes a loud grinding sound when in use. Upon arrival tested unit verified customer complaint. Turn drum by hand. Unit did not duplicate sound. Unit only makes loud grinding sound when motor is running drum. Visually inspected blower wheel. Found no objects in blower wheel. Ordering replacement motor, blower wheel, belt, and idler arm. Repairs to be made under the manufacture warranty at no charge. Order parts . ; ordrng 1 WH03X32157 (MOTOR) and 1 WH16X33977 (BLOWER WHEEL) and 1 WE03X29704 (DRIVE BELT) and 1 WE03X30657 (IDLER ARM)"

We serviced a

MAYTAG WASHER

Model MVW5430MW1

Near Lancaster, California 93536

Jonathan B.

Job Details: 10/09/2024

"JB OUT 10/9/24.Customer states unit is unable to be powered up. Additionally, when unit did run, it was making a grinding noise in the spin cycle. Unable to power up unit. Upon pressing power button LED indicators flash once and nothing more. Unable to power up unit. Able to test the spin cycle. Ordering replacement. ACU, ENCODER, USER INTERFACE SHIFT ACTUATOR AND CAM ASSEMBLY ; ordrng 1 W11627413 (ACU) and 1 W11675700 (ENCODER) and 1 W11675701 (USER INTERFACE) and 1 W11481722 (SHIFT ACTUATOR) and 1 W10721967 (CAM ASSEMBLY)"

We serviced a

GENERAL ELECTRIC MICROWAVE OVEN

Model PEB9159SJ3SS

Near Santa Maria, California 93455

George

Job Details: 10/09/2024

Open unit up found bad thermestat to magnetron need this part.; ordrng 1 WB24X27107 (Thermestat)

We serviced a

WHIRLPOOL WASHER

Model WTW4816FW2

Near Santa Maria, California 93455

George

Job Details: 10/09/2024

Found washer Gearcase with a squeal need this part .; ordrng 1 W11454741 (Gearcase) and 1 WP3951744 (Agitator)

We serviced a

GENERAL ELECTRIC WASHER

Model PFQ97HSPV0DS

Near San Luis Obispo, California 93401

Jack

Job Details: 10/09/2024

Running diagnostic test to see why no water flow. 9 error codes. F26 oob inactive. F18 drain pump clearing. F35 accelerometer fault. F63 active accelerometer fault. F353 active critical compressor discharge over temp. F352 inactive compressor discharge over temp. F360 humidity sensor (rh) fault inactive. F24 door logic failure inactive. F31 out of balance fallback final spin active. Scott with tech line. Ntc 4 79. Ntc 5 84. Filter out of the unit. Case number for this call. Ntc4 and main board. Cant even change pet settings. 14474368. WH22X35701 main board. ; ordrng 1 WH22X35701 (Main board) and 1 WE04X35682 (Ntc4)

We serviced a

MAYTAG WASHER

Model MVWB865GW0

Near Los Angeles, California 91601

Oscar

Job Details: 10/09/2024

"Upon arriving and before replacing the new lid latch, I have accessed diagnostics saw the errors F5 E2, and F5 E1, so I have proceeded to erase the codes and proceeded to replace the lid lock . machine is doing the same thing, trying to latch but couldnt. The error codes are back. So I have contacted whirlpool support and spoke with Edwin, he heard my explanation and after, he asked me to access diagnostics and erase the codes one more time, so I did and then we tried functional testing and achieved the same results. Edwin then recommended replacing the controller and lid latch one more time. 7740080384; ordrng 1 W11401710 (Controller) and 1 W10810403 (Lid lock)"

We serviced a

ZLINE RANGE

Model RA36

Near Bakersfield, California 93306

Raymond

Job Details: 10/09/2024

"0096404 account. On arrival customer met tech at door slightly frustrated wondering what tech was therefore to fix as she has multiple appliances advised customer in there to fix an oven. Customer asked if tech had all the parts needed. Advised tech is simply there to diagnose, and if parts are needed, tech would contact tech line as provided per the notes customer said there was no point for me to be there if I dont have any parts however show tech to the unit. Customer states states broil element not working not heating up confirmed failure advised customer we will need to uninstall unit. Customer declined to sign waivers and advised she wants to wait for contractors to show up that they were supposed to be there, tech advised customer if she does not want to sign waivers tech has to stop all work and customer will need to make unit accessible for service. Informed and was told to submit notes and EW would follow up. ; O-emld tckt"