We serviced a
FRIGIDAIRE REFRIGERATOR
Model GRSS2652AFA
Near Paso Robles, CA 93446
Jack
Job Details:
04/28/2025
Checking the unit to see why unit is not making ice. Testing unit to see why its not harvesting. Test 87 temp. Temp is 1. Robert with tech line. Replaced valve still nothing. Ran test 94 82 87 86 88. File 88122061. Heater replacement 5304504455 heater cap. Main board 5304533225. ; ordrng 1 5304504455 (Heater replacement) and 1 5304533225 (Main board)
We serviced a
WHIRLPOOL WASH DRYER COMBO
Model WET4027HW2
Near Fresno, CA 93727
Timothy
Job Details:
04/28/2025
The unit is not connected to power or water and the drain hose is missing. The customer states that when it is plugged in the control has no lights but clicking can be heard. I asked if the drain pump came on and they said they believed that was the sound they were also hearing. The unit will need to be connected to a 220vac outlet and water to be able to fully test it. I will order the drain line and try and pre ID a few parts that are suspect. ; ordrng 1 W11629601 (CNTRL-ELEC) and 1 W11481722 (ACTUATOR) and 1 W11614512 (CAPACITOR) and 1 W11281268 (Outer hose assembly)
We serviced a
GENERAL ELECTRIC WASHER
Model GTW720BSN1WS
Near Fresno, CA 93727
Timothy
Job Details:
04/28/2025
I could not duplicate a leak but found there were 2 recent errors for unbalanced loads. Tested suspension and found it is easily bottomed out which downward pressure. This could cause a leak when the unit is rinsing and spinning at the same time. Unit needs a suspension.; ordrng 1 WH03X35580 (Suspension kit)
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FRSS2623AW8
Near Patterson, CA 95363
Nick D
Job Details:
04/28/2025
"Noise complaint and Ice build up still around evaporator fan blade and top part of evaporator coils, tech defrosted ice, advised cx to keep ice maker off until we return with parts.; ordrng 1 241850624 (Fill tube updated gasket water supply tube) and 1 5303918893 (Ice maker fill jacket) and 1 5304532554 (Ice maker)"
We serviced a
WHIRLPOOL WASHERHER
Model WTW5010LW0
Near Newman, CA 95360
Nick D
Job Details:
04/28/2025
"F3E2 pressure switch on ACU board fault code, I got the wrong control board shipped, reordering control board, lid lock and drain pump now working no fault codes for those two parts.; ordrng 1 W11513246 (Control board)"
We serviced a
MAYTAG WASHER
Model MFW7020RF0
Near Bakersfield, CA 93312
Jim
Job Details:
04/28/2025
The door switch is not closing. I do have power. Need new door latch.; O-emld tckt
We serviced a
WHIRLPOOL DISHWASHER
Model WDPA70SAMZ3B
Near Bakersfield, CA 93314
Jim
Job Details:
04/28/2025
"The dishwasher is leaking water. I found it leaking on the right hand side right behind the hinge. I pulled out the dishwasher slightly and remove the front panel. There were no leaks inside. The front panel and the overflow was completely dry, but yet water is leaking from behind the hinge. The only source of leak would be the tub seam. ; ordrng 1 W11409866 (Tub)"
We serviced a
GENERAL ELECTRIC ICE MACHINE
Model UNC15NPWBII
Near Ojai, CA 93023
Rich
Job Details:
04/28/2025
WR55X38595 WR09X38943 thermistorWrong control. Reroute for part.SEND RSGE Case#; ordrng 1 WR55X38595 (Main Control) and 1 WR01X46445 (Pressure Sensor) and 1 WR09X38943 (Thermistor)
We serviced a
WHIRLPOOL WASHER
Model WTW4955HW3
Near Delhi, CA 95315
Nick D
Job Details:
04/28/2025
"Fault codes F3E1 main control & pressure sensor issue, checked all connection to ACU were good, washer sensor issue causing drain motor to start off and on,tech witnessed it, parts ordered and rescheduled.; ordrng 1 W11608056 (Main control) and 1 W11038689 (Inlet valve) and 1 WP353244 (Hose to preassure switch)"
We serviced a
KITCHEN AID OVEN
Model GMC275PDB5
Near Riverside, CA 92508
Robert U.
Job Details:
04/28/2025
Found the dispenser on the control fades in and out. I checked power that the terminal block and is constant 250. I checked power at the transformer that powers the main control and 123 volts coming in and 23-24 volts coming out constant. The unit need a new main control to start. The control is discontinued. ; ordrng 1 4452889 (Control electric)
We serviced a
FRIGIDAIRE RANGE
Model PCFG3670AF
Near Riverside, CA 92506
Robert U.
Job Details:
04/28/2025
Found the blower not rotating freely and is receiving voltage but because of lack of rotation the sensor is turning the oven off prematurely as a safety. I gained access to the blower blades and they are not turning freely. Also the door is staying open about a quarter of an inch. Will order all parts needed to all issues. The door parts are on back order so the office will be reaching out to reschedule. ; ordrng 1 5304527479 (Blower) and 2 5304531573 (Hinge door)s and 2 5304527463 (Hook door hinge)s and 1 5304527499 (Shock absorber rh) and 1 5304527500 (Shock absorber lh) and 1 5304527705 (Bracket lh) and 1 5304527706 (Bracket rh)
We serviced a
MAYTAG WASHER
Model MVWB835DC3
Near Riverside, CA 92501
Robert U.
Job Details:
04/28/2025
Found the unit is making an abnormal clicking sound during the wash cycle. The bolt that was loose and reason for the issue on last visit was still installed and in place. This is a different issue the. A month ago. The transmission shaft for the wash plate and too play and is causing in the noise internally in the gearcase. Also the basket and wash plate itself have play when they should be nice and tight. Ordering all parts needed to resolve issues and may require an authorization. ; ordrng 1 W10902814 (Wash plate) and 1 W10752187 (Screw) and 1 W10909670 (Nut spanner) and 1 W10811960 (Basket) and 1 W11393685 (Gear case) and 1 W10734521 (Slider) and 1 W10915701 (Rotor) and 1 W10754448 (Clutch)
We serviced a
JENN-AIR MW OVEN COMBO
Model JMW2430LL02
Near Altadena, CA 91001
Oscar L
Job Details:
04/28/2025
Visual and physical inspection leaded me to a burnt out thermostat from inner lock harness. Replacing it recommended. Patrick will help tagging the right part number to this ticket.; O-emld tckt
We serviced a
MAYTAG WASHER
Model MVWC565FW1
Near Bakersfield, CA 93304
Jim
Job Details:
04/28/2025
"Unit will not run. Upon arrival I found that the drive pulley and belt had come apart. I also found that the cover was missing ( I did find pieces of it). The drum supports are weak and causing both an out of balance and the transmission to hit the floor. The inner basket has too much wobble; ordrng 1 WPW10427633 (Shield) and 2 W11573574 (Screws)s and 1 W10528947 (Hub nut) and 1 W11130362 (Suspension), used 1 W10721967 (Cam), and 1 W11239857 (Belt) from stock"
We serviced a
FRIGIDAIRE RANGE
Model FCRG3052BSD
Near Arvin, CA 93203
Jim
Job Details:
04/28/2025
"Through a translator the customer is stating that the flame is too high on the left side and that PG@E says that it can release high carbon monoxide into the house. I turned on the gas and tested the cooktop and oven. The cooktop left rear burner has a flame lifting from under the burner. Ordering burner and gas line. The household cob on monoxide alarm went off during the test; ordrng 1 5304533593 (Burner) and 1 5304533853 (Orifice 10k) and 1 5304533596 (Cap) and 1 5304506548 (Valve) and 1 5304528309 (Tube gas) and 1 5304498819 (Regulator), O-SMS tckt"
We serviced a
GENERAL ELECTRIC DRYER
Model GTD42GASJ3WW
Near Bakersfield, CA 93307
James
Job Details:
04/28/2025
Installed new harness and tested unit not powering on. No voltage between X and B on timer. Inspected and tested power coats. Reverse polarity found at mulligan connector to power cord. Tech line Mike suggested replacing power cord and possible having cx get out.et inspected by electrician to confirm proper polarity.Ordering new power cord as instructed by techLine. File number 16492828; ordrng 1 WE26M345 (POWer cord)
We serviced a
WHIRLPOOL WASHER
Model WFW560CHW4
Near Bakersfield, CA 93305
Ian Y
Job Details:
04/28/2025
Found units door unable to unlock. Ordering new lid lock and will bring back pump. Also instructed customer to take the hose off the back of his unit and empty all stagnant water out. UNABLE TO GET MODEL SERIAL PIC DUE TO DOOR BEING LOCKED WILL GET PIC ON RETURN VISIT. ; ordrng 1 W11469919 (Door lock)
We serviced a
GENERAL ELECTRIC WASHER
Model GFW510SCN2WW
Near Bakersfield, CA 93308
Ian Y
Job Details:
04/28/2025
Found unit completely dead. Wall was 120v. Ordering new control and will need second man to safely remove dryer. ; ordrng 1 WH22X32058 (Main control) and 1 WH22X32060 (Ui board)
We serviced a
WHIRLPOOL WASHER
Model WFW95HEDW0
Near Los Angeles, CA 91602
Ron H
Job Details:
04/28/2025
Found error codes F3E1 F9E1 F6E3 F8E3 codes for pressure switch and long and also ACU comuncation error cx stated unit will stop mid cycle and take long time for door to unlock and drain pump still running will have to unplug unit to reset it Odering control and pressure switch; ordrng 1 W11032117 (Control) and 1 WPW10448876 (Pressure switch)
We serviced a
GENERAL ELECTRIC MICROWAVE OVEN
Model PVM9179SR1SS
Near Ojai, CA 93023
Kenneth
Job Details:
04/28/2025
Unit not heating. Found connection at magnetron burnt and melted from the the transformer. Ordering new Hv parts. Transformer. Magnetron. Capacitor and diode. ; ordrng 1 WB27X44106 (Magnetron) and 1 WB27X11033 (Capacitor) and 1 WB27X35382 (Diode) and 1 WB26X35402 (Transformer)
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Tracy, CA 95304
William
Job Details:
04/28/2025
"Special project #S15110, updated timer sent with knob missing, reordered timer & knob for unit. Collected service fee only. $145.00 CC Auth# HV3W9V; ordrng 1 W11685947 (Timer)"
We serviced a
WHIRLPOOL WASHER
Model WTW5015LW0
Near Oceano, CA 93445
George
Job Details:
04/28/2025
Installed part tested still squealing need Gearcase and washplate.; ordrng 1 W11449840 (Gearcase) and 1 W11550891 (Agitator)
We serviced a
MAYTAG WASHER
Model MVWB865GW0
Near Los Alamos, CA 93440
George
Job Details:
04/28/2025
F7e5. F3e2. F8e6. Found washer with few errors customer has washer connected to only cold water hot and cold. Need control to complete service.; ordrng 1 W11401710 (Control)
We serviced a
KITCHEN AID DISHWASHER
Model KDTE304LPA1
Near Madera, CA 93637
David C
Job Details:
04/28/2025
Replaced after replacing valve found f7e2 unit will need sump ordering sump; ordrng 1 W11460946 (PUMP & MOTOR)
We serviced a
MAYTAG WASHER
Model MVWC565FW2
Near Los Banos, CA 93635
David C
Job Details:
04/28/2025
Went to replace drive hub and tub found transmission shaft bent will have to order gearcase; ordrng 1 W11454734 (GEAR CASE)
We serviced a
GENERAL ELECTRIC WASHER
Model GTW465ASN2WW
Near Fresno, CA 93701
Timothy
Job Details:
04/28/2025
Ran an agitation and spin test. On spin the clutch slipped at the very beginning . Replaced shifter and belt. Tested and heard a similar issue. Unit needs a clutch and transmission pulley. If it still slips a gearcase will be needed.; ordrng 1 WH03X32097 (TRANSMISSION PULLEY & NUT) and 1 WH05X24185 (CLUTCH)
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FFHT2022AW0
Near Bakersfield, CA 93307
James
Job Details:
04/28/2025
WarrantyDefrost timer stuck causing unit to not cool. Ordering new defrost timer. ; ordrng 1 5304526183 (Timer)
We serviced a
WHIRLPOOL DISHWASHER
Model WDF341PAPM2
Near Camarillo, CA 93012
Isidro
Job Details:
04/28/2025
"Rusted top and bottom racks, correcting issue by; ordrng 1 W11752368 (Top rack)"
We serviced a
MAYTAG WASHER
Model MVW6200KW0
Near Hanford, CA 93230
Enrique
Job Details:
04/28/2025
"Technical Service Pointer #: W11750573 Rev. BAction Required: MandatoryRelease Date: September, 2024. (F9e1) Pump broken harness. I will take actuator incase I needed. ; ordrng 1 W11569161 (HARNS-WIRE) and 1 W10913953 (Actuator)"
We serviced a
SPEED QUEEN WASHER
Model AWNE9RSN116TW01
Near Tulare, CA 93274
Enrique
Job Details:
04/28/2025
Washer valve keeps dripping when not in use and lid lock does not work all the time. Need both parts. CUSTOMER REQUEST AFTER 2:00 APPOINTMENT.; ordrng 1 205222 (Lid Lock Kit) and 1 203741 (Mixing valve)
We serviced a
WHIRLPOOL WASHER
Model WTW4955HW3
Near Los Angeles, CA 91602
Ron H
Job Details:
04/28/2025
Tested unit found no error ran automatic test mode passed all test but the drain pump came on was able to turn off when open lid drain pump will come on ordering control unit has s code for control; ordrng 1 W11608056 (Control)
We serviced a
KITCHENAID REFRIGERATOR
Model KSSC42QMS03
Near Los Angeles, CA 91403
Ron H
Job Details:
04/28/2025
Found shaft rounded out on ice bin causing it not to dispense ice odering drive shaft; ordrng 1 WP2188917 (Shaft)
We serviced a
MAYTAG WASHER
Model MHW3505FW1
Near Los Angeles, CA 91606
Ron H
Job Details:
04/28/2025
Found f3e1 code cx stated after repair worked then popped same code odering control and pressure switch; ordrng 1 W11201284 (Control) and 1 WPW10448876 (Pressure switch)
We serviced a
GENERAL ELECTRIC REFRIGERATOR - S
Model GSS25GYPFS
Near Rancho Cucamonga, CA 91701
Javier V
Job Details:
04/28/2025
Customer will be rescheduled due to needing fill tube ice maker due to ice getting stuck and not dispensing ; ordrng 1 WR17X11168 (Fill line)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT318FZDW10
Near Santa Clarita, CA 91321
Bob S.
Job Details:
04/28/2025
Gave customer a 40 minute call ahead upon arrival knocked on door customers instructions were that if they were unavailable to leave a card on their door. Left card on door ; O-emld tckt
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Empire, CA 95319
Timothy G
Job Details:
04/28/2025
Inspected unit and found change wedged in washplate/ agitator. Removed change and explained why unit was not starting. Unit is now starting and shifting properly. Ran recalibrated and unit is completed.
We serviced a
MAYTAG DRYER - GAS
Model MGD4500MW1
Near Simi Valley, CA 93063
Richard R
Job Details:
04/28/2025
"SERVICE POINTER S-CODE S15110Upon arrival, replaced timer with a recall, this is covered under a service pointer with an S code to replace timer unit is now working as intended heating as intended. All operations are normal job complete."
We serviced a
WHIRLPOOL VENTHOODS
Model UXT3030ADB2
Near Camarillo, CA 93012
Richard R
Job Details:
04/28/2025
"Upon arrival found Fan motor turning on, but fan not spinning removed filter screen found fan blade pushed all the way up against the screw, not allowing it to turn was able to remove fan blade and install it correctly tested unit unit is now flowing and venting as intended. All operations are normal job complete."
We serviced a
MAYTAG DRYER
Model MGD4500MW1
Near Port Hueneme, CA 93041
Isidro
Job Details:
04/28/2025
"I found a Noisy unit, I installed new dryer repair kit unit is now spinning smoothly as designed at this time of service , cx approved repair and service ; used 1 4392065 (Maintenance kit) from stock"
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FRFN2813AF0
Near Modesto, CA 95354
Timothy G
Job Details:
04/28/2025
Mullon was not catching.adjusted and unit is now closing per design job complete.
We serviced a
WHIRLPOOL WASHER
Model WTW4850HW1
Near Camarillo, CA 93010
Richard R
Job Details:
04/28/2025
"Upon arrival, inspected unit found unit to shift from agitate to spin replaced actuator and cam retested unit unit passed all tests and his organ as intended also reprogrammed control board with a factory calibration job complete; used 1 W10721967 (Cam) from stock"
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Bakersfield, CA 93306
James
Job Details:
04/28/2025
Broken wire to drain pump causing pump to fail. Replaced harness and pump. Unit now working as intended.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT311FZDW06
Near Simi Valley, CA 93065
Richard R
Job Details:
04/28/2025
"Upon arrival, inspected unit found unit cooling in freezer compartment, but not cooling in fresh food found major ice buildup on evaporator and evaporator cover removed. It found a clogged drain used steamer defrosted entire evaporator tested heater heater is working during further inspection. I found that the connection from the evaporator fan to the harness was not connected at all was able to connect it. Evaporator fan started working. All operations are normal now advised customer to give at least 12 to 24 hours for the unit to reach proper temperatures. All operations are normal job complete."
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Rosemead, CA 91770
Jordin Rogers
Job Details:
04/28/2025
"Customer states unit is not drying dishes, tech explained that the unit has a plastic tub and wont dry the dishes as good as a steel tub would. Found one of the connections at the heater was not connected. Fixed connection and unit tests fine"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Tulare, CA 93274
Enrique
Job Details:
04/28/2025
Customer concerns: water leaking during fill cycle and leaking air gap. valve (dripping) and found clogged drain hose. Installed new valve and removed obstruction. Dishwasher operating as designed. No leaks.
We serviced a
MAYTAG WASHER
Model MVW7230HW0
Near Riverside, CA 92509
Chris
Job Details:
04/28/2025
Diagnosis found failed control. Replaced control unit now running to specs.
We serviced a
AMANA WASHER
Model NTW4516FW3
Near Somis, CA 93066
Isidro
Job Details:
04/28/2025
"F8e1 long fill, f7e5 shifter faulty, I installed and secured new actuator and water dual valve then calibrated the machine, ran diagnostics test and its now agitating and spinning properly as designed"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Bakersfield, CA 93309
Jim
Job Details:
04/28/2025
Dispenser door will not stay closed. I replaced the dispenser and unit tested ok.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ06
Near Ceres, CA 95307
Timothy G
Job Details:
04/28/2025
Dispensing door was needing to be closed manually. Replaced with new and unit is now opening and closing per design
We serviced a
WHIRLPOOL WASHER
Model WFW5605MW0
Near Glendora, CA 91741
Jaime
Job Details:
04/28/2025
Found a torn doors boat. Had it replaced
We serviced a
MAYTAG DRYER
Model MED5630HW2
Near Paso Robles, CA 93446
Jack
Job Details:
04/28/2025
No codes on unit. Testing unit with a load. Seeing if it makes same noise. Customer is going to do and full cleaning and unit should be working as designed no. Job completed. https://app.iwallet.com/a/4c825aed1cb5
We serviced a
MAYTAG WASHER
Model MVWC565FW2
Near Escalon, CA 95320
Martin R
Job Details:
04/28/2025
Found bad cam and actuator replaced cam and actuator tested unit washer is filling agitating draining and spinning per design job complete
We serviced a
KITCHENAID DISHWASHER
Model KDTE104KPS1
Near Bakersfield, CA 93314
ERICK H
Job Details:
04/28/2025
Cx states loud rattling noise during the first couple of minutes of cycle them again about ten minutes into cycle. Cx doesnt have video of noise. Cx also states noise hasnt happened in a few days. Started rinse only cycle. Started and cancelled 3 cycles. Couldnt replicate noise. Obstruction must have worked its way through. Inspected and cleaned filter in sump. Filter had pieces of broken plastic from something washed in unit. They were not pieces of the dishwasher. There was also big chunks of food and broken tooth picks. Removed drain pump after to further inspect. No obsteuctions found in drain pump at this time. Unit operating as designed. Job complete.
We serviced a
MAYTAG WASHER
Model MHW8630HC3
Near Glendale, CA 91205
Oscar L
Job Details:
04/28/2025
"Because of a constantly leaking inside the dispenser drawer situation, valves and dispenser drawer have been replaced."
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Modesto, CA 95350
Timothy G
Job Details:
04/28/2025
Inspected unit and found f0e5 codes. Off balance. Ran tests and found that water valve was slowed. Replaced *water valve* and unit is now working per design. Cx instruct for proper settings for deep water. Also for rinse settings. Fabric softer function. Cx approved repairs. Job completed.
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FFHT2045VWB
Near La Puente, CA 91744
Jaime
Job Details:
04/28/2025
Had to adjust shelves specially bottom one. Also a Dors bottle Hage tighten
We serviced a
KITCHEN AID REFRIGERATOR
Model KRMF706EBS05
Near Bakersfield, CA 93308
Ian Y
Job Details:
04/28/2025
"Activated service test to fill icemaker. Says valve never opened so I replaced it and retested, icemaker filled with water on second test. Unit should be harvesting ice within a couple of hours."
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ0
Near Manteca, CA 95337
William
Job Details:
04/28/2025
"F7E1, found open heater element, replaced heater element, ran self diagnostic cycle, unit operating as designed"
We serviced a
MAYTAG WASHER
Model MVWC565FW2
Near Los Banos, CA 93635
David C
Job Details:
04/28/2025
Found agitator loose causing off balance loads re tightened also instructed CX on proper loading technique
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FFTR1814WBC
Near Bakersfield, CA 93305
Jim
Job Details:
04/28/2025
Unit not cooling properly. Upon arrival I found that the defrost timer was sending power both to the compressor and heater. Replaced timer. Unit tested ok.; used 1 5304526183 (Defrost timer) from stock
We serviced a
MAYTAG WASHER
Model MVWB835DW4
Near Bakersfield, CA 93308
Ian Y
Job Details:
04/28/2025
"Removed and replaced units slider. Tested, unit no longer making unnatural noise."
We serviced a
WHIRLPOOL REFRIGERATOR
Model GR2SHKXKQ00
Near Los Angeles, CA 91401
Ron H
Job Details:
04/28/2025
Found leak in evaporator but do not make the evaporator for this unit anymore
We serviced a
MAYTAG WASHER
Model MVW7232HW2
Near Modesto, CA 95350
Timothy G
Job Details:
04/28/2025
Arrived and unit is working but slider has separated causing unit to fail. Replaced **slider** and unit is now shifting. Passed all tests. Cx unit works sometimes. Issues are corrected. Job completed.
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF536RPS00
Near Thousand Oaks, CA 91362
Richard R
Job Details:
04/28/2025
"Upon arrival, inspected unit found unit with no error code in diagnostics unit passed all tests and diagnostics. Checked for freezing in fill tube. No frozen water and fill tube unit filled the mold correctly. Unit was having a possible UI issue as well. Replace user interface retested unit unit passed all test. I have already replaced the main control boardthe power supply board the icemaker twice and the UI unit is operating as intended also added the second fan adapter for the icemaker job complete."
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Oxnard, CA 93033
Isidro
Job Details:
04/28/2025
"Customer states unit will wash fine one time then, tries to wash again and its leaving clothes wet, over load error f0e3, calibrated the machine ran diagnostics test and its spinning n operating as designed at this time of service"
We serviced a
MAYTAG WASHER
Model MVW4505MW2
Near Tulare, CA 93274
Enrique
Job Details:
04/28/2025
"Washer was not draining. Found no broken wires. Incoming voltage to pump 120vac. Installed new pump, performed calibration. Washer operating as designed. No leaks."
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ3
Near Redlands, CA 92373
Chris
Job Details:
04/28/2025
"Diagnosis found, failed dispenser replaced with new part unit now running to specs"
We serviced a
WHIRLPOOL DRYER
Model LGQ9508PW0
Near Calimesa, CA 92320
Rod
Job Details:
04/28/2025
"Drum wont turnConfirmed found worn roller support kit. ******Replaced rollers, belt and idler kit.*********Designed operation was restored and no gas leaks."
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Yucaipa, CA 92399
Chris
Job Details:
04/28/2025
Diagnosis found failed heater replaced now running to spec
We serviced a
MAYTAG REFRIGERATOR
Model MSS25C4MGZ06
Near Modesto, CA 95356
Timothy G
Job Details:
04/28/2025
Inspected dispenser and ice bin found teeth broken off of the bottom of ice bin. Replaced ice bin with great pre id part. Job completed
We serviced a
MAYTAG REFRIGERATOR
Model MSS25C4MGZ09
Near Yucaipa, CA 92399
Chris
Job Details:
04/28/2025
Replaced failed part unit now running to specs
We serviced a
WHIRLPOOL DRYER
Model WGD6620HW1
Near La Puente, CA 91744
Jaime
Job Details:
04/28/2025
Had the new panel installed dryer works OK now
We serviced a
MAYTAG WASHER
Model MVW6200KW0
Near Oxnard, CA 93030
Isidro
Job Details:
04/28/2025
"Sound like a jet taking off, bad gear case bearing making loud noise, Installed new Gearcase and agitator, calibrated the machine ran diagnostics test and its now spinning smoothly as designed at this time of service, cx approved repair"
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Fresno, CA 93702
Timothy
Job Details:
04/28/2025
Installed capacitor and ran a spin cycle to verify the motor was now turning. Unit checks ok.
We serviced a
KITCHEN AID DISHWASHER
Model KDTM604KPS2
Near Burbank, CA 91505
Oscar L
Job Details:
04/28/2025
"After replacing water inlet tank and valve, units functionality was successfully achieved."
We serviced a
FRIGIDAIRE REFRIGERATOR
Model GRFS2853AF0
Near Bakersfield, CA 93306
ERICK H
Job Details:
04/28/2025
Defrosted ice maker evaporator. Replaced harness. Instructed Cx to give unit 24 hours to start producing ice. Unit operating as designed. Job complete.
We serviced a
KITCHEN AID REFRIGERATOR
Model KRMF706ESS04
Near Riverside, CA 92508
Robert U.
Job Details:
04/28/2025
After replacing all parts ordered I verified operation of the new blower fan for ice protection and it is now operating properly. This gasket is now sealing after replacement. All controls are operating as well. All functions restored. We dumped the ice container to verify ice production is making it properly and not clumping. Job completed.
We serviced a
GENERAL ELECTRIC WASHER
Model PTW600BSR1WS
Near Patterson, CA 95363
Nick D
Job Details:
04/28/2025
"Soap dispenser top lip was not in the metal railing, reinstalled dispenser on correctly and tightened railing, cx visually inspected dispenser after repair."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ00
Near Modesto, CA 95355
Timothy G
Job Details:
04/28/2025
Replaced failed evaporator fan and light. Unit is now working per design advise 24 hrs to properly cool. Job completed
We serviced a
FRIGIDAIRE DISHWASHER
Model FFCD2413US6B
Near Bakersfield, CA 93308
James
Job Details:
04/28/2025
Found debris under float causing unit to not fill. Cleared float and u it is working as intended at this time.
We serviced a
MAYTAG WASHER
Model MVW5035MW1
Near Los Angeles, CA 91406
Oscar L
Job Details:
04/28/2025
"As the two pre diagnosed parts and components were replaced, unit resumed to normal operation."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ03
Near Los Angeles, CA 91042
Oscar L
Job Details:
04/28/2025
"Because of physical damages, the pre ided gaskets were placed."
We serviced a
WHIRLPOOL WASHER
Model MVW7230HW0
Near Arroyo Grande, CA 93420
George
Job Details:
04/28/2025
Installed thatch tested lock ok unlock ok complete .
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near La Crescenta-Montrose, CA 91214
Oscar L
Job Details:
04/28/2025
"As most of previously diagnosed parts and composers replaced, machine has resume to normal operation."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ10
Near Arroyo Grande, CA 93420
George
Job Details:
04/28/2025
Installed parts tested check out ok complete.
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS01
Near Arroyo Grande, CA 93420
George
Job Details:
04/28/2025
Found Ui intermently shutting off found torn harness customer ok estimate paid total installed part tested ok complete.
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near La Puente, CA 91746
Jordin Rogers
Job Details:
04/28/2025
Installed all parts unit is testing fine. Could not get slider core since its still on gearcase. Screw for gear case was stripped so Jo had to hammer old rotor off to get to screws for clutch.
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Bakersfield, CA 93304
James
Job Details:
04/28/2025
Stalled new acu and harness. Ran diagnostics and unit is now working as intended at this time.
We serviced a
MAYTAG DISWASHER
Model MDB4949SKZ2
Near Modesto, CA 95356
Martin R
Job Details:
04/28/2025
Replaced drain hose per tech line Cx will let us know if unit still gets error code Job complete
We serviced a
JENN-AIR REFRIGERATOR
Model JS42NXFXDE01
Near Redlands, CA 92373
Rod
Job Details:
04/28/2025
l***Installed led light modules per LED Lighting ***Concerns - W11606409 - Special Project S84638 - ***W11683242 - LED Replacement.Parts cover per CONCESSIONS - J1DULX0DPL1 - COVERS SERVICE + P&LSr# 7741422525 Kelley wfcc techline W11632139Control board issueburnt led power supply board.Labor charge only
We serviced a
WHIRLPOOL DRYER
Model WED5720RR0
Near Delhi, CA 95315
Nick D
Job Details:
04/28/2025
"Door latch replaced, door hinge screws tightened."
We serviced a
MAYTAG WASHER
Model MVW7230HW0
Near Fresno, CA 93722
David C
Job Details:
04/28/2025
Replaced slider tested unit unit working as designed
We serviced a
WHIRLPOOL WASHER
Model WTW8127LW1
Near Newman, CA 95360
Nick D
Job Details:
04/28/2025
"Washer body wobbles, leveled all 4x feet washer body is stable, no fault codes on service mode.Cx complaint washer was not filling up or washing clothes.Chked inlet,debris found on valve, water preassure is good on H&C hoses and inlet fill.Cx instructions to either use AUTO or Deep fill for better wash and more water, cx had settings set to medium fill, not getting enough water in tub.Agitator fast speed and spin high speed both working at proper rpms"
We serviced a
WHIRLPOOL WASHER
Model WTW4955HW3
Near Modesto, CA 95357
Timothy G
Job Details:
04/28/2025
Replaced faulty control.new control had a broken tab for power button and I needed to separate old control housing and put new board inside old housing. Unit passed all tests. Job complete
We serviced a
WHIRLPOOL WASHER
Model WFW6720RW0
Near Santa Maria, CA 93455
George
Job Details:
04/26/2025
Installed part test check out ok complete
We serviced a
WHIRLPOOL RANGE
Model WFG505M0MS0
Near Los Banos, CA 93635
David C
Job Details:
04/26/2025
Replaced grate unit is as designed
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HS10
Near Lathrop, CA 95330
William
Job Details:
04/26/2025
"Replaced interlock assys & fuse, found diode wired wrong to cap, corrected wire connections, ran water heating test, unit operating as designed"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ0
Near Fontana, CA 92336
Javier V
Job Details:
04/26/2025
Job complete. Installed all parts needed on unit after run multiple test and make sure that unit unit started and also that sump assembly turned on everything OK
We serviced a
MAYTAG DRYER
Model MGD7230HW3
Near Bakersfield, CA 93304
James
Job Details:
04/26/2025
"Removed blower shroud and found lint buildup causing rumbling noise, cleared blockage and replaced coils. Reassembled and tested. Unit now working as intended at this time. Advised cx to enlarge venting tube in wall to march vent diameter to allow for better air flow."
We serviced a
WHIRLPOOL REFRIGERATOR
Model KRFF577KPS02
Near Riverside, CA 92506
Robert U.
Job Details:
04/26/2025
Found after replacing the ice maker and heater water is now able to make it to the ice maker for ice production. It will take 24 to 48 hours for the ice container to fill without use during that time. All functions restored and working. Job completed.