Visual and physical inspection showed a very kinked regulator to manifold tubing.Replacing such recommended ; ordrng 1 W11680399 (Tubing from regulator to manifold)

"After the replacement of all pre diagnosed components, the unit functionality was successfully tested.Now the RF burner base needs replacement because is missing an air gap and not lighting up as quick as the rest of them. Part number W11366282 burner kit. FYI Consumer is ok if we just send it to him.; ordrng 1 W11366282 (Burner kit.)"

"Visual and physical inspection were performed and because of a dead state of the UI, I wasnt a let o run diagnostics but, I was able to confirm the right voltage is coming n and all connectors were properly installed. That being said, I am recommending the UI and controller for replacement. Also created an estimate and presented to customer whom has agreed upon and deposited $600.00 as a down payment.; ordrng 1 W11400283 (UI Panel) and 1 W11294388 (Controller)"

"Visual and physical inspection showed a noisy wax motor, took it apart and the inside diffuser was floating. Also, theyre was a noisy coming from the diverter disc, so I have reinstalled the was motor diffuser as per specs and replaced the wash pump. Retest the unit and it worked as designed"

"Because of a broken roller in one of the adjuster, a new set of new mid rack adjusters was replaced."