Unit was getting a f9E1 error code. Upon diagnosis I found the air gap to be full of debris.

Replaced both the cover and switch. Unit is working as designed at this time.

"Upon arrival, inspected unit found unit not wanting to start all the time opened unit found door switch. Connector was not all the way connected possibly losing connection after vibrations. This probably occurred during shipping was able to reconnect. It tested unit. Unit is now working and operating as intended."

The water dispenser gets stuck at times. Ordering the switch and cover since this keeps happening to them .; ordrng 1 W11243624 (Cover) and 1 WP12575502 (Switch)

Upon arrival inspected unit ran multiple tests with tech-support on the line. Tech-support is advising to replace UI appliance manager and pumps. We have already replaced the UI harness and electronic control. Please schedule this on a three job count when we get the parts. The use the interface is PSP but we need this at a a.m. call three call count to be on the phone with tech-support to run checks.; ordrng 1 W11353849 (Ui) and 1 W11354234 (Electronic control) and 1 W10586915 (Pumps)