"UNDER WARRANTY- CX stated, THE AGITATOR BROKE. Balance ring on spin tub is broken, agitator screws broke off in gear case shaft. Suspension rods are worn out. ; ordrng 1 WH16X26910 (ROD & SPRING ASM RIGHT) and 1 WH16X26911 (ROD & SPRING LEFT) and 1 WH03X34937 (PLATFORM BEARING RETAINER & FASTENERS) and 1 WH21X34217 (Basket) and 1 WH43X34257 (Base) and 1 WH02X24374 (Screw) and 1 WH01X27538 (Belt)"

"STUCK IN DRAIN CYCLEFailed pressure switch on ACU, stuck on flood mode. ; ordrng 1 W11603810 (CONTROL)"

"Installed lead lock, speed sensor, and belt wire tie. Tested unit, passing all test, spinning and agitating. Working to manufacture,specs, job complete."

Space sensor wire are broken and lid. Lock is not functioning all the time failing test.. return with parts to install and recheck.; ordrng 1 WH03X32158 (Speed sensor) and 1 WH08X37937 (Lid lock kit) and 2 WH01X10704 (Wire tie)s

"Suspension is bad will not balance , ordering suspension rods. Will return to install suspension. ; ordrng 2 WH16X26911 (Suspension rod)s and 2 WH16X26910 (Grn suspension rod)s"