"Upon arrival, inspected unit found unit with no error code in diagnostics unit passed all tests and diagnostics. Checked for freezing in fill tube. No frozen water and fill tube unit filled the mold correctly. Unit was having a possible UI issue as well. Replace user interface retested unit unit passed all test. I have already replaced the main control boardthe power supply board the icemaker twice and the UI unit is operating as intended also added the second fan adapter for the icemaker job complete."

"Upon arrival inspected unit customer stated that when opening the refrigerator door, the light would not turn on remove the light switch. Found that one of the connectors had come off. I reinstalled the connector and crimp it nice and tight retested unit units. Light is now working in fresh food compartment unit is cooling as intended as well. All operations are normal job complete."

Upon arrival inspected unit found compressor not running at all. Tried to put it in diagnostics to get the compressor to run. Unit would not run replaced inverter control box retested unit unit begun to cool has good heat exchange advised customer to give at least 24 to 48 hours before putting any perishable items inside the unit all operations are normal job complete

CX said the unit wasnt working properly. Upon diagnosis I found the the unit to have a stuck button. I uninstalled the ribbon and reinstalled. Unit is working as designed as designed at this time.

"Upon arrival, inspected unit found unit giving an F8e1 error code low flow inspected drain pump found some obstructions and drain pump. Inspected all water valves valves were working as intended. bad replaced pressure sensor and cleaned out drain retested unit unit passed all test and is working as intended. Customer paid $519.47 for service call parts and labor advised customer that part is warranty for one year labor is warranty for 90 days. Service call is warranty for 30 days. All operations are normal now job complete."