"Upon arrival found unit with noise coming from the inside of the unit. Check the unit and found the left rear roller was loose, causing the noise. Adjust the roller and retest the unit now is working properly. Job complete."

Remove the old compressor and drier filter. Install new compressor and filter on the unit. Pressurize the system and no leaks found at this time. Vacuum the system and unit holds the vacuum. Recharge the system with 55 g of refrigerant R600a. Retest the unit and now compressor is run properly. Job complete.

"Upon arrival found unit making a loud noise coming form the back of the unit. Check the unit and run into diagnostic, test 4 and the compressor is the one is making the noise. This compressor is more loud than normal, causing the failure. This unit will need new compressor. ; ordrng 1 W11580057 (Compressor) and 1 W11109499 (Drier)"

"Upon arrival found unit with error code F2E1 and F3E2, this about stuck button and open or short moisture sensor. Check the unit, run test cycle and moisture sensor pass the test. This unit has a bad ACU according tech sheet. Replace the ACU on the unit. Retest and now is working properly. Job complete"

"Upon arrival found unit making a noise, check the unit and noise is coming form the drain pump area. Remove drain pump and found a pice of glass causing the noise. Remove the glass. Retest the unit and now is working properly. Job complete"