Customer has a defrost problem again in the same spot. I want to replace the control board since I replaced the evaporator fan motor last time. As well as call and report this to Tech Line. Reschedule customer for next available appointment for them.; ordrng 1 W10849460 (UI) and 1 W10843055 (Control)

"Upon arrival, inspected unit found unit with completely full of water. Unit would kick into drain and then kick out of drain. Check for kinks in pressure line found no kinks. Unit seems to be having a pressure sensor issue on main control board. Ordering lower wire harness, main control board and suspension you need it covered in manufacturer warranty zero dollars was collected.; ordrng 1 W11603810 (Main control) and 1 W10780045 (Suspension) and 1 W11652038 (Lower wire harness)"

"Upon arrival, inspected unit found unit with multiple parts failing ordering main control board lower wire harness, thermal cut off high limit cut off and igniter unit is covered under manufacturer warranty. Zero dollars was collected.; ordrng 1 WP8573713 (Thermal cut off) and 1 WP3391912 (High limit) and 1 279311 (Igniter) and 1 W11782455 (Electronic control) and 1 W11556660 (Main wire harness)"

"Upon arrival, removed timer and knob replaced timer and knob with new parts tested unit. Unit is now operating as intended. Unit is covered under speed queen warranty zero dollars was collected job complete."

Replacing vacatur fan motor wire harness assembly. Defrosted evaporator. Unit is working as designed at this time.