Appliance Repair Madera California
Appliance Repair Specialists Rated 4.6 out of 5 stars based on 196 customer reviews
We serviced a
WHIRLPOOL OVEN
Model WOES5030LZ00
Near Madera, CA 93636
Timothy
Job Details:
01/14/2025
Replaced outer oven door glass and sticker.
We serviced a
FRIGIDAIRE RANGE
Model FGMC2765PFK
Near Madera, CA 93636
David C
Job Details:
01/14/2025
Replaced magnetron and diode tested unit unit working as designed
We serviced a
MAYTAG WASHER
Model MVW6230HW1
Near Madera, CA 93638
David C
Job Details:
01/14/2025
Unit needs lid lock ordering lid lock with square trade; ordrng 1 W11700916 (Lid lock)
We serviced a
GENERAL ELECTRIC RANGE
Model GRF400SV1SS
Near Madera, CA 93638
Timothy
Job Details:
01/13/2025
"The LH burners are not heating. Lifted cooktop and took pictures of both burners. They have opened where roaches have crawled over them when they were energized. Called TAG 15456476 to see how they want to proceed. * . They have documented the infestation for further reference. Providing an estimate for repair, as long as the infestation is present this will be an issue. Parts warranty are void if this reoccurs with the newly installed part.; ordrng 1 WB30X47329 (FL burner) and 1 WB30X47331 (RL burner)"
We serviced a
KITCHENAID REFRIGERATOR
Model KRSF705HPS05
Near Madera, CA 93636
David C
Job Details:
01/10/2025
Valves were defective ordering new valves ; ordrng 1 WPW10341320 (Valve)
Reynaldo Dominguez
Madera, California
WHIRLPOOL WASHER
WTW4816FW3
Very professional, And neat and impolite.
12/05/2024
JTC
Madera, California
GENERAL ELECTRIC WASHER
GTW485ASWOWB
Very happy with the service
11/14/2024
Cortney
Madera, California
FRIGIDAIRE DISHWASHER
FGID2466QF6A
Friendly and great/quick service!
11/05/2024
Madera, California
WHIRLPOOL RANGE
WCGK5036PS00
Tim was professional and was able to fix the issue quickly and answer all questions
09/27/2024
Madera, California
MAYTAG WASHER
MVW6230HW1
Johnathan: this is Tim Fringer answering you I have nothing ill to say about your response or service other than you appear to have a very strict schedule. I feel that the fact we have experienced so many failures, it is my experience that it does not allow enough time for problem analysis.
That being said. I have to report to you that we still have a problem! After approx 8 loads of wash . We are hearing a loud noise while agitate cycle is operating, sounds like a striped ratchet.
Sounds very similar to our previous failures!
I would appreciate your input as we do not feel we are operating it incorrectly, we have had the machine for a long time, and our use procedure haven’t changed.
So I think you or someone should come and figure out the problem and correctly address it.
Waiting for your response Tim Fringer
09/27/2024