In warranty. Cx states unit not washing. Motor has failed. Replaced wash motor. Tested unit. Unit operating as designed. Job complete.

"Customer states unit isnt working, water is remaining in the tub and is continuously draining but not water is going out. In warranty. Install the new control board on the unit. Retest and now is working properly. Job complete"

"In warranty. Customer states unit is leaking water form the top left section of the ice maker box. Check the unit and found water marks on those plastic components. Remove the top cover of the unit. Check the unit and found water is coming form the ice maker overfill, readjust the water going to the ice maker. And now unit is working properly. Job complete"

"In warranty. Customer states unit isnt working, water is remaining in the tub and is continuously draining but not water is going out. Check the unit and found noise is coming from the drain pump. Check the drain pump and found a nail stock in the impeller causing the problem, with water remaining. Remove the nail and retest, water was draining but, draining pump keeps draining this unit has a defective pressure sensor on the board. Unit will need new control board. ; ordrng 1 W11116592 (Control board)"

In warranty. Customer states unit isnt turning on and outlet has power. Check the unit and found unit isnt having power to the main board. Check the thermostat and is bad causing the failure. Replace the high limit thermostat and now unit is working properly. Job complete