Slider magnet was disconnected from the slider causing excessive noise. Replaced slider and noise issue is now resolved.

"Door lock is not functional. I also have inverter failure faults present.ordering inverter, board and door lock.; ordrng 1 WH22X37837 (Control board) and 1 WH01X29528 (Door lock) and 1 WH22X35837 (Inverter board)"

Control board is malfunctioning during towels cycle and dispensing all detergent in the auto dispense reservoir. All other cycles are running normally. Ordering control.; ordrng 1 WH22X37840 (Control)

"Accelerometer is not functioning properly which is causing unit to fail any type of spin action. I also found an inverter fault code. Brining motor and inverter to have on hand. Once I get the accelerometer issue fixed, Ill test for the inverter issue.; ordrng 1 WH03X33657 (Accelerometer) and 1 WH03X29524 (Motor) and 1 WH22X37840 (Control) and 1 WH22X35837 (Inverter)"

Removed unit from pedestal to access the drain pump. Replaced and retested. Unit is now operating as designed.