"Ran diagnostics. Had f7e5,f7e1, f2e1, f5e2 error codes. Not spinning or agitating, drain backing up. 3 count job. Allow 2 hours. Drain must be cleared before service. ; ordrng 1 W11454734 (Gear case) and 1 W10721967 (Splutch) and 1 WPW10006384 (Belt) and 1 W10528947 (Hub) and 1 W11550891 (Agitator)"

"Ran diagnostics. Had f5e2, f8e1 error codes. Cold valve 2 noisy and hot valve noisy. Replaced hot and dual valve. Cleared error codes. Locks/ unlocks, fills, washes, drains, rinses, dispenses and spins properly at this time. Complete."

Job complete after testing unit found that unit was not agitating properly and making noise. Looked under unit removed cam and found out. It was completely damaged and scraped. Brand new cam tested unit afterwards and everything was working up to spec. ; used 1 W10721967 (Cam) from stock

"Ran diagnostics. Had f3e2, f3e3. Timed dry stuck on, not heating properly, lint chute warped. 2 count job. Allow 1 1/2 hours. Needs service kit per W11395626A, inlet and outlet thermistors, housing. ; ordrng 1 W11417163 (Console/ ACU kit) and 1 W10906551 (Outlet housing) and 1 WP8577274 (Thermistor -outlet) and 1 W11396709 (Thermistor - inlet)"

"Installed new suspension gear box, slider"