WASHER WHIRLPOOL WTW7000DW4 Cx says washer is not draining. F0/E3 F8/E1 F0/E5 cleared codes. Valve is not opening fully. Removed power replaced valve. Calibrated unit. All ops normal. ; used 1 W10758829 (Valve) from stock

DRYER MAYTAG MEDC215EW1 Installed handle and seal. Door opens and closes properly. All ops normal.

WASHER MAYTAG MVWX655DW1 Gear case is grinding during spin cycle wash play is not moving properly there is an oil leak underneath the unit suspensions are bottoming out main control board is not operating is not seeing the door lock; ordrng 1 W10006481 (gearcase) and 1 W10396887 (hub) and 1 W10597177 (actuator) and 1 W10609480 (washplate) and 1 W10682535 (latch) and 1 W10748956 (suspension)

DRYER MAYTAG MEDC215EW1 Handle clip broken off handle. Can’t access dryer drum. Unit needs replacement handle. The temp handle in place. The gasket is tattered also. Replacing. ; ordrng 1 W10714516 (handle) and 1 W10730752 (seal-door)

DRYER ELECTRIC WHIRLPOOL WFW72HEDW0 "Removed power from washer. Replaced main control, pressure switch, and bello. Completed assembly of washer. Powered unit, ran the diagnostics cycle, passed. Unit is operating fully, no leaks. All ops normal."