"3 count job. Allow 2 hours. Replaced gear case, slider, clutch, hub nut, suspension , agitator, screw , lid, hinges, and hinge wires. Ran load size calibration, auto test cycle. Locks/ unlocks, fills, agitates, drains, rinses, dispenses, and spins properly at this time. Complete."

"Ran diagnostics. Had f5e4, f0e3, f2e1 error codes. Found lid cracked at hinge area, hinges weak. agitator loose. Tightened agitator screw. Noisy gear case. 3 count job. Allow 2 hours. ; ordrng 1 W10909670 (Hub nut) and 1 W11256781 (Lid) and 1 W10752187 (Screw) and 1 WP8563965 (Hinge wire LH) and 1 WP8572924 (Hinge wire RH) and 4 W11404293 (Screw)s and 1 W11401116 (Hinge LH) and 1 W11399226 (Hinge RH)"

"Ran diagnostics. Has f2e3 error code. Found gear case holes stripped, broken OR wire to capacitor, capacitor came off gear case. 3 count job. Allow 2 1/2 hours. Small space. ; ordrng 1 W11513246 (Control) and 1 W11481116 (Encoder) and 1 WPW10006384 (Belt) and 1 W11395618 (Capacitor) and 1 W10721967 (Splutch) and 1 W11449840 (Gear case) and 1 W11510461 (Wash plate)"

"Unit not starting, replaced capacitor and tested unit working properly"

Replaced control and sensor tested unit working properly