"JB out 11/1/22. Installed replacement Drive Belt. Tested drive system verified water pump and main drive pulley are being driven by motor. Tested washer is Regular cycle with tub full of water. Verified Agitation, Drain and Spin functions are operating properly JOB COMPLETE"

"JB out 11/1/22. Installed replacement Drive Belt. Tested drive system verified water pump and main drive pulley are being driven by motor. Tested washer is Regular cycle with tub full of water. Verified Agitation, Drain and Spin functions are operating properly JOB COMPLETE"

JB Out 9/2/22. Customer states wash machine will no longer go through Spincycle. Ran diagnostics and extracted only one stored error code F71 indicating Oversuds issue. Advise customer against use of HE turbo as it is to highly concentrated for this low fill high-efficiency washing machine. ran diagnostic routine verified unit will not spin. Found wash plate Bolt loose. Tighten bolt and retested. unit one thats been due to bearing failure. Customer has decided to purchase a new washing machine no repair made. Reference number is 4564001080. Now paid in full job complete

JB out 8/27/22. Inspected unit and found heater with brass colored bushings. Installed replacement heater W11537778. Reinstalled unit into cabinet installation. Tested operation with customer. Verified no leaks. No charge to customer. JOB COMPLETE

NOTE This call was rescheduled from 8/24/22. Part was sent back on that date. JB out 8/26/22. Customer states unit makes no ice at all. Upon arrival verified some ice production. Removed one ice cube jammed in icemaker ejector break. Cycled icemaker verified harvest cycle and water fill functions. Unit is operating as designed. Suggest customer remove the toe panel grill and vacuum condenser coils every two months for the life of the product to maintain high energy efficiency stabbers by design. No parts used. No charge to customer. Job complete