"After a fresh installation of a washer pump full assembly, a functional testing was conducted successfully."

"Visual and physical inspection plus a functional test was conducted and unit Otis presetting the following symptoms, long fill, very long draining cycle, plus through diagnostics found an F8 E1 error that references long fill. The following is recommended for replacement. Drain pump, pressure sensor, and water valves.; ordrng 1 W11125159 (Pressure sensor) and 1 W11036930 (Double water inlet) and 1 W11036928 (Water inlet single) and 1 W11319789 (Drain pump)"

"Visual and physical inspection plus a functional testing were conducted, also ran diagnostics and found no errors. I found a unit that even when everything is apparently working fine, the burner quits prematurely, plus the air duct is presenting some burnt spots on the grill. I am recommending a radiant, gas coils, igniter, and air duct for replacement. ; ordrng 1 W11129538 (Air Duct) and 1 279834 (Gas coil) and 1 279311 (Igniter) and 1 WP338906 (Flame Sensor)"

Visual and physical inspection plus a functional testing was conducted and found a wash pump that is not longer turning and a dispenser that does not open. Both components are recommended for replacement.; ordrng 1 W11025157 (Wash pump complete) and 1 W11705150 (Dispenser)

Matt SR 7738936471; ordrng 1 W11613479 (Wash pump complete)