"Upon arrival customer stated the unit is making aloud noise. Check the unit and found a piece of clothing on the pulley of the motor causing the noise. Remove the block, inform the customer they need new belt. Replace the new belt on the unit. Retested unit and unit is working properly. Job complete.; used 1 W11239857 (Belt) from stock"

"Upon found unit with user interface no working properly, check the unit and half on the ui is working on the left side, but the right side any buttons work. This unit will need new Ui. ; ordrng 1 W11478525 (UI)"

"Upon arrival found unit with error code F9E1 and F7E1, this about no draining and single motor speed failure. Check the unit and found a restriction on the air gap for the F9E1. Run the unit through test cycle and unit doesnt run the motor on firs speed. Replace the pump motor and remove the block from the air gap. Retest the unit and now unit is working properly. Job complete"

"Upon arrival found unit with adjusters broken on the upper rack, replaced the adjusters on the unit. Retest the rack and now is working properly. Job complete"

"Upon arrival found unit keep going up, when the door is closed, check the unit and found a bad star switch. This unit will need new star switch. ; ordrng 1 WC21X20255 (Start switch)"