Customer states the fault comes late in the cycle. UI key test passes. The faucet button does not work. There is 30 ohms at the switch when Depressed. There is no info on the tech sheet to check against. Water comes from the faucet at one point during the service test.; ordrng 1 W11174419 (Switch) and 1 W11624943 (Control)

The center mullion is sweating. There is 14vdc at the door harness and 24 ohms of resistance at that harness. The evaporator fan pulses sporadically.; ordrng 1 WR49X40247 (Evaporator cover assembly) and 1 WR55X40448 (Control.)

"NO COOL ISSUE. PRIOR WORK COMPRESSOR REPLACEMENT. opening the doors can smell freien in the cabinet. Dumped the charge and filled with nitrogen. The filter drier has a brown substance dripping out. ORDERED COMPRESSOR, AND BOTH EVAP COILS. ; ordrng 1 W11598434 (Evap coils FF) and 1 W11578026 (Evap coil) and 1 W11578205 (Compressor)"

Checked for faults and ran a service cycle. Unit has no stored fault codes and passed the service test. Noted the slider was noisy. Replaced slider and calibrated unit. Unit operating as designed.

"Checked for faults 0-3(overload) 7-6( motor CKT open)7-1(tach missing/wrong signal) 7-7(target RPM) and ran a service test. Actuator never moved to agitate. Replaced actuator, calibrated unit and tested. Unit operating as designed.; used 1 W10913953 (Actuator) from stock"