Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.

Local Reviews
for Squaw Valley, CA

Appliance Repair Specialist Rated 5.0 out of 5 stars based on 4 customer reviews

Map of Squaw Valley, CA

Great




Review of Appliance Repair Specialist

Very respectful and responseable took care to explain what he did and saw left his card if I should need to contact him everything is working real well now


Response from Appliance Repair Specialist:

Thank you so much for taking the time to provide feedback. We greatly appreciate it and are glad you had a pleasant experience with ___. Hope to work with you in the future!


Map of Squaw Valley, CA

Merrie




Review of Appliance Repair Specialist

Great service excellent


Response from Appliance Repair Specialist:

Thank you for the awesome rating! We strive to provide excellent and exceptional service at Appliance Repair! We appreciate your time and business.


Map of Squaw Valley, CA

Great service




Review of Appliance Repair Specialist


Response from Appliance Repair Specialist:

We are excited to hear that you had a wonderful experience with our company! We are glad to know your appliance is up and running, thank you very much for your time and business.


Map of Squaw Valley, CA

Great service




Review of Appliance Repair Specialist

Very professional


Response from Appliance Repair Specialist:

Thank you for the great review we are so glad you had awesome service! We really appreciate the feedback for it helps us to continue giving superior service! Thank you for your time and business.


Timothy J.

Timothy J.

DRYER ELECTRIC MAYTAG MVWX500XW2 Installed parts. Tested unit. Unit checks ok.

Near Sunflower Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

DISHWASHER MAYTAG MDB9959SKZ0 Replaced vent assembly and drain pump. Found old drain pump damaged.

Near Baldpate Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

WASHER MAYTAG MVWX500XW2 "Checked for faults and ran a service cycle. 7-6(motor fault). Capacitor has broken off the gearcase and was damaged by the pulley. Unit needs a harness, splutch asb. and a capacitor.; ordrng 1 W10721967 (drive pulley) and 1 W11395618 (CAPACITOR) and 1 WPW10006384 (drive belt) and 1 WPW10383573 (harns-wire)"

Near Sunflower Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

WASHER WHIRLPOOL WFW5090JW "Unit showing an F24(overflow failure), unit will only drain. Let unit drain until it stopped. Removed dryer to access the washer underneath . Checked for faults and ran a service test. Replaced the pressure switch. Unit still draining on start up. Tilted unit back and checked the drain pumps coin trap. Found thick foam inside. Cleared and ran a service test. Unit passed. Called WPTS (7728948046) and was told foam can cause this fault and to advise the customer to run a clean cycle and to use less detergent."

Near Sumac Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

DISHWASHER MAYTAG MDB9959SKZ0 "F9E1(no drain) , FAE2(vent wax motor fault). Unit needs a new control, vent assembly and drain pump.; ordrng 1 W11344507 (HARNESS) and 1 W11410063 (CONT) and 1 W11412663 (DRAIN PUMP) and 1 W11414073 (VENT ASB)"

Near Baldpate Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

DRYER MAYTAG MEDB765FW0 Inspected unit and found the support wheels and idler pulley are full of lint and hair. Cleaned unit and replaced the dryer repair kit. This includes all the support wheels an new idler pulley and belt. Tested unit. Unit checks ok.; used 1 4392067 (DRYER REPAIR KIT) from stock

Near S Hills Valley Rd, Squaw Valley, CA 93675
Timothy J.

Timothy J.

DRYER WHIRLPOOL WGT4027HW0 Only getting 38vac to the igniter. There is 120 vac from line to ground. Found inconsistencies in voltage to the igniter. Replaced timer unit worked for several cycles then stopped. Replaced flame sensor because I am finding it open occasionally when testing with the unit off.

Near E Kings Canyon Rd, Squaw Valley, CA 93675
Jonathan  C.

Jonathan C.

DRYER WHIRLPOOL WGD5540S Tested found ignitor bad and radiant sensor bad replaced both tested working to spec ; used 1 279311 (IGNITOR KIT & BRACKE) from stock

Near Willowood Ln, Squaw Valley, CA 93675
Jonathan  C.

Jonathan C.

DRYER WHIRLPOOL WGT4027HW0 Found coils not opening and timer not moving needs timer and coils; ordrng 1 694539 (secondary coil) and 1 694540 (main coil) and 1 W10854240 (timer)

Near E Kings Canyon Rd, Squaw Valley, CA 93675
Frank P.

Frank P.

N/A WHIRLPOOL WGD5540S Customer stated not heating performed diagnostics Installed partsIgniter Thermostat Thermal fuseStill not heating, spoke too - TJExplained situation - no heat and no glowWhat’s needed - Radiant sensor and or hi limit switchSR# 7728221642Will order part ; Radiant sensor and hi limit switches

Near Willowood Ln, Squaw Valley, CA 93675
Frank P.

Frank P.

DRYER WHIRLPOOL WGD5540S20 Please reschedule Found part defective In boxIgniter is broken; ordrng 1 279311 (ignitor kit & bracke)

Near Willowood Ln, Squaw Valley, CA 93675
Frank P.

Frank P.

DRYER WHIRLPOOL WGD5540S20 Customer stated not heating Performed diagnostics Found igniter Installed and found high limit switch is fAuty And on/off switch needs replacingAnd fuses are not not showing no voltage now; ordrng 1 WP3387134 (thrmst-fix) and 1 WP3392519 (thermal fuse) and 1 WP3398095 (push to start switch)

Near Willowood Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

REFRIGERATOR KITCHENAID KRFC300ESS01 Unit has a broken filter cover and kick plate. IM is working ok and the flow through the dispenser looks good. FC temp is 5f.; ordrng 1 WP12568001 (cover- fil) and 1 WPW10534155 (toe grille (blk))

Near Burk Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

REFRIGERATOR WHIRLPOOL WRF555SDFZ07 Inspected unit and found the top retainer for the mullion has popped off. Checked mullion and LH door for damage. None noted. Reset mullion and tested. Door closing correctly.

Near Pebble Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

REFRIGERATOR WHIRLPOOL WRS325SDHZ00 "Inspected unit and found there is minimal frost pattern on the evaporator and the compressor is only pulling about .5 amps. This would indicate either a leak in the sealed system or a weak compressor. In order to determine this a UV filter dryer must be installed the unit must be depleted of refrigerant , put in a vacuum and then recharged. Sealed system work will be needed for this which means the drier must be cut out and the Uv dryer soldered back in. After being recharged the unit must be ran to disperse the dye throughout the sealed system to identify a potential leak. If the leak is in a component that can be removed and replaced then there will be additional parts and labor for that. If the leak can not be found it could be inside the cabinet which can not be repaired.Customer will decide how they want to proceed with this call and call us with what they want to do.; ordrng 1 W11179385 (drier-tube)"

Near Puma Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

DRYER WHIRLPOOL WGD4815EW2 Noted unit is not converted to LP gas. I can not find details on conversion in the installation or use and care guide it just says use a qualified technician. Called WPTS and was told that only the dial on the regulator needed to be changed. Read further on the instruction sheet for the parts and it stated the orifice should be a 54. The one installed is larger. Customer is going to have their gas company do the conversion. Found that the gas valves are not opening correctly and the igniter takes a very long time to ignite once the valves were installed. Replaced both.

Near Elwood Rd, Squaw Valley, CA 93675
Timothy J.

Timothy J.

WASHER MAYTAG MVWB835DW4 "Checked for faults and ran a service test.3-2(inlet water temperature fault) 8-1(long fill)7-0(loss of power). Unit needs a new water valve. Installed valve and tested . Informed customer that they need to use cold water washes and cold selections if they try something else. Informed them they should put some sort of filter inline to the valves to prevent clogging. Unit is outside, uncovered ,and only connected to cold water to both valves from a hose."

Near Antelope Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

REFRIGERATOR MAYTAG MFW2055FRZ00 Installed parts. Unit checks ok.

Near Simon Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

WASHER MAYTAG MVWB865GW0 "Checked for faults and ran a service test. Unit has no faults and passed the service test. Found coins in the basket and socks and miscellaneous items under the washer. Removed these, filled unit with water and ran an agitate cycle. Unit sounds good. Informed customer of what I found and that I can only make one customer instruct claim. Instructed customer eto keep items like coins out of the basket and to check regularly for items under the tub since this can damage the unit."

Near Quail Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

REFRIGERATOR MAYTAG MFW2055FRZ00 The RH door has a a broken lower hinge receivers and is not sealing. The IM is broken and will need to be replaced for it to work right. The door air leak is causing defrost problems. ; rqstng P&A on 1 4317943 (icemaker only) and 1 LW10858417 (dor-fip) and 1 WPW10397055 (bracket)

Near Simon Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

WASHER CROSLEY VAW3584GW1 Checked for faults and ran a service test. Found a 8-1(lol no flow)code. Cleared cold water valve and tested. Unit operating as designed.

Near George Smith Rd, Squaw Valley, CA 93675
Timothy J.

Timothy J.

WASHER MAYTAG MVWB835DW4 "Unit showing a 3-2(inlet temp fault) 7-5(shifter fault),7-9(locked rotor),7-8(motor stator over-temp) The unit is currently outside (Tarped.With a hose for a water supply. Found a piece of shipping material was causing motor fault codes. Removed piece and tested. Unit checks ok."

Near Antelope Ln, Squaw Valley, CA 93675
Timothy J.

Timothy J.

REFRIGERATOR WHIRLPOOL WRS588FIHV00 IM fill tube frozen. Unit needs a new door. ARS will have to send someone with a truck that can make it up a rutted out dirt hill with multi switchback and about a 30-40 degree grade. My personal vehicle is now stuck on that road.; rqstng P&A on 1 LW11038917 (dor-fip) and 1 W10605341 (WIRE ASSEMBLY)

Near Ruth Hill Rd, Squaw Valley, CA 93675
Jonathan  C.

Jonathan C.

FREEZER WHIRLPOOL WRS321SDHZ01 Tested heater it works replaced display per tech tested

Near George Smith Rd, Squaw Valley, CA 93675
Jonathan  C.

Jonathan C.

FREEZER WHIRLPOOL WRS321SDHZ01 This is the next step in the repair ; ordrng 1 W11214887 (cntrl-elec) and 1 WPW10495967 (heater)

Near George Smith Rd, Squaw Valley, CA 93675
Timothy J.

Timothy J.

WHIRLPOOL WASHER WTW4800XQ2 Inspected unit and found the following codes. 7-7(motor not able to reach target RPM), 7-1(basket speed sensor fault). Ran a service test. Unit passed without fault. Checked the actuator and found it operating as designed. Ran unit on spin and found it performing normally. Unit is connected to a grounded polarized outlet (118vac). Called WPTS and spoke with them. They asked me a few questions and had me do a few tests. They feel it is probably usage either the particular load or the amount of detergent used. (This unit is not an ‘he’ unit) Ran the unit on a medium wash level cool normal wash.

Near Longview Rd, Squaw Valley, CA 93675
Timothy J.

Timothy J.

WHIRLPOOL WASHER WTW5700SW0 Installed lid switch. Tested unit. Unit checks ok

Near Squaw Valley Rd, Squaw Valley, CA 93675
Randy C.

Randy C.

maytag washer MVWC416FW, washer cycle will not start. pre ordered a w11125011 (control) Checked unit for faults, none stored. Ran a service cycle unit passes without fault. Customer was using a normal cycle with the deep water selected. Explained to customer the unit will default to sensor fill when in normal mode. Explained different cycles to customer so they can get better performance from the unit.

Near Bobcat Ln, Squaw Valley, CA 93675