Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.


Local Reviews
for San Joaquin, CA

Appliance Repair Specialist Rated 5.0 out of 5 stars based on 2 customer reviews

Map of San Joaquin, CA

Great service




Review of Appliance Repair Specialist

We received good service, a pleasure to talk to and very courteous.


Response from Appliance Repair Specialist:

Hello Luz, We are excited to hear that you had a wonderful experience with our company! We are glad to know your appliance is up and running, thanks for your time and business


Map of San Joaquin, CA

Washer fixed




Review of Appliance Repair Specialist

Irvin was very quick to diagnose the problem, He had the part in his truck and the washer was fixed.


Response from Appliance Repair Specialist:

Hello Jesus, Thank you for your business and positive review. We are happy to hear you had a great experience with our company and we look forward to working with you in the future.


Irvin F.

Irvin F.

WASHER WHIRLPOOL WTW4816FW2 "Cx says no water enters the unit, not enough. Says the washer won’t complete cycles. On arrival cx has a single blanket set to wash. The unit was unplugged. Removed the wet blanket. Checked errors, found one. F8/E1-LONG FILL Removed the hoses and purged the lines. The water has a brown haze then cleared. The valve screens have a mushy substance in them. Removed the screens cleaned out all gunk and sediment. Purged lines. Installed hoses and test fill. Good. The unit has weak suspension rods. Causing off balance and banging. Replaced suspension. Completed assembly of unit ran calibration. Unit is operational and ready for service."

Near Colorado Rd, San Joaquin, CA 93660
Irvin F.

Irvin F.

WASHER WHIRLPOOL WTW4616FW2 "F8/E1-LONG FILL NO FILL. ELECTRICAL CHECKS, valves and components operating. Cx instruct deep water and normal regular won’t work together. Use heavy for deep water wash."

Near S Colusa Ave, San Joaquin, CA 93660
Irvin F.

Irvin F.

REFRIGERATOR FRIGIDAIRE FFHT1814TW

Near California Ave, San Joaquin, CA 93660
Irvin F.

Irvin F.

RANGE WHIRLPOOL WFG320M0BS3

Near 5th St, San Joaquin, CA 93660
Irvin F.

Irvin F.

WASHER WHIRLPOOL WTW5000DW1 "Removed tub installed replacement. Completed install of components. Ran test on units components, passed. Calibrated unit, all ops normal."

Near Railroad St, San Joaquin, CA 93660
Irvin F.

Irvin F.

WASHER WHIRLPOOL WTW5000DW1 Need more parts. ; ordrng 1 W10752719 (basket) and 6 WP8533953 (screw)s

Near Railroad St, San Joaquin, CA 93660
Irvin F.

Irvin F.

RANGE WHIRLPOOL WFG320M0BS3 "The door separated from adhesive, causing crackling noise. Replaced front cover. The door is operational, there is a gap at top of door CX is aware."

Near 5th St, San Joaquin, CA 93660
Irvin F.

Irvin F.

WASHER WHIRLPOOL WTW5000DW1 "Wet after spin, noisy, put unit into test mode, after error codes. Locked door set to agitate, after 3 minutes didn’t agitate. ; ordrng 1 W10528947 (drive hub kit) and 1 W10721967 (drive pulley) and 1 W10752283 (washplate) and 1 W10913953 (actuator) and 1 W11035751 (gearcase) and 1 W11116590 (cntrl-elec) and 1 W11130362 (SUSPENSION)"

Near Railroad St, San Joaquin, CA 93660
Irvin F.

Irvin F.

DRYER ELECTRIC MAYTAG MVWX655DW0 "During tear down ran into more issues. The washplate metal center piece is stuck onto the gearcase shaft. WD40 and various attempts failed. There is rust in causing the issue. In order to complete this job need outer and inner tubs; ordrng 1 W10512161 (tub assembly) and 1 W10752719 (basket)"

Near Annabella Ave, San Joaquin, CA 93660
Irvin F.

Irvin F.

WASHER HOT POINT HTW200ASK0WW "Replaced belt. Powered unit. Ran components test, spins and agitates. All ops normal."

Near First St, San Joaquin, CA 93660
Irvin F.

Irvin F.

WASHER MAYTAG MVWX655DW0 Sen/ rinse done.The hub is worn. The splines from the wash plate are locked. The gearcase shaft is moving up and down need new gear case. Oil is under the unit. ; ordrng 1 W10721967 (drive pulley) and 1 W11035751 (gearcase) and 1 WPW10006384 (drive belt)

Near Annabella Ave, San Joaquin, CA 93660
Irvin F.

Irvin F.

WASHER WHIRLPOOL WTW4816FW2 "The washer is not filling with cold water. Found the solinoid is not opening fully. Removed hose from valve, the water supply is good. Hot and cold. Installed replacement valve. Ran test passed. All ops normal."

Near Colorado Rd, San Joaquin, CA 93660
Irvin F.

Irvin F.

WASHER HOT POINT HTW200ASK0WW "The washer has a broken belt. Need to replace. The pulley is in poor shape, replacing also. ; ordrng 1 WH01X24697 (BELT) and 1 WH49X25379 (PULLEY)"

Near First St, San Joaquin, CA 93660
Irvin F.

Irvin F.

WASHER WHIRLPOOL WTW5000DW1 "Installed components. Assembled unit.owered, Ray test and calibration. All ops normal."

Near San Joaquin, CA 93660
Irvin F.

Irvin F.

WASHER WHIRLPOOL WTW5000DW1 "Main control fault, speed basket fault, motor fault. Checked the motor found open winding in agitation. Unit needs replacement motor. ; ordrng 1 W11158831 (CAPACITOR) and 1 W11283592 (MOTOR)"

Near San Joaquin, CA 93660
Irvin F.

Irvin F.

DRYER ELECTRIC MAYTAG MVWX655DW0 Removed power installed replacement components. Powered unit calibrated passed. All ops normal.

Near Annabella Ave, San Joaquin, CA 93660
Irvin F.

Irvin F.

WASHER WHIRLPOOL WTW5000DW1 "CX says unit is not washing. Error codes found is LID SWITCH FAULT. Test component, switch, failed ohms test. Replaced lock. During test wash plate failed to move properly installed hub and wash plate. Test component, and calibrated unit passed. All ops normal. ; used 1 W10838613 (LATCH), and 1 W10902814 (WASH PLATE) from stock"

Near Oregon Ave, San Joaquin, CA 93660
Irvin F.

Irvin F.

WASHER ADMIRAL ATW4675YQ1 "Tub assembly bounces widely in machine. Causing noise and function issues. Removed power from unit. Replaced suspension assembly. Completed unit assembly. Powered unit test components, each operated properly. All ops normal."

Near Annabella Ave, San Joaquin, CA 93660
Irvin F.

Irvin F.

DRYER WHIRLPOOL WED5000DW2 Replaced handle. All ops normal.

Near Oregon Ave, San Joaquin, CA 93660
Irvin F.

Irvin F.

DRYER WHIRLPOOL WED5000DW2 "S225EQ-unit will not start confirmed. Found failed thermal cut-off. Installed replacement component test pAssed unit is operating with heat. The unit still needs the handle ; ordrng 1 W10861225 (handle), used 1 W11050897 (CUTOFF-TML) from stock"

Near Oregon Ave, San Joaquin, CA 93660
Irvin F.

Irvin F.

REFIRGERATOR FRIGIDAIRE FFHT1814TW0 "Unit is not cooling. The evap motor is not running. The control is not allowing unit to be turned off. Removed power, installed thermistor fan motor and control, with fan blade. Assembled the unit powered. Observed cycling to run of unit, passed. All operations normal."

Near Railroad St, San Joaquin, CA 93660
Irvin F.

Irvin F.

WASHER MAYTAG MVWX655DW0 Cx states there is a noise in spin. Checked unit for errors found one code; off balance. tested unit, all components all operating. During spin the unit is noisy and bouncy replacing suspension. The hub and wash plates are slipping replaced. Ordering suspension. ; ordrng 1 W11130362 (SUSPENSION)

Near Annabella Ave, San Joaquin, CA 93660
Irvin F.

Irvin F.

maytag dryer MVWX655DW0 the washer has weak suspension, bottoms out in push test. removed failed suspension, installed replacement W11130362 (Suspension). calibration passed. all ops normal. ; Job Completed.

Near Annabella Ave, San Joaquin, CA 93660
Irvin F.

Irvin F.

maytag dryer MVWX655DW0 the washer has weak suspension, bottoms out in push test. removed failed suspension, installed replacement W11130362 (Suspension). calibration passed. all ops normal. ; Job Completed.

Near Annabella Ave, San Joaquin, CA 93660
Irvin F.

Irvin F.

MAYTAG WASHER MVWX655DW1 Customer says unit is not draining. Confirmed issue. Attempt to activate the pump buzzing no action. Removed pump the impeller is off the shaft. Replaced pump W10876600 (PUMP-WATER) test operations, passed. Calibrated unit, all ops normal.

Near W Nevada Ave, San Joaquin, CA 93660
Irvin F.

Irvin F.

maytag washer MVWX655DW0 agitator is not operating. Checked error codes no codes. Ran components test, found issue. WORN SPLINES ON WASH PLATE. Replaced hub and agitator. Retest passed. Calibrated unit passed. All ops normal.

Near Annabella Ave, San Joaquin, CA 93660