F0E5 present. Cx states that they havent been able to get the machine to spin without banging around. Unit has been ending cycles early because of the OOB issue and not spinning clothes out completely. I found that the basket was loosely fastened to the transmission causing excessive movement during the spin. I tightened the basket nut and retested. Unit is spinning better now. I also share some tips with cx for getting the best performance. Unit is working as designed.

Installed new parts and verified the bake and broil are functioning.

Found a broken door switch upon arrival. Replaced with truck stock. Issue resolved.; used 1 W11396033 (Switch) from stock

Ice maker is working fine. Could not produce because temperature was too high in fz section. Found door gasket had large air leak at bottom left side. Used heat gun to correct. Cleared frost build up. Everything is working after repair.

Installed new parts and verified the bake cycle is irking as designed.