Unit wont spin. Has heat. Checked and found broken belt. Removed and replaced belt from dryer repair kit. Installed. Now working as designed

JB out 7/1/23. Found unit out (away from wall) upon arrival. Installed replacement control ( User Interface with HV Board)W11533213 And side User Interface (Panel UI) . Reassembled and tested.no charge to customer.JOB COMPLETE

JB out 6/28/23. Customer states washer does not fill or does not fill with enough water. Instruct customer about current model H.E. ( High Efficiency) washing machines that fill with small amounts of water as mandated by the US government. Tested washer in Normal/ Medium cycle. Discover that the HOT water supply faucet was closed. Custer states that HOT water is not used. Opened HOT Faucet and instructed that the onboard computer must detect both Hot and Cold water supply or the wash cycle may be canceled automatically.tested wash cycle again on Tap Cold and found very low volume of water flow. Removed cold water from faucet to verify cold water volume from the faucet is very low. Recommend calling a licensed plumber to correct the cold water flow issue.No charge to customer. JOB COMPLETE

"On arrival Cx states leak through tub seam, used epoxy to repair and seal tub seam. Advised Cx to give unit 24 hours for epoxy to cure before using unit. Unit functions as designed.; used 1 193088 (Epoxy) from stock"

"On arrival unit not going passed wash. Found low flow. Cold water valve clogged with sediment. Cleared and tested, unit functions as designed"