Service History 558

We serviced a

KITCHENAID REFRIGERATOR

Model KRSC503ESS00

Near Manteca, California 95337

Andrew

Job Details: 12/17/2024

W10779331 compressor fault. Customer complaint. Not cooling. Freezer or refrigerator area. Found clicking compressor in the back. Not able to start it. Faulty. ; ordrng 1 W10779331 (Compressor)

We serviced a

SPEED QUEEN DRYER

Model ADGE9RYS118TW01

Near Fillmore, California 93015

Felipe S

Job Details: 12/17/2024

Upon arrival customer stated the unit has a smell of gas on the inside of the drum. Check the unit and is coming from the bottom. Open the lower compartment and check with gas leak detector and found the leak is coming from the coils. This unit will need new burner assembly. Additional recommend the customer no to use the machine in the meantime for safety concerns. ; ordrng 1 D517609 (Burner assembly)

We serviced a

WHIRLPOOL WASHER

Model MVW7232HC0

Near Bakersfield, California 93308

Felipe S

Job Details: 12/17/2024

"Upon arrival found unit with error codes F7E4, F0E5 and F7E9, this about basket re-engagement fault, off balance and rotor lock. Check the unit and found coins between drum and wash plate. Remove coins, retest the unit and found the unit has a problem with gear case. Check the lower compartment and water leak from the gear case, this was causing the gear and slider dont work properly causing only the wash plate move. This unit will need new gear case and components. ; ordrng 1 W11449841 (Gear case) and 1 W10754448 (Clutch) and 1 W10915701 (Rotor) and 1 W10902814 (Wash plate)"

We serviced a

GE REFRIGERATOR

Model PFE29PSDCSS

Near Bakersfield, California 93314

Felipe S

Job Details: 12/17/2024

Upon arrival found unit with warm temperature on the fresh food compartment. Check the unit and found fan is no running and temperature are 50F. Check the unit and found ice clogged the drain on that section. Run the unit on diagnostic. And found all the thermistors are working properly and register correct temperatures. Run the test for the evaporator fresh food compartment fan and no RPMs are register. Fan sound like is struggling to run. This unit will need a new evaporator fan.; ordrng 1 WR24X27948 (Fan)

We serviced a

WHIRLPOOL RANGE

Model WFG505M0MS

Near San Bernardino, California 92404

Francisco

Job Details: 12/17/2024

"Documented with tech line, they advised trying slightly wider racks. As far as the burner they stated is cosmetic to have Cx call wpl for further help Cx service.Rated for 25 lbsWider w10256908Sr#7740553315; ordrng 2 WPW10256908 (Racks)s"

We serviced a

KITCHENAID DISHWASHER

Model KDTE204KPS2

Near Atwater, California 95301

Cruz

Job Details: 12/17/2024

"Need work- no bottom panel, or install ion,brand new unit, ordering part for unit. ; ordrng 1 W11545318 (Panel) and 1 W11573700 (Installation)"

We serviced a

JENN-AIR REFRIGERATOR

Model JS48PPDUDE01

Near Los Angeles, California 91326

Richard

Job Details: 12/17/2024

Upon arrival replaced defective refrigerator door tested unit unit is now working as intended no longer leaking and also dispensing ice job complete

We serviced a

MAYTAG WASHER

Model WFW5605MW1

Near Los Angeles, California 91342

ERICK H

Job Details: 12/17/2024

Replaced acu and Ui. Tested unit. Unit operating as designed. Job complete.

We serviced a

GENERAL ELECTRIC REFRIGERATOR/TOP

Model GSS25GYPJCFS

Near Ojai, California 93023

Kenneth

Job Details: 12/17/2024

Installled funnel and paddle. Tested. Unit is working properly. Customer approves function.

We serviced a

WHIRLPOOL DRYER

Model WED8127LW2

Near Fresno, California 93706

David

Job Details: 12/17/2024

Replaced nozzle and valve tested unit unit working as designed

We serviced a

MAYTAG WASHER

Model MVW4505MW0

Near Avenal, California 93204

Esteban

Job Details: 12/17/2024

"Suspension, harness and drain pump were removed and replaced. Unit passed all test. Unit is working as intended."

We serviced a

WHIRLPOOL WASHER

Model WTW4957PW0

Near Santa Clarita, California 91354

Felipe S

Job Details: 12/17/2024

"Install the new control board on the unit. Retest the unit, on diagnostic and all the test passes without any issues. Now unit is working properly. Job complete"

We serviced a

GENERAL ELECTRIC DRYER - GAS

Model GTD45GASJ3WS

Near Adelanto, California 92301

Cesar

Job Details: 12/17/2024

Replaced all parts listed tested unit by running a sensor dry cycle started test at 12:33 pm by 12:54 timer had advanced a significant amount indicating its working on sensor dry now

We serviced a

HISENSE RANGE

Model HBG3601CPS

Near Bakersfield, California 93309

Aaron

Job Details: 12/17/2024

"Control board that was installed was the wrong one installed the correct control board tested operations unit started heating and calibrated unit at 350°F, operations ok now at this time"

We serviced a

GENERAL ELECTRIC WASHER

Model GTW485ASW0WB

Near Richgrove, California 93261

James

Job Details: 12/17/2024

Installed new control and set personality to board per instructions. Used navy bean to ensure ID written to unit. Used navy bean to test loads. Unit working as intended.

We serviced a

FRIGIDAIRE REFRIGERATOR

Model GRSS2652AF3

Near Avenal, California 93204

Esteban

Job Details: 12/17/2024

Evap fan motor was removed and replaced. Until passed all test. Unit is working as intended.

We serviced a

WHIRLPOOL RANGE

Model WFE535S0LS3

Near Merced, California 95348

Cruz

Job Details: 12/17/2024

"Fixed- installed new part (element) bake, broil, top burners are working fine- cx ok repair"

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FRFG1723AV04

Near Ceres, California 95307

Andrew

Job Details: 12/17/2024

Freezer door damaged. Cx complaint. Upon arrival. Found damaged front freezer door. Dented top area. Installed door. Tested components out okay.

We serviced a

MAYTAG WASHER

Model MVW4505MW1

Near Bakersfield, California 93305

Raymond

Job Details: 12/17/2024

Installed lower harness and tested unit functioning as designed

We serviced a

WHIRLPOOL WASHER

Model WFW8300SW00

Near Fresno, California 93720

Joe P

Job Details: 12/17/2024

"Inspected drive motor connector, found pin 2 neutral had backed out making intermittent connection. Repaired connection, unit is working to manufacture specifications. Job complete."

We serviced a

WHIRLPOOL WASHER

Model WTW8127LC0

Near Ventura, California 93003

Ian Y

Job Details: 12/17/2024

"Removed and replaced units dispenser assembly including valve. Tested, dispenser connection to board no longer shorting entire machine."

We serviced a

KITCHENAID OVEN

Model WOD52ES4MZ

Near Malibu, California 90265

Giovanni M

Job Details: 12/17/2024

Needs 2x labor for the unit soak and then reinstall of a build in unit. Replaced both control and UI. Then reinstalled unit. Tested unit after. Everything is working as designed at this time.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS315SDHZ05

Near Fresno, California 93727

Timothy

Job Details: 12/17/2024

Installed thermistor and control

We serviced a

WHIRLPOOL REFRGERATOR

Model WRS555SIHZ06

Near Paso Robles, California 93446

Jack

Job Details: 12/17/2024

Replaced all parts listed. Fan motor chute thermistor ice bin and heater. Unit was defrosted and unit should be up and cold 12 to 24 hours. Its been unplugged. Better to replace parts. Fan and heater are now working. Mother for dispensing ice is now working again. Job completed

We serviced a

WHIRLPOOL DRYER

Model WED7120HW2

Near Salida, California 95368

Martin

Job Details: 12/17/2024

Replaced bad ui tested unit panel led screen is on and dryer is heating and tumbling per design job complete

We serviced a

MAYTAGAG DRYER

Model MED5500FW2

Near Kingsburg, California 93631

Joe P

Job Details: 12/17/2024

"Dryer is not bolted down to pedestal ! Removed bulkhead, cleaned lint out of vent duct and blower wheel. Tested unit working to manufacture specifications. Job complete."

We serviced a

WHIRLPOOL KITCHEN

Model WDT750SAKZ2

Near Palmdale, California 93552

Samson

Job Details: 12/17/2024

"Replaced bad hinges, both left and right. Unit test ok. Complete"

We serviced a

MAYTAG WASHER

Model MVW7232HW1

Near Santa Ynez, California 93460

Kash S

Job Details: 12/17/2024

"Replaced suspension, verified unit is spinning properly, tech noted noise coming from under the unit, cannot verify where noise is, noise is not hindering spin or functionality of unit, cx has no further questions/concerns, unit is fully operational at this time"

We serviced a

GENERAL ELECTRIC DISHWASHER

Model GDF510PSR6SS

Near Madera, California 93636

David

Job Details: 12/17/2024

Replaced control board tested unit unit working as designed

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS555SIHZ06

Near Madera, California 93636

David

Job Details: 12/17/2024

Replaced auger motor and replaced filter housing tested unit unit working as designed

We serviced a

FRIGIDAIRE REFRIGERATOR

Model LFSS2612TE2

Near Bakersfield, California 93313

James

Job Details: 12/17/2024

Installed new control and cover. Unit complete

We serviced a

WHIRLPOOL DRYER - ELECTRIC

Model WTW7300DW0

Near Redlands, California 92373

Rod

Job Details: 12/17/2024

Not a related issue to previous workNo water entering product Confirmedloose water valve connections..reconnected designed operation was restoredwith no leaks.

We serviced a

MAYTAG DISHWASHER

Model MDB8959SKZ0

Near Yucaipa, California 92399

Rod

Job Details: 12/17/2024

Confirmedlatch misaligned switch assembly.adjusted and as designed operation was restored.

We serviced a

WHIRLPOOL WASHER

Model WTW5010LW0

Near Camarillo, California 93012

Ian Y

Job Details: 12/17/2024

Removed and replaced units control and harness. Tested in automatic diagnostic test mode. Unit now going into cycles and passed test without coding out.

We serviced a

AMANA WASHER

Model NTW4516FW3

Near Santa Ynez, California 93460

Kash S

Job Details: 12/17/2024

"Replaced Gearcase and suspension, verified with cx unit is spinning freely without excessive noise, cx has no further questions/concerns, unit is fully operational at this time"

We serviced a

WHIRLPOOL WASHER

Model WTW7120HW0

Near Santa Maria, California 93454

George

Job Details: 12/17/2024

Installed parts tested on a fill wash and drain ok complete.

We serviced a

GE RANGE

Model CGS990SET1SS

Near Bakersfield, California 93312

Brandon

Job Details: 12/17/2024

Replaced Ignitor. Unit is working again.

We serviced a

WHIRLPOOL COOKTOP

Model WCG55US6HS00

Near Tranquillity, California 93668

David

Job Details: 12/17/2024

Replaced spark module tested unit unit working as designed

We serviced a

KITCHENAID DISHWASHER

Model KDTM405PPS1

Near Riverside, California 92507

Robert U.

Job Details: 12/17/2024

After replacing the strike the unit is now able to sense the door as closed and it is able to continue with the cycle. I ran a diagnostic cycle and all functions tested ok. The strike was just missing from the factory. Job completed all functions restored.

We serviced a

WHIRLPOOL OVEN

Model WOC54EC0HS20

Near Lathrop, California 95330

William

Job Details: 12/17/2024

"Sr #7740556587, checked all voltage blower motor power & signals, replaced blower motor & ACU brd, reseated all connections from blower Hall effect sensor to main control brd, ran test bake cycle, unit operating as designed. W11256622, signal harness, W11245665 main harness."

We serviced a

MAYTAG WASEHR

Model MVW4505MW1

Near Agoura Hills, California 91301

Richard

Job Details: 12/17/2024

"Upon arrival, replaced broken, wire, harness and faulty lid latch tested unit unit passed all tests and is now working as intended. Reprogrammed control board and ran factory calibration job complete"

We serviced a

MAYTAG WASHER

Model MVWC565FW1

Near Covina, California 91723

Stephen

Job Details: 12/17/2024

"Replaced suspension kit and belt. Ran calibration. Fills, agitates, drains,, spins properly at this time. Complete."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS321SDHZ08

Near Oxnard, California 93033

Kenneth

Job Details: 12/17/2024

Installed heater and tested unit. Unit is working properly. Customer approves function at this time.

We serviced a

MAYTAG DRYER

Model MGDX600XW0

Near Lemoore, California 93245

Enrique

Job Details: 12/17/2024

"Installed dryer repair kit, 2 retainers and igniter. Dryer operating as designed."

We serviced a

MAYTAG WASHER

Model MVWC565FW2

Near Oxnard, California 93033

Isidro

Job Details: 12/17/2024

"Installed new Gearcase, cam kit, hub and belt. Calibrated unit ran diagnostics unit is now agitating and spinning properly as designed at this time of service ; used 1 W11239857 (Belt) from stock"

We serviced a

MAYTAG DRYER

Model MED4500MW0

Near Manteca, California 95337

Andrew

Job Details: 12/17/2024

Recall timer. Ran diagnostics. Found damaged front faulty timer. Installed new timer and knob. Tested components out okay. Operating according to protocol designed

We serviced a

MAYTAG WASHER

Model MVW4505MW1

Near Bakersfield, California 93312

Chase

Job Details: 12/17/2024

Installed new harness and pump. All ops now working as designed.

We serviced a

MAYTAG WASHER

Model MVW7230HW1

Near Oak Park, California 91377

Richard

Job Details: 12/17/2024

"Put arrival found repaired wire harness had come apart. Replaced wire, harness re-tested unit unit is draining and working as intended. Cleared all error codes. Also ran factory calibration on unit job complete."

We serviced a

AMANA REFRIGERATOR

Model BC20NL

Near Lancaster, California 93536

Samson

Job Details: 12/17/2024

"Replaced bad Evap fan, unit test ok. Complete"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS588FIHZ04

Near Oak Park, California 91377

Richard

Job Details: 12/17/2024

Upon arrival inspected unit replaced leaking filter housing and water tube reset for filter. Unit is no longer leaking in dispensing water and ice as intended. Job complete

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FFTR1814WWD

Near Bakersfield, California 93305

James

Job Details: 12/17/2024

Installed new gaskets and unit is working as intended.

We serviced a

KITCHENAID REFRIGERATOR

Model KBSD702MPS00

Near Los Angeles, California 91311

Sean W

Job Details: 12/17/2024

"Icemaker cracked and leaking water into ice bin,replaced Icemaker,no longer leaking and fridge working properly."

We serviced a

WHIRLLPOOL REFRIGERATOR

Model WRF757SDHZ04

Near Turlock, California 95382

Cruz

Job Details: 12/17/2024

Fixed- installed new parts (2 cntrl elec) set temperature- cooling and temperature are working fine- cx ok repair

We serviced a

GENERAL ELECTRIC WASHER

Model GTW465ASN9WW

Near Stratford, California 93266

Enrique

Job Details: 12/17/2024

"Installed speed sensor, tested all components. Washer operating as designed. No leaks."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF555SDFZ09

Near Los Angeles, California 91342

ERICK H

Job Details: 12/17/2024

Replaced frame. Unit operating as designed. Job complete.

We serviced a

WHIRLPOOL RANGE

Model WFG535S0LS4

Near Palmdale, California 93550

Samson

Job Details: 12/17/2024

Replaced all knobs due to being broken. Cx said unit not making any noise that unit works good for her. Complete

We serviced a

MAYTAG WASHER

Model MVW6230HW3

Near Modesto, California 95358

Timothy G

Job Details: 12/17/2024

Replaced failed lower harness. Wires were burnt off at pump plug. Recalibrated unit and found unit working per design. Job complete. This was separate issue with unit. Please pay diagnostic and labor.

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FFTR2045VS7

Near Tracy, California 95304

William

Job Details: 12/17/2024

"Replaced compressor, checked for sealed system leaks, recharged, unit cooling at this time"

We serviced a

WHIRLPOOL WASHER

Model CAE2745FQ1

Near Los Angeles, California 91605

Tim B

Job Details: 12/17/2024

Replaced water valve and whe I turned water on the cold side is leaking from the fitting at the wall and will need to be replaced. Tested Inlet and valve and unit functions as normal.

We serviced a

KITCHENAID DISHWASHER

Model KDPM604KPS2

Near Los Angeles, California 91364

Giovanni M

Job Details: 12/17/2024

CX let me know that the unit didnt have any power. upon diagnosis I found the unit to wire harness to be installed incorrectly. I uninstall and then reinstalled properly. Then tested unit after for leaks and function. Everything is working as designed at this time.

We serviced a

MAYTAG WASHER

Model MVW7230HW0

Near Manteca, California 95337

Andrew

Job Details: 12/17/2024

C cx complaint wASHING MACHINE IS NOT FINISHING THE WASHING CYCLE AND IT STOPS MID CYCLE ERROR F9E1. Upon arrival. Ran diagnostics. Slider installed. Tested components out okay. Operating according to protocol designed.

We serviced a

MAYTAG DISHWASHER

Model MDB8959SKB0

Near Manteca, California 95337

William

Job Details: 12/17/2024

"Replaced upper manifold assy, ui housing & keypad, ran self diagnostic cycle, unit operating as designed."

We serviced a

JENN AIR REFRIGERATOR

Model JBSFS42NMX00

Near Los Angeles, California 90046

Rich

Job Details: 12/17/2024

Installed panel and brackets. Operating as designed.

We serviced a

WHIRLPOOL WASHER

Model WTW5105HC3

Near Turlock, California 95382

Cruz

Job Details: 12/17/2024

Fixed- found bearings to drain pump are worn out causing a loud grinding noise- removed bad one and then installed new (pump) provided by the warranty- calibration test pass- auto test pass- no leaks- no errors- cx ok re

We serviced a

MAYTAG DRYER

Model MGD8630HC3

Near Bakersfield, California 93311

Aaron

Job Details: 12/17/2024

"*Checked operations unit is misfiring replaced, Needs gas coils tested, replaced the coils tested operations ok now at this time ; used 1 279834 (2 COIL GAS VALVE SET) from stock"

We serviced a

WHIRLPOOL OVEN

Model WFG505M0BS0

Near Oceano, California 93445

George

Job Details: 12/17/2024

Found stove Handel broken replaced Handel and screw tested ok complete.

We serviced a

KITCHENAID MICROWAVE

Model KMBP100ESS01

Near Bakersfield, California 93308

Felipe S

Job Details: 12/17/2024

"Upon arrival found unit no heating up, and stopping the cycle after 3 seconds to begin. Check the unit and not found any error codes. This unit has a bad inverter. Replace the inverter on the unit. Retest the unit and now is working properly. Job complete"

We serviced a

KITCHEN AID DISHWASHER

Model KDTE204KPS1

Near Clovis, California 93612

Timothy

Job Details: 12/17/2024

9-1(not draining) found a pice of glass in the drain pump. Removed object and tested. Unit checks ok. No leaks noted.

We serviced a

KITCHENAID OVEN

Model KFGG500ESS7

Near Modesto, California 95350

Martin

Job Details: 12/17/2024

Found bad igniter and harness Replaced igniter and harness tested unit igniter is working per design job complete

We serviced a

MAYTAG UNV

Model MVW6230HW0

Near Madera, California 93638

David

Job Details: 12/17/2024

Found loose belt replaced belt

We serviced a

MAYTAG WASHER

Model MVW7232HW2

Near Los Angeles, California 90049

Tim B

Job Details: 12/17/2024

Found unit making load banging/skipping noise while in spin. Replaced rotor and slider and retested through diagnostics. Unit functions as normal no sounds.

We serviced a

MAYTAG DRYER

Model MED5630HW2

Near Merced, California 95340

Cruz

Job Details: 12/17/2024

"Fixed- found loose wire at cntrl elec, reseated, tested unit, all test pass in diagnostic- cx ok repair"

We serviced a

THERMADOR DISHWASHER

Model DWHE60CPR-22

Near Bakersfield, California 93309

Brandon

Job Details: 12/17/2024

Unit not draining upon arrival. Drain pump was not connected to power. Corrected and tested. Unit now running as designed.

We serviced a

GENERAL ELECTRIC WASHER

Model GTW485ASW0WB

Near Rosemead, California 91770

Stephen

Job Details: 12/17/2024

"Ran diagnostics. Had fault code 28. Cleared fault code. Options knob not in proper position. Ran tests 10, 14, 15- passed. Belt is working properly. Using too much detergent. Instructed customer to use less detergent. Advised to use deep fill for better wash results. Fills, agitates, drains, rinses, and spins properly at this time. Instructed on unbalanced loads. Unit is working properly as designed. Complete."

We serviced a

MAYTAG WASHER

Model MVWC565FW2

Near Beverly Hills, California 90210

Tim B

Job Details: 12/17/2024

Found a lot of dirt and build up on agitator and outer tub. Ran through full diagnostics and all functions working properly. Showed Cx how to clean unit with affresh.

We serviced a

MAYTAG WASHER

Model MVW7230HW1

Near Bakersfield, California 93312

Aaron

Job Details: 12/17/2024

"Checked operations loose rotor bolt , tighten down , tested with 5 towels , noise its making when agitating when strokes the opposite direction the play in the rotor and slider slaps ever so slightly, the heavier, the load the louder the slap when water is at a minimal advised customer to use maximum water levels and to select cycles with more water to minimize the noise. Other than that, it is quite normal, not going to hurt anything in the machine. Customer instruct"

We serviced a

GENERAL ELECTRIC REFRIGERATOR

Model GNE27JYMTFFS

Near Modesto, California 95351

Cruz

Job Details: 12/17/2024

"Fixed- found loose connection at ff thermistor causing intermittent freezing- reseated, set temperature to recommended settings- dampers, fans, lights, all checked ok with smart hq diagnostic tool-"

We serviced a

WHIRLPOOL DISHWASHER

Model WDT730HAMZ1

Near Bakersfield, California 93313

Raymond

Job Details: 12/17/2024

On arrival unit unresponsive with sporadic keypad operation found corrupt control software replaced and tested control board unit functioning as designed

We serviced a

MAYTAG WASHER

Model MVWB835DW3

Near Los Angeles, California 91604

Oscar

Job Details: 12/17/2024

"Because of a physical damage, a new lid assembly has been replaced"

We serviced a

MAYTAG WASHER

Model MVWB765FW1

Near Perris, California 92570

Kevin

Job Details: 12/17/2024

Console was not responsive for customer. When I arrived I found led lights were out. Removed and replaced console. All tests good.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT311FZDW00

Near Barstow, California 92311

Jonathan B.

Job Details: 12/17/2024

JB OUT 12/17/24.Customer states icemaker is leaking water down into the ice storage bin below. Upon arrival removed existing icemaker and verified Teflon coating has worn out allowing water to leak downward. Installed replacement ice maker part number W11700559. Reassembled unit and tested operation. Unit unit is now operating as designed. No charge to customer. Job complete.

We serviced a

MAYTAG WASHER

Model MVW4505MW2

Near Bakersfield, California 93304

Raymond

Job Details: 12/17/2024

On arrival unit not operating properly tested and found loose connection at drain pump secured connection and tested unit functioning as designed

We serviced a

MAYTAG WASHER

Model MVWB765FW3

Near West Covina, California 91790

Andy

Job Details: 12/17/2024

"Not washing, found slider bad, replaced slider and tested unit working properly"

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FRFS2823AWA

Near Waterford, California 95386

Timothy G

Job Details: 12/17/2024

Inspected freezer drawer for not closing. Fond left slider was bent. Replaced both sliders adjusted and drawer is closing per design. Job completed

We serviced a

GENERAL ELECTRIC WASHER

Model GTW465ASN9WW

Near Oxnard, California 93033

Isidro

Job Details: 12/17/2024

"Installed new clutch unit worked for a bit then started making same noise, called Square Trade tech them know the issue and what we need to resolve problem"

We serviced a

GE WASHER

Model GFW655SPV0DS

Near Coalinga, California 93210

Esteban

Job Details: 12/17/2024

Valve and control. Board were removed and replaced. Unit passed all test. Unit is working as intended.

We serviced a

MAYTAG DRYER

Model Mgd4500mw1

Near Los Angeles, California 91303

Sean W

Job Details: 12/17/2024

"Timer jammed and will not rotate,replaced timer and knob,timer now rotating and dryer working properly."

We serviced a

MAYTAG WASHER

Model MVW6200KW4

Near Lancaster, California 93535

Samson

Job Details: 12/17/2024

"Put unit into diagnostic, and no error or fault code. Check suspension and belt. Motor too, everything checked out fine, the only sound I found during spin, which cx confirmed was the sound she hears is the vibration of drain hose to the back of the unit. I secured with zip ties (picture attached). Unit tested ok now. If cx happens to hear any other strange noise, I advised her to record it. Complete"

We serviced a

AMANA DRYER

Model NGD5800HW2

Near Atascadero, California 93422

Leo

Job Details: 12/17/2024

"Disassembled units front panel in order to replace thermistor and wire harness for moisture sensor, put it back together and tested unit in different settings and it heats up good, unit runs properly,Job complete."

We serviced a

FRIGIDAIRE REFRIGERATOR

Model GRMC2273CD

Near Bakersfield, California 93312

Chase

Job Details: 12/17/2024

"Found a loose wire to the door switch. Reconnected wire. Tested unit, door now closing with no issues. All ops now working as designed."

We serviced a

KITCHENAID REFRIGERATOR

Model KRFC704FPS06

Near Manteca, California 95337

Andrew

Job Details: 12/17/2024

Blau. Cx complaint. Noise complaint. Upon arrival. Cx had the recording. Door left vibration. High speed compressors noise. Connection loose. Tighten fan. connections.

We serviced a

WHIRLPOOL DISHWASHER

Model WDT970SAKZ1

Near Bakersfield, California 93306

Raymond

Job Details: 12/17/2024

On arrival home inspection showed vent leaking at cycle per service pointer chain settings for vent to allow for reduced condensation by following proper procedure. Tested unit functioning as design.

We serviced a

WHIRLPOOL WASHER

Model WTW5105HW0

Near Apple Valley, California 92308

Cesar

Job Details: 12/17/2024

"Found cam getting stuck on gear case shaft causing shifter to fail replaced actuator and cam all tested good at this time ; used 1 W10721967 (Cam), and 1 W10913953 (Actuator) from stock"

We serviced a

MAYTAG WASHER

Model MVW4505MW1

Near San Luis Obispo, California 93405

Leo

Job Details: 12/17/2024

"Entered diagnostics program, no error codes present and proceeded to test unit to check for water leaks, inner drain line from pump clamp was loose, reattached it properly and no more leak, unit runs as designed, Job complete."

We serviced a

KITCHENAID DISHWASHER

Model KDTM404KPS2

Near Bakersfield, California 93314

Chase

Job Details: 12/17/2024

Found water in float switch. Removed water and instructed cx on proper cleaning of unit. All ops working as designed.

We serviced a

WHIRLPOOL WASHER

Model WTW8500DC5

Near Santa Clarita, California 91354

Felipe S

Job Details: 12/17/2024

"Upon arrival found unit with user interface no responding to some options and cycle. Check the unit and found corrosion on the ui, this unit will need new users interface. Inform this to the customer, and they decide not to proceed with repair at this time. Job complete"

We serviced a

WHIRLPOOL DRYER

Model WGD8740DW1

Near San Fernando, California 91340

ERICK H

Job Details: 12/17/2024

Rollers are damaged. Cx has video of sound. Replaced rollers. Tested unit. Unit operating as designed. Job complete.

We serviced a

WHIRLPOOL WASHER

Model WTW5105HW0

Near Riverside, California 92508

Robert U.

Job Details: 12/17/2024

"Found the cam assembly failed again and was warped. Reason for noise and not shifting into gear so to say. The cam assembly is responsible for the shifting from agitation to spin. I took a photo of the old cam and new cam side by side and the left one is warped and the right one is new. All functions restored restored after replacing both parts. Please bill out for the same parts being replaced. Defective part not anything else. Job completed. ; used 1 W11239857 (Belt), and 1 W10721967 (Cam) from stock"

We serviced a

MAYTAG WASHER

Model MVWC565FW2

Near Camarillo, California 93010

Isidro

Job Details: 12/17/2024

"Off balance error code, erased errors installed hub kit, calibrated unit ran diagnostics unit is now spinning as designed at this time of service , I advise cx not to over lead the unit; used 1 W10528947 (Hub) from stock"

We serviced a

WHIRLPOOL MICROWAVE

Model WMH31017HS10

Near Merced, California 95348

Cruz

Job Details: 12/17/2024

"Fixed- found door to be sagging and hitting cntrl panel- I then adjusted both hinges and pushed up on door, no sagging, door not hitting cntrl panel- cx ok repair"