We serviced a
KITCHENAID REFRIGERATOR
Model KRFF507HPS03
Near Bakersfield, CA 93314
Jim
Job Details:
03/25/2025
Replaced left side door
We serviced a
WHIRLPOOL WASHER
Model WTW4955HW3
Near Redlands, CA 92373
Rod
Job Details:
03/25/2025
"SPECIAL PROJECT S153EB COVER PART AND LABOR ONLYOrdered machine control; ordrng 1 W11608056 (Control, machine)"
We serviced a
KITCHENAID DISHWASHER
Model KDTE204KPS3
Near Redlands, CA 92373
Rod
Job Details:
03/25/2025
"Wont continue a cycleConfirmed..control indicates no pump action although drain pump operates.Ordering control; ordrng 1 W11629914 (Control, machine)"
We serviced a
WHIRLPOOL REFRGERATOR
Model WRFS560EHZ03
Near Redlands, CA 92373
Rod
Job Details:
03/25/2025
SR# 7741216846 Matt Wfcc techlineSP# W11667932. W11610345Noise in inside productConfirmed.refrigerant noise..moaning and groaning with no loss of cooling. ; schdld next appmnt for 4/3 THU 1-3
We serviced a
WHIRLPOOL WASHER
Model MVW4505MW1
Near Bakersfield, CA 93307
Randy
Job Details:
03/25/2025
Removed and replaced harness. Now drained water in unit. But Unit wont lock. Harness bad out of stock. Part comes in Friday. Scheduled for Friday pm. Will have to go grab part from shop that day. ; rqstng P&A on 1 W11670519 (Latch)
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HZ11
Near Bakersfield, CA 93313
Ian Y
Job Details:
03/25/2025
Didnt physically report. Ordering parts for repair based n complaint. Checked unit out 3/20 I didnt want to come back again with no parts. Called customer via 3CX and let them know wed schedule with them as soon as the parts came in. ; ordrng 1 W11222648 (Diode) and 1 W11737661 (Mag) and 1 W11737664 (Transformer)
We serviced a
GENERAL ELECTRIC DRYER - ELECTRIC
Model GTD38EASW0WS
Near Bakersfield, CA 93312
Ian Y
Job Details:
03/25/2025
Attempted harness repair. Unit still not heating. Ordering harness and hi limit and will call Techline in return visit. ; ordrng 1 WE08X37278 (Harness) and 1 WE04X26139 (Hi limit)
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Modesto, CA 95351
Nick D
Job Details:
03/25/2025
"HMI display not responding, LED lights not coming on in display, washers turns on&off in constant drain cycle,could not get it on service test mode.; ordrng 1 W11603810 (Control board) and 1 W10579238 (Upper HMI harness) and 1 W11652038 (Lower harness)"
We serviced a
WHIRLPOOL DRYER
Model WED8127LC1
Near Livingston, CA 95334
Cruz
Job Details:
03/25/2025
"Need work- 240v at block terminal- found heater element to be open and cutoff thermostat to be shorted, causing unit not to heat- ordering parts for unit. Requires authorization.; ordrng 1 WP3387747 (Element) and 1 280148 (Kit)"
We serviced a
WHIRLPOOL WASHER
Model ntw4516fw4
Near Merced, CA 95348
Cruz
Job Details:
03/25/2025
Need work- agitator is stripped at shaft and teeth on transmission shaft are stripped as well- ordering parts for unit. ; ordrng 1 W11454741 (Gear case) and 1 285565 (Agitator)
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Merced, CA 95341
Cruz
Job Details:
03/25/2025
Need work- found pump to be running continuously- no lights at panel- 120v at cntrl- seen this issue before- will need to replace cntrl elec- ordering part for unit. Requires authorization.; ordrng 1 W11608056 (Cntrl elec)
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Gustine, CA 95322
Nick D
Job Details:
03/25/2025
"Wrong ACU shipped,called dispatch and parts dept to get correct part shipped and rescheduled for soonest date,new harness installed.; ordrng 1 W11491433 (Control board)"
We serviced a
MAYTAG WASHER
Model MVW6230HW0
Near Santa Clarita, CA 91387
ERICK H
Job Details:
03/25/2025
"Cx states belt squealing. Performed manual spin test. Confirmed, drive pulley and belt worn. Replaced belt and cam. Performed manual high speed spin test. Noise still present. Removed belt and spun motor by hand. Motor not causing noise. With belt still removed I spun basket by hand. Noise coming from Gearcase. Gearcase has failed. Actuator also noisy during operation. ; ordrng 1 W11449840 (Gearcase) and 1 W10913953 (Shifter)"
We serviced a
WHIRLPOOL WASHER
Model WTW6120HW2
Near El Monte, CA 91732
Jordin Rogers
Job Details:
03/25/2025
F7e7 motor cant get up to correct rpm f7e1 tachnometer is faulty. Found units gear case had failed and was grinding against belt and cover. Belt gear case and cam all need to be replaced. Shavings from gear case got into motor damaging motor as well.; ordrng 1 W10721967 (Cam) and 1 W11449840 (Gearcase) and 1 W11026785 (Motor) and 1 W11239857 (Belt)
We serviced a
GE WASHER
Model GFW550SSN5WW
Near Pismo Beach, CA 93449
Leo R
Job Details:
03/25/2025
DOOR LOCKPN: WH01X29528; ordrng 1 WH01X29528 (DOOR LOCK)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ08
Near Lake Isabella, CA 93240
Brandon
Job Details:
03/25/2025
Water is spilling from the fill tube and causing an ice build up around the evaporator fan blade. Ordering fill tube kit from service pointer W11750800 to correct the issue.; ordrng 1 W10861184 (Clamp) and 1 W11750811 (Fill tube kit)
We serviced a
SPEED QUEEN WASHER
Model AWN63RSN116TW01
Near Lake Isabella, CA 93240
Brandon
Job Details:
03/25/2025
Intermittent chirp happening at idle and during cycles. Called tech support and was suggested to replace the drive motor and UI control. ; ordrng 1 205078P (Control panel) and 1 204659P (Drive control)
We serviced a
WHIRLPOOL WASHER
Model WTW4955HW3
Near Baldwin Park, CA 91706
Jaime
Job Details:
03/25/2025
Death washing machine need the main control board; ordrng 1 W11608056 (Cntrl)
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS0
Near Agoura Hills, CA 91301
Richard R
Job Details:
03/25/2025
Upon arrival inspected unit unit gave me a F8E2 error code inlet water valve electrical problem. Also gave me an F7 E1 error code faulty wash motor and gave me an F1 E2 wax motor problem ordering all parts. Please schedule this job for Saturday in the a.m..; ordrng 1 W11416362 (Motor assembly) and 1 W11434044 (Inlet valve) and 1 W11649995 (Wax motor)
We serviced a
AMANA WASHER
Model NTW4516FW3
Near South El Monte, CA 91733
Jordin Rogers
Job Details:
03/25/2025
Found broke propeller in drain pump ; ordrng 1 W10919003 (Pump)
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FPFU19F8WF2
Near Madera, CA 93636
Timothy
Job Details:
03/25/2025
Removed evaporator panel and found the thermistor kit I have is not the correct one.; ordrng 1 5304524828 (Derogatory thermistor NTC)
We serviced a
GENERAL ELECTRIC RANGE - GAS
Model CGS700P2M5S1
Near Oxnard, CA 93035
Isidro
Job Details:
03/25/2025
"Installed new control board UI panel, set clock and ran a bake cycle to 350 and unit is shut down in the middle of the cycle,also blower wheel is noisy even after trying to repair. I called tech support was advised to replace DC wire harnesses and blower wheel with sensor, ; ordrng 1 WB26X35086 (Blower cooling fan) and 1 WB27X28659 (Sensor) and 1 WB18X31609 (Main harness wire) and 1 WB18X31604 (Blower wire harness) and 1 WB18X41891 (Jumper harness)"
We serviced a
MAYTAG WASHER
Model MVWC565FW1
Near Patterson, CA 95363
Nick D
Job Details:
03/25/2025
"Drain pump failure, drain hose line found in to deep in drain line,need drain pump replacement, customer advised to empty water and have washer ready for repair.; ordrng 1 W10876600 (Drain pump)"
We serviced a
WHIRLPOOL WASHER
Model MVW6230HW3
Near Pomona, CA 91768
Jaime
Job Details:
03/25/2025
Found washing machine leaking a lot. Also found a bunch of error codes related to user interface and control board. Had all parts ordered; ordrng 1 W11449840 (Transmission) and 1 W11550891 (Agitator) and 1 W11478524 (UI) and 1 W11624938 (Cntrl)
We serviced a
WHIRLPOOL M/W OVEN WALL
Model KOCE500ESS22
Near Bakersfield, CA 93308
Joe P
Job Details:
03/25/2025
"Temperature high was 381 F ,then stayed at 339F and never went back up.Ordering UI BOARD. Microwave support broken, ordered element support.; ordrng 1 W11724411 (Support) and 1 W11600634 (UI control board)"
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC300EBS07
Near Bakersfield, CA 93314
Joe P
Job Details:
03/25/2025
"Control damper very noisy, FZ temperature-1F , FF temperature 41f and drops 31F. Ordering control damper.; ordrng 1 WPW10594329 (Control damper)"
We serviced a
GENERAL ELECTRIC DISHWASHER - BUI
Model CDT888P41VW2
Near Bakersfield, CA 93314
Joe P
Job Details:
03/25/2025
"Drain pump is making noise, removed filter from inside found pieces of plastic and Styrofoam, customer has never used unit ordering drain pump and wash pump.; ordrng 1 WD19X25622 (Drain pump) and 1 WD19X25623 (Wash pump)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ06
Near Bakersfield, CA 93314
Joe P
Job Details:
03/25/2025
"Changed filter , still has bad metallic taste. Ordering all water lines, due to contamination from water lines and water reservoir. Removed new filter reinstalled old filter, left new filter with customer to store refrigerator and will install when lines come in.; ordrng 1 W11567542 (Tube water) and 1 WPW10279831 (Tube water) and 1 WPW10238092 (Tube water) and 1 WPW10394053 (Water filter housing) and 1 WPW10271543 (Connector) and 1 W11613294 (Water reservoir)"
We serviced a
WHIRLPOOL WASHER
Model MVW7232HW0
Near Camarillo, CA 93010
Richard R
Job Details:
03/25/2025
"On arrival, inspected unit found unit not wanting to agitate or spin during further inspection underneath found large amounts of gear oil, completely coating, inner part of stater and rotor and all over the floor ordering stater rotor and spanner nut. Please resend suspension wash plate, slider, and gear case.; ordrng 1 W10915700 (Stater) and 1 W10754448 (Clutch) and 1 W10915701 (Rotor) and 1 W11551646 (Spanner nut)"
We serviced a
GENERAL ELECTRIC UNKNOWN
Model JVM6175YK5FS
Near San Luis Obispo, CA 93401
Jack
Job Details:
03/25/2025
Case number 16179619 Chris with tag. Latch assembly and mag kit was replaced. Cap diode and transformer replaced. Video chat the symptoms and found transformer out causing fuse-able link to go out also. WB26X35514 transformer. Fuse-able link WB27X35672. Cap WB27X11011. WB27X35382 diode. Need to sign for removal. ; ordrng 1 WB26X35514 (Transformer) and 1 WB27X35672 (Fusable-link) and 1 WB27X11011 (Cap) and 1 WB27X35382 (Diode)
We serviced a
WHIRLPOOL WASHER
Model WTW6157PW0
Near Patterson, CA 95363
Nick D
Job Details:
03/25/2025
"Replaced control board ACU sent, HMI still not responding, UI test all LEDs responding but machine will not start, request wire harness, HMI encoder. Square Trade updated on parts requested.; ordrng 1 W11627516 (HMI encoder) and 1 W11662667 (Harness UI) and 1 W11731988 (Lower harness)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ07
Near Orcutt, CA 93455
George
Job Details:
03/25/2025
Found refrigerator compressor exexively loud intermently buzzing then kicking off compressor exexively hot need seal tech for repair.file#7741217270. ; ordrng 1 W11557425 (Compressor)
We serviced a
MAYTAG RANGE
Model MGR7700LZ0
Near Bakersfield, CA 93308
Jim
Job Details:
03/25/2025
Unit would not spark upon arrival but once I moved the ignition wire the oven worked every time; ordrng 1 W11161843 (Harness bake/broil)
We serviced a
WHIRLPOOL WASHER
Model CHW9150GW1
Near Los Angeles, CA 91602
Tim B
Job Details:
03/25/2025
"Found F 27 code on unit called into tech line, but the commercial tech line closes at 4 PM Eastern standard time unable to contact to see what parts are covered under the service pointer. Service point it does say to replace control board which it looks like control board has been replaced before need to document with tech line."
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Crows Landing, CA 95313
Nick D
Job Details:
03/25/2025
"Control board failure, test 1 UI failed on a reset, 120VAC to ACU, HMI would not go into test mode or any normal cycle, LED on ACU flashing.; ordrng 1 W11626074 (Control board) and 1 W11643701 (Lower Harness)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ00
Near Ontario, CA 91764
Bob S.
Job Details:
03/24/2025
"Customer complaint old unit door ice maker went out. Upon inspection of the old unit door and new unit door, it was noticed that the water lines were different on both doors. I took pictures on the old units door waterlines.I took pictures of the new unit door waterlines. To show the problem and difference in diameter. We werent able to connect the waterlines to the new door properly.In order for unit to operate as designed. ; O-emld tckt"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ04
Near Merced, CA 95348
Cruz
Job Details:
03/24/2025
"Need work- found damper to ice over, will need to replace- cx states noise stop, unable to duplicate issue- cx will take a video- cooling and temperature are working fine at this time- ordering part for unit. ; ordrng 1 WPW10594330 (Damper)"
We serviced a
GENERAL ELECTRIC WASHER
Model GTW465ASN9WW
Near Newman, CA 95360
Nick D
Job Details:
03/24/2025
"Agitator bolt broken and missing,agitator loose not on bearing.; ordrng 1 WH02X24374 (1/4-20 agitator bolt)"
We serviced a
KITCHENAID REFRIGERATOR
Model KBSD708MPS00
Near Bakersfield, CA 93311
Randy
Job Details:
03/24/2025
Unit is frozen over. Defrost heater not working no airflow to fridge side. Need to defrost manually. Thermistor not reading in range. Scheduled for Friday. ; ordrng 1 W11631626 (Motor evap) and 1 W11626107 (Heater) and 1 WP2188820 (Thermistor freezer) and 1 W11629268 (Evap thermistor)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX986SIHZ00
Near Ceres, CA 95307
Cruz
Job Details:
03/24/2025
"Need work- found freezer evaporator fan not working in diagnostic test 03- found ice at on evaporator cover, ice box fan not working in diagnostic 36- lights on panel are dimming unable to see numbers- ice maker motor is stripped- ordering part for unit. ; ordrng 1 W11387386 (Panel ui) and 1 W11452196 (Fan) and 1 W10846539 (Fan)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ09
Near Piñon Hills, CA 92372
Cesar
Job Details:
03/24/2025
Stripped impeller on auger motor cant separate will require housing also found failed fresh food door gasket causing air leaks ; ordrng 1 WPW10309864 (Housing) and 1 WP63052-2 (Impellar) and 1 W11671282 (Motor) and 1 W10830274 (Gasket)
We serviced a
KITCHENAID OVEN
Model KODE507ESS21
Near Glendale, CA 91207
Oscar L
Job Details:
03/24/2025
"As per Ericks morning instructions, I am to be there and address doors gaskets issues take pictures and document my recommendations. So I called consumer 20 minutes before my arrival, when I got there, he repeated the same story as my previous visit. Kitchen Aid said that they will pay for parts and labor so Ive asked him for some source of Authorization number and he had an email that was referring to the gaskets issues nothing else. So long story short, customer want us to dismantle the two ovens doors and to clean out the stains within the outer and inner glasses. So I have explained one more time that those stains wouldnt prevent the unit for delivering proper performance, and he did not accept that. Further more he said hell call Kitchen aid again and would have another company replace those doors. So subsequently, I called Erick and related what was going on, for which he recommended taken pictures of what the customers main concern is, we will submit the claim to Whirlpool and go from there.; saved tckt"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ1
Near Upland, CA 91786
Jaime
Job Details:
03/24/2025
There is an issue with harness. Some voltage is not presentNOTE: Will require double labor pls. ; ordrng 1 W11590537 (Harness)
We serviced a
WHIRLPOOL WASHER
Model MVW4505MW1
Near Bakersfield, CA 93307
Randy
Job Details:
03/24/2025
Unit wont start found broke harness. ; ordrng 1 W11643701 (Harness)
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Santa Clarita, CA 91355
Felipe S
Job Details:
03/24/2025
"Upon arrival customer stated the unit is no leveled correctly and shaking to much, because the adjustable legs are broken. Check the unit and found the rear legs broken. This unit will need new adjustable legs. ; ordrng 1 W11213957 (Legs)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT710PAHW1
Near Fresno, CA 93720
Timothy
Job Details:
03/24/2025
5-1(door switch stuck) open4-3(motor fault)7-1(control turned off heater) ; ordrng 1 W11665769 (Sump assembly)
We serviced a
FRIGIDAIRE MICROWAVE
Model GCWM2767AFE
Near Tehachapi, CA 93561
Ian Y
Job Details:
03/24/2025
Requesting second man due to unit being close to built in refrigerator and the angle its at wont allow oven dolly enough space to support unit without potienal damage to refrigerator. ; O-emld tckt
We serviced a
WHIRLPOOL DRYER
Model WGD5100HC3
Near Delano, CA 93215
Esteban S
Job Details:
03/24/2025
"All thermostats tested good control,board getting power but not responding. Control board on order follow up required. ; ordrng 1 W11531525 (Control board)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ
Near Glendale, CA 91204
Oscar L
Job Details:
03/24/2025
"Visual and physical inspection leaded me to an acting up UI, the digits are fading out. and a broken crisper drawer that must be replaced.; ordrng 1 W10366647 (Deli pan) and 1 W10396909 (Front deli pan) and 1 W10233560 (UI Black)"
We serviced a
MAYTAG WASHER
Model MVWC565FW2
Near Fontana, CA 92337
Francisco
Job Details:
03/24/2025
Found a loud squeaking noise at times when machine spins. Also motor making a weird noise when spun by hand ordering parts please rs asap; ordrng 1 W10586077 (Basket) and 1 W10870913 (G case) and 1 W10808317 (Belt) and 1 W10677717 (Motor)
We serviced a
GENERAL ELECTRIC WASHER
Model GFW550SSN5WW
Near Bakersfield, CA 93304
Brandon A
Job Details:
03/24/2025
Survive pointer says to change the pump and control board. Did tests and drain pump is not working. Ordered a control board and drain pump on return visit. ; ordrng 1 WH22X37837 (Control board)
We serviced a
WHIRLPOOL MICROWAVE
Model WMH31017HS12
Near California City, CA 93505
Brandon
Job Details:
03/24/2025
Light on the bottom of the cabinet was burnt out upon unboxing. Ordering replacement.; ordrng 1 W11520384 (Bulb)
We serviced a
WHIRLPOOL DRYER
Model MGD8630HW3
Near Bakersfield, CA 93312
Aaron
Job Details:
03/24/2025
Needs 2 call count Unit is vibrating needs seal kit and motor clamps as well as motor and blower wheel ; ordrng 1 W11401018 (Seal kit) and 2 WPW10121316 (Clamps)s
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHV06
Near Merced, CA 95341
Cruz
Job Details:
03/24/2025
"Need work- compressor is OOS- locked up compressor- cx states food is freezing in ff compartment- thermistor is reading out of range, damper is making a loud grinding noise- ordering parts fo4 unit. - requires authorization- ; ordrng 1 W11557425 (Compressor) and 1 W11556912 (Cntrl elec) and 1 WPW10196393 (Damper) and 1 W10316760 (Thermistor)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRQA59CNKZ01
Near Bakersfield, CA 93301
Brandon
Job Details:
03/24/2025
Led module is dead. Ordering replacement. Item is backordered.; ordrng 1 W11470191 (Led module)
We serviced a
WHIRLPOOL DRYER
Model MGD6630HW0
Near Bakersfield, CA 93309
Randy
Job Details:
03/24/2025
"Unit wont turn. Tested found slow with nothing in it. Found shorted moisture sensor. Ordering all parts needed. ; rqstng P&A on 1 W11364931 (Motor), ordrng 1 661570V (Belt) and 1 WP697772 (Blower wheel), rqstng P&A on 1 W10906551 (Housing)"
We serviced a
KITCHENAID M/W OTR
Model KMHS120ESS1
Near Glendora, CA 91740
Jaime
Job Details:
03/24/2025
Cracked door needs to be replaced; ordrng 1 W10727603 (Door)
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Piñon Hills, CA 92372
Cesar
Job Details:
03/24/2025
"F3E1 pressure system fault. Pressure Hose is clear, determined failed control. Continues to run drain pump when unit is empty per tech line Ive been told damage to control can be caused by failed DC circuit on shifter ; ordrng 1 W11603810 (Control) and 1 W11481722 (Shifter)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ
Near Bakersfield, CA 93311
Brandon A
Job Details:
03/24/2025
Tested unit. Unit wont start. Installed UI panel and door latch. Unit still wont run. Ordered a control board. ; ordrng 1 W11637583 (Control board)
We serviced a
KITCHENAID MICROWAVE
Model KMBS104ESS02
Near Bakersfield, CA 93311
Felipe S
Job Details:
03/24/2025
Upon arrival found unit not heating up. Check the unit and resistance from the primary terminals is about 3.5 ohms this is way of range. This unit will need new transformer and high voltage components in order to resolve this issue. ; ordrng 1 W10891908 (Control board) and 1 W11409822 (Magnetron) and 1 W11672685 (Transformer)
We serviced a
WHIRLPOOL DRYER
Model UNKNOWN
Near Los Angeles, CA 91401
Oscar L
Job Details:
03/24/2025
"Functional testing suggests and skipping noise inside timer, suggesting bad timer, also would like to bring with me a belt switch. ; ordrng 1 3406725 (Timer unit) and 1 3394881 (Belt switch)"
We serviced a
MAYTAG WASHER
Model MVW6500MBK0
Near Moreno Valley, CA 92553
Kevin
Job Details:
03/24/2025
"Until not shifting into spin. I found that the tub seal on gearcase is leaking and water damaged actuator, belt, cam and bearings in gearcase. Agitator is seized. Unit needs agitator, gearcase, belt, actuator, and cam. Ordering parts. Needs autho. ; rqstng P&A on 1 W11656227 (Agitator) and 1 W11449840 (Gearcase) and 1 Wpw10006384 (Belt) and 1 W11481722 (Actuator) and 1 W10721967 (Cam)"
We serviced a
WHIRLPOOL WASHER
Model WTW8127LW
Near Santa Maria, CA 93455
Leo R
Job Details:
03/24/2025
"Unit found overloaded with laundry and water, going to need extra time to bail out (vacuum ) water to a bathroom or kitchen, saw motor screw on the floor , JJ emitting a loud hum, lid locked and full of clothes/water, ran diagnostics program and F6E3, F0E7, F9E1 error codes were found, lock latch , strike, slider, main control board and drain pump would need replacing, Ordering following parts:W11396717 Drain pump assembly, W11621180 CONTROL UNIT ASSEMBLY, W11457841 Strike, W11700916 LID LOCK W10734521 SLIDER.; ordrng 1 W11396717 (Drain pump assembly) and 1 W11621180 (CONTROL UNIT ASSEMBLY) and 1 W11457841 (Strike) and 1 W11700916 (LID LOCK LATCH) and 1 W10734521 (SLIDER)"
We serviced a
MAYTAG DRYER
Model MGD6230HW0
Near Palmdale, CA 93551
Samson O
Job Details:
03/24/2025
"Cx complain about dryer making a rattling noise, found unit robbing against the round metal object behind unit(picture attached). Reposition unit and reinstalled vent. Unit test ok. Complete"
We serviced a
WHIRLPOOL ELECTRIC DRYER
Model n/a
Near Merced, CA 95340
Cruz
Job Details:
03/24/2025
"Fixed- cx states lights will flash and unit will not start- found loose wire at panel ui, reseated, then tested all lights are now working and unit is starting- cx ok repair"
We serviced a
WHIRLPOOL DRYER
Model WED6150PB0
Near Lindsay, CA 93247
J.E.
Job Details:
03/24/2025
Cycled unit and found loose screws on door causing alignment issue on door catch. Tightened and secured door screws retested unit door now closing as designed. Job completed
We serviced a
WHIRLPOOL DRYER
Model WGD4950HW2
Near Los Angeles, CA 91367
Giovanni M
Job Details:
03/24/2025
CX said the unit wasnt drying properly. Upon diagnosis I found the duct to be kinked. I uninstalled unit and then reinstalled so the duct wasnt kinked.
We serviced a
MAYTAG DRYER
Model MED7230HW2
Near Turlock, CA 95380
Cruz
Job Details:
03/24/2025
"Fixed- used part from stock (4392067 dryer kit) found rollers to be kocking during all cycles- removed bad ones and then installed new (dryer repair kit) tested unit, no knocking sound, good air flow, heating as designed- cx ok repair ; used 1 4392067 (Dryer repair kit) from stock"
We serviced a
MAYTAG DRYER
Model MGDC465HW0
Near Ontario, CA 91764
Jaime
Job Details:
03/24/2025
Had a limit thermostat kit installed; used 1 W11050897 (Cut off kit) from stock
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW1
Near Los Angeles, CA 91364
Giovanni M
Job Details:
03/24/2025
Unit is getting a F0E9 error code. Cleared the error code and ran a diagnostic test cycle and everything came back good. Found a problem with one of the springs. I uninstalled and then reinstalled properly. Everything is working as designed at this time.
We serviced a
MAYTAG WASHER
Model MVWC565FW2
Near Merced, CA 95348
Cruz
Job Details:
03/24/2025
Fixed- used part from stock (w10913953 actuator) found f5e7 actuator failure- unit is not agitating due to bad actuator- removed bad one and then installed new (actuator) calibration test pass- auto test pass- no leaks- no error- cx ok repair ; used 1 W10913953 (Actuator) from stock
We serviced a
WHIRLPOOL WASHER
Model WTW6157PB0
Near Lindsay, CA 93247
J.E.
Job Details:
03/24/2025
Cycled unit and found unit not shifting properly causing of balance. Found bad connection to shifter. Secured shifter connection and retested unit now working as designed job completed
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near Thousand Oaks, CA 91360
Giovanni M
Job Details:
03/24/2025
"Unit was getting a F7E1 error code. I replaced the actuator and capacitor from truck stock to repair the unit. Ran a diagnostic cycle after and the unit is working as designed at this time. ; used 1 W11481722 ( Actuator), and 1 W11395618 (Capacitor) from stock"
We serviced a
WHIRLPOOL WASHER
Model WTW5100HW3
Near Merced, CA 95348
Cruz
Job Details:
03/24/2025
Fixed-used part from stock (w11395618 capacitor) found f7e1 capacitor failure- unit will not start a cycle due to a capacitor- removed bad one and then installed new (capacitor) capacitor test pass- auto test pass- no leaks- no errors- cx ok repair ; used 1 W11395618 (Capacitor) from stock
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Santa Clarita, CA 91355
Felipe S
Job Details:
03/24/2025
"Upon arrival found unit with error code F9E1, this about no drain. Check the unit and is no water and pump still running. Blow air to the hose, and check the pressure hose, alls seems to be good. This unit still having the problem. Replace the control board on the unit. Retest the unit and now is working properly. Job complete"
We serviced a
WHIRLPOOL WASHER
Model WTW8127LW0
Near Tulare, CA 93274
J.E.
Job Details:
03/24/2025
Cycled unit and found fratricidal dispenser out opposition made adjustments to fabric dispenser and retested unit no Longer leaking. Job completed
We serviced a
MAYTAG WASHER
Model MVW6500MBK0
Near Clovis, CA 93619
Timothy
Job Details:
03/24/2025
"Checked for faults and found a 0-3 (overload), 7-1( tach missing/wrong sig NAl), 2-3(acu/ui mismatch). In the service cycle the tub did not disconnect for the agitation portion. Looked under unit and found the actuator and clutch were not attached. Removed both components, inspected and reinstalled them . Ran a service test and found the unit completed the cycle . Calibrated unit. Unit operating as designed."
We serviced a
WHIRLPOOL WASHER
Model WTW4955HW3
Near Nipomo, CA 93444
Leo R
Job Details:
03/24/2025
"Ran diagnostics program, no error codes, looked under unit, belt has nice tension and taught, no signs of oil leakage, back panel is firmly secured to cabinet as shown in service pointer, CX described overloading unit and calibrated unit to maker specs and passed, ran a quick wash cycle to test unit and it ran properly, Job complete."
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Planada, CA 95365
Manuel B
Job Details:
03/24/2025
Washer drain pump is working good on site. Customer said not draining All cycles pass.
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ3
Near Castaic, CA 91384
Felipe S
Job Details:
03/24/2025
"Upon arrival found unit with error code F8E2, this about the inlet valve electrical problem. Erase the code and run test cycle, pump is having a noise when is running, but no water is present at the spray arms, only in the bottom of the unit. This unit has a bad pump assembly. Replace the pump, retest the unit and now is working properly. Job complete"
We serviced a
WHIRLPOOL RANGE
Model WFG745H0FS0
Near Moreno Valley, CA 92553
Kevin
Job Details:
03/24/2025
Unit not lighting in middle burner. I found loose wire on ignitor and ignitor was not sparking. I attached wire and tested. All tests good.
We serviced a
WHIRLPOOL WASHER
Model WTW5000DW3
Near Lindsay, CA 93247
J.E.
Job Details:
03/24/2025
"Cycled unit and found faulty actuator causing damage to belt and cam. Installed new actuator, cam and belt retested unit now working as designed job completed ; used 1 W11239857 (Belt), 1 W1148722 (Actuator), and 1 W10721967 (Cam) from stock"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRFF3236RB00
Near Bakersfield, CA 93312
Felipe S
Job Details:
03/24/2025
Upon arrival found unit with ice maker arm stuck in the ice bin when the drawer was on close position. This was causing the ice maker think the ice bin was full. Readjust the ice bin on the right position. Retest the unit and now ice maker starts production. Job complete
We serviced a
FRIGIDAIRE FREEZER
Model FPFU19F8WF7
Near Camarillo, CA 93010
Isidro
Job Details:
03/24/2025
"Minor frost chunk accumulating on evaporator drip drain pan middle area, I adjusted the drip pans edges inwards to catch water better when defrosting, unit is now draining properly as designed at this time of service"
We serviced a
MAYTAG DRYER
Model MGDB835DW4
Near Bakersfield, CA 93309
Felipe S
Job Details:
03/24/2025
Install the new blower and motor on the unit. Retest and now is working properly. Job complete
We serviced a
WHIRLPOOL RANGE
Model WFG525S0JZ1
Near Tehachapi, CA 93561
Ian Y
Job Details:
03/24/2025
"Customer was complaining bake would only start intermittently. Remove and replaced units spark module/dsi board. Tested, unit started up in bake 5 times in a row. Job complete."
We serviced a
MAYTAG WASHERHER
Model MVW6230HW3
Near Palmdale, CA 93551
Samson O
Job Details:
03/24/2025
"Found unit out of balance due to the rear leg being crooked, straightened it and balance unit. Unit sitting on drainage plastic which makes leveling difficult. Complete"
We serviced a
MAYTAG DRYER
Model MGD4500MW1
Near Delano, CA 93215
Esteban S
Job Details:
03/24/2025
"Motor, blower, rollers, pulley and belt were removed and replaced. Unit passed all test. Unit is working as intended."
We serviced a
MAYTAG WASHER
Model MVWB865GW0
Near Los Angeles, CA 91326
Giovanni M
Job Details:
03/24/2025
Replaced the lid and hinges. Tested unit after to make sure it locks. Everything is working as designed at this time.
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Bakersfield, CA 93314
Aaron
Job Details:
03/24/2025
"Checked the unit the washer in spin was chattering , looked underneath missing rotor bolt , pulled rotor. Slider ok , used slider kit to replace missing part , installed bolt , tested operations ok now at this time"
We serviced a
MAYTAG WASHER
Model MVWB835DW5
Near Azusa, CA 91702
Jaime
Job Details:
03/24/2025
"Installed a new suspension, clutch,& Transmission"
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Los Angeles, CA 91356
Oscar L
Job Details:
03/24/2025
"As all pre diagnosed parts and components were replaced, a successful functional testing was achieved."
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Bakersfield, CA 93314
Felipe S
Job Details:
03/24/2025
"Install the new harness and control board, retest the unit and now is working properly. Job complete"
We serviced a
MAYTAG DISHWASHER
Model MDB4949SDZ0
Near Highland, CA 92346
Francisco
Job Details:
03/24/2025
"Cx stated unit was leaking from sides. Removed and replaced gasket, tested ops unit working properly"
We serviced a
GENERAL ELECTRIC WASHER
Model GFW850SPN5RS
Near Bakersfield, CA 93309
Felipe S
Job Details:
03/24/2025
Upon arrival found unit with gasket damage causing the leak. Replace the gasket on the unit. Retest the unit and now is working properly. Job complete
We serviced a
KITCHEN AID REFRIGERATOR
Model KRFF507HPS03
Near Los Angeles, CA 91326
Giovanni M
Job Details:
03/24/2025
Found a leak in one of my welds. I went over the welds and got the unit to hold a vacuum of -28 for 15 min. Charged and let CX know unit will take a good 12 hrs to cool down
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC302ESS00
Near Los Angeles, CA 91307
Sean W
Job Details:
03/24/2025
"Replaced ice maker and jumped t and h terminals,ice maker motor rotated and filled tray with water,ice maker and fridge now working properly."
We serviced a
MAYTAG WASHER
Model MHW5100DW0
Near Clovis, CA 93612
Timothy
Job Details:
03/24/2025
Installed the pressure sensor and tested.
We serviced a
KITCHENAID REFRGERATOR
Model KRFC704FPS06
Near Hesperia, CA 92345
Cesar
Job Details:
03/24/2025
Replaced controls tested good at this time
We serviced a
KITCHEN AID REFRGERATOR
Model KRFC704FPS05
Near Castaic, CA 91384
Felipe S
Job Details:
03/24/2025
"Install he new new vent gasket and ice door, the ice for gasket was coming turned, reformed with heat. Readjust and now unit is working properly. Job complete"