Near Fresno, CA 93711
Ian
Job Details: 10/03/2018
kitchenaid dishwasher KDFE104DWH5 found all functions working correctly at time of visit. It appears customer was overfilling rinse aid reservoir, and did not know that it was currently full. Gave customer instructions on rinse aid use and cycle functionality. no faults or failures at time of visit.; Job Completed.
Near Fresno, CA 93711
Ian
Job Details: 10/03/2018
kitchenaid dishwasher KDFE104DWH5 found all functions working correctly at time of visit. It appears customer was overfilling rinse aid reservoir, and did not know that it was currently full. Gave customer instructions on rinse aid use and cycle functionality. no faults or failures at time of visit.; Job Completed.
Near Fresno, CA 93711
Ian
Job Details: 10/03/2018
kitchenaid dishwasher KDFE104DWH5 found all functions working correctly at time of visit. It appears customer was overfilling rinse aid reservoir, and did not know that it was currently full. Gave customer instructions on rinse aid use and cycle functionality. no faults or failures at time of visit.; Job Completed.
Near Fresno, CA 93711
Ian
Job Details: 10/03/2018
kitchenaid dishwasher KDFE104DWH5 found all functions working correctly at time of visit. It appears customer was overfilling rinse aid reservoir, and did not know that it was currently full. Gave customer instructions on rinse aid use and cycle functionality. no faults or failures at time of visit; Job Completed.
Near Fresno, CA 93711
Ian
Job Details: 10/03/2018
kitchenaid dishwasher KDFE104DWH5 found all functions working correctly at time of visit. It appears customer was overfilling rinse aid reservoir, and did not know that it was currently full. Gave customer instructions on rinse aid use and cycle functionality. no faults or failures at time of visit; Job Completed.
Near Fresno, CA 93711
Ian
Job Details: 10/03/2018
whirlpool refrigerator WRX735SDBM02 freezer door did not come into contact with switch. Adjusted height of door until it depressed switch. Door now engages switch properly. Customer states icemaker will only work intermittently. Found icemaker module not receiving power from control board. Found proper power at board, but found no continuity Through icemaker harness plug. This issue is not repairable.
Near Fresno, CA 93711
Ian
Job Details: 10/03/2018
whirlpool refrigerator WRX735SDBM02 freezer door did not come into contact with switch. Adjusted height of door until it depressed switch. Door now engages switch properly. Customer states icemaker will only work intermittently. Found icemaker module not receiving power from control board. Found proper power at board, but found no continuity Through icemaker harness plug. This issue is not repairable.
Near Fresno, CA 93711
Ian
Job Details: 10/03/2018
whirlpool refrigerator WRX735SDBM02 freezer door did not come into contact with switch. Adjusted height of door until it depressed switch. Door now engages switch properly. Customer states icemaker will only work intermittently. Found icemaker module not receiving power from control board. Found proper power at board, but found no continuity Through icemaker harness plug. This issue is not repairable.
Near Fresno, CA 93720
Ian
Job Details: 10/03/2018
maytag dryer MVWB725BW0 Installed parts and tested unit in auto test cycle, and high-speed spin. Unit now tests good with no further issues, no leaks or damage to home
Near Fresno, CA 93720
Ian
Job Details: 10/03/2018
whirlpool refrigerator WSF26C3EXF01 Found bottom door cams worn almost completely off. Installed provided cam parts, and level the door to customer satisfaction. Unit now tests good with no damage to home.; Job Completed.
Near Fresno, CA 93720
Ian
Job Details: 10/03/2018
whirlpool refrigerator WSF26C3EXF01 Found bottom door cams worn almost completely off. Installed provided cam parts, and level the door to customer satisfaction. Unit now tests good with no damage to home.; Job Completed.
Near Fresno, CA 93720
Ian
Job Details: 10/03/2018
whirlpool refrigerator WSF26C3EXF01 Found bottom door cams worn almost completely off. Installed provided cam parts, and level the door to customer satisfaction. Unit now tests good with no damage to home.; Job Completed.
Near Clovis, CA 93611
Ian
Job Details: 10/03/2018
whirlpool range WEG730H0DS0 unit has F8E0 low fan speed error. Fan does not come on during operation at temperatures above 170° when it’s supposed to. Got inconsistent reading from both fan and the Hall sensor. Need Both parts to eliminate variables.; ordrng 1 W10453986 (cntrl-elec) and 1 W10780482 (fan-blwr), Installed parts and unit now tests good with no leaks or damage to home.; Job Completed.
Near Clovis, CA 93619
Chris
Job Details: 10/03/2018
maytag washer MVWB835DW1 Customers issue there a hearing a loud noise during spin cycle. Upon arrival I first checked wash plate To make sure teeth are not ground out or nothing was rolling around in between the plate and inner basket. I found some change in between the two removed and securely tightened wash play back down. I didn’t tilted washer over to access motor I found bolt holding stater on was coming loose causing a sound. Tighten that up then ran Through test cycle with customer next to me. No longer hear any noises. All functions tested good. Instructed customer on proper maintenance and loading procedure. Job completed
Near Fresno, CA 93711
Chris
Job Details: 10/03/2018
kitchenaid refrigerator KRMF706ESS01 One return visit I replaced user interface and also main control board and back of refrigerator. Since I was previously out here customer stated refrigerator has been running really good with no cooling issues ever since I made some changes To settings in diagnostics. I still proceeded to change out the Controls on the unit just in case it was an intermittent issue. All functions test normal. Job completed.
Near Fresno, CA 93730
Chris
Job Details: 10/03/2018
whirlpool refrigerator WRX735SDHZ00 On return visit today found icemaker filled tube froze up. Pulled the icemaker out found a piece of foam stuck at the bottom of the trough therefore not allowing water to disburse in the icemakerThe trough is also cracked therefore leaking water into the ice container causing clumping issues. Cleared all ice installed new icemaker. All functions tested good job completed; Job Completed.
Near Fresno, CA 93720
Chris
Job Details: 10/03/2018
whirlpool refrigerator WRX988SIBM03 Customer had temperature concerns also icemaker was not producing ice. First I found icemaker had timed out and Cannot find a home position. Also on fill test The The water valve solenoid is not opening for the icemaker therefore no waters getting to it.Also coil is icing up in refrigerator compartment ordering more accurate thermistor And evap motor and wire harness.; ordrng 1 W10843055 (cntrl-elec) and 1 W10902214 (thermistor) and 1 W11087438 (motor-evap) and 1 W11188383 (ICE MAKER) and 1 WPW10341329 (water valve assy) and 1 WPW10389152 (support), replaced control board in back of refrigerator also replaced ice maker and Defective water valve. Installed new thermistor And motor harness. Powered refrigerator back on all functions tested good. Also leveled out refrigerator and tighten door handles. Job completed.
Near Fresno, CA 93720
Chris
Job Details: 10/03/2018
whirlpool refrigerator WRX988SIBM03 Customer had temperature concerns also icemaker was not producing ice. First I found icemaker had timed out and Cannot find a home position. Also on fill test The The water valve solenoid is not opening for the icemaker therefore no waters getting to it.Also coil is icing up in refrigerator compartment ordering more accurate thermistor And evap motor and wire harness.; ordrng 1 W10843055 (cntrl-elec) and 1 W10902214 (thermistor) and 1 W11087438 (motor-evap) and 1 W11188383 (ICE MAKER) and 1 WPW10341329 (water valve assy) and 1 WPW10389152 (support), replaced control board in back of refrigerator also replaced ice maker and Defective water valve. Installed new thermistor And motor harness. Powered refrigerator back on all functions tested good. Also leveled out refrigerator and tighten door handles. Job completed.
Near San Joaquin, CA 93660
Irvin
Job Details: 10/03/2018
maytag dryer MVWX655DW0 the washer has weak suspension, bottoms out in push test. removed failed suspension, installed replacement W11130362 (Suspension). calibration passed. all ops normal. ; Job Completed.
Near San Joaquin, CA 93660
Irvin
Job Details: 10/03/2018
maytag dryer MVWX655DW0 the washer has weak suspension, bottoms out in push test. removed failed suspension, installed replacement W11130362 (Suspension). calibration passed. all ops normal. ; Job Completed.
Near Kerman, CA 93630
Irvin
Job Details: 10/03/2018
frigidaire refrigerator FFHT2032TP1 replaced drier, installed process stub. vacc and chrg system to proper level 4.5z. unit is cooling. all ops normal. allow 24 hrs to cool. ; Job Completed.
Near Madera, CA 93637
Irvin
Job Details: 10/03/2018
FRIGIDAIRE REFRIGERATOR FFHB2740PE CUSTOMER INSTRUCT. THE CUSTOMER IS SAYS THE ICE MAKER IS NOT OPERATING CORRECTLY. THE BUCKET HAS ICE INSIDE.
Near Madera, CA 93637
Irvin
Job Details: 10/03/2018
FRIGIDAIRE REFRIGERATOR FFHB2740PE CUSTOMER INSTRUCT. THE CUSTOMER IS SAYS THE ICE MAKER IS NOT OPERATING CORRECTLY. THE BUCKET HAS ICE INSIDE.
Near Hughson, CA 95326
Cruz
Job Details: 10/03/2018
whirlpool cooktop WGG555S0BSS0 customer stated they are going to purchase a new unit, customer paid for service call send cx a receipt via email address
Near Hughson, CA 95326
Cruz
Job Details: 10/03/2018
whirlpool cooktop WGG555S0BSS0 customer stated they are going to purchase a new unit, customer paid for service call send cx a receipt via email address
Near Merced, CA 95341
Cruz
Job Details: 10/03/2018
roper dryer RED4516FW0 drum is not turning, I then removed front panel and drum found belt to be broken, replaced bad one with new one from SP (4392065), into unit. Reassembled drum and front panel tested unit n a high heat cycle it heated fine, drum is turning customer ok repair. ; used 1 4392065 (DRYER REPAIR KIT)
Near Merced, CA 95341
Cruz
Job Details: 10/03/2018
roper dryer RED4516FW0 drum is not turning, I then removed front panel and drum found belt to be broken, replaced bad one with new one from SP (4392065), into unit. Reassembled drum and front panel tested unit n a high heat cycle it heated fine, drum is turning customer ok repair. ; used 1 4392065 (DRYER REPAIR KIT)
Near Delhi, CA 95315
Cruz
Job Details: 10/03/2018
MAYTAG DRYER MEDB950YG0 different cycles are not responding on unit, customer unit is working but some cycles customer can not select, unit needs a console unit is OOW part (wpw10338347 console) customer declined repair.
Near Tracy, CA 95376
William
Job Details: 10/03/2018
WHIRLPOOL REFRIGERATOR WRX735SDBM03 Unit does not fit in home see pictures. Found waterline pinched/collapsed behind the fridge. Found freezer door not sealing properly. Freezer light sw frozen. Called WP TL Ref #7722989871, was not advised on freezer door issues, was told to instruct cx to use a nylon reinforced waterline. Adjusted water line at back of fridge, Ordered parts for freezer door alignment, water filter cover, light switch, 2 call count; ordrng 1 WP12466115SP (light switch) and 1 WP67006331 (cover-filt) and 2 WPW10120018 (slide rail (frz))s and 1 WPW10330991 (bracket) and 1 WPW10330993 (bracket), Replaced freezer door rails & brackets, freezer light switch, water filter cover, unkinked water line to fridge, ice maker cycling ok, freezer door seals ok; Job Completed.
Near Tracy, CA 95376
William
Job Details: 10/03/2018
WHIRLPOOL REFRIGERATOR WRX735SDBM03 Unit does not fit in home see pictures. Found waterline pinched/collapsed behind the fridge. Found freezer door not sealing properly. Freezer light sw frozen. Called WP TL Ref #7722989871, was not advised on freezer door issues, was told to instruct cx to use a nylon reinforced waterline. Adjusted water line at back of fridge, Ordered parts for freezer door alignment, water filter cover, light switch, 2 call count; ordrng 1 WP12466115SP (light switch) and 1 WP67006331 (cover-filt) and 2 WPW10120018 (slide rail (frz))s and 1 WPW10330991 (bracket) and 1 WPW10330993 (bracket), Replaced freezer door rails & brackets, freezer light switch, water filter cover, unkinked water line to fridge, ice maker cycling ok, freezer door seals ok; Job Completed.
Near Lathrop, CA 95330
William
Job Details: 10/03/2018
whirlpool refrigerator ARS266RBB Replaced start relay,checked temp, found a 10 degree drop, in temp, unit cooling at this time.
Near Lathrop, CA 95330
William
Job Details: 10/03/2018
whirlpool refrigerator ARS266RBB Replaced start relay,checked temp, found a 10 degree drop, in temp, unit cooling at this time.
Near Lathrop, CA 95330
William
Job Details: 10/03/2018
whirlpool refrigerator ARS266RBB Replaced start relay,checked temp, found a 10 degree drop, in temp, unit cooling at this time.
Near Tracy, CA 95376
William
Job Details: 10/03/2018
maytag refrigerator Replaced freezer door, ran ice maker harvest, fill & thermistor tests, unit operating as designed.; Job Completed.
Near Tracy, CA 95376
William
Job Details: 10/03/2018
maytag refrigerator Replaced freezer door, ran ice maker harvest, fill & thermistor tests, unit operating as designed.; Job Completed.
Near Colton, CA 92324
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Found stripped hub on basket. Ordering hub kit in stock.; ordrng 1 W10528947 (drive hub kit), Removed and replaced washplate. Tested unit. All tests good ; Job Completed.
Near Colton, CA 92324
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Found stripped hub on basket. Ordering hub kit in stock.; ordrng 1 W10528947 (drive hub kit), Removed and replaced washplate. Tested unit. All tests good ; Job Completed.
Near Colton, CA 92324
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Found stripped hub on basket. Ordering hub kit in stock.; ordrng 1 W10528947 (drive hub kit), Removed and replaced washplate. Tested unit. All tests good ; Job Completed.
Near Colton, CA 92324
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Found stripped hub on basket. Ordering hub kit in stock.; ordrng 1 W10528947 (drive hub kit), Removed and replaced washplate. Tested unit. All tests good ; Job Completed.
Near Colton, CA 92324
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Found stripped hub on basket. Ordering hub kit in stock.; ordrng 1 W10528947 (drive hub kit), Removed and replaced washplate. Tested unit. All tests good ; Job Completed.
Near Colton, CA 92324
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Found stripped hub on basket. Ordering hub kit in stock.; ordrng 1 W10528947 (drive hub kit), Removed and replaced washplate. Tested unit. All tests good ; Job Completed.
Near Redlands, CA 92374
Kevin
Job Details: 10/03/2018
roper dryer RGD4516FW0 Unit making loud noise during operation. Found broken rollers and worn belt. I removed and replaced rollers, belt and idler pulley with repair kit. Tested unit. All tests good. ; Job Complete.
Near Redlands, CA 92374
Kevin
Job Details: 10/03/2018
roper dryer RGD4516FW0 Unit making loud noise during operation. Found broken rollers and worn belt. I removed and replaced rollers, belt and idler pulley with repair kit. Tested unit. All tests good. ; Job Complete.
Near Redlands, CA 92374
Kevin
Job Details: 10/03/2018
roper washer RTW4516FW1 Customer stated unit not finishing cycle. I tipped unit back and found loose gearacse pulley which would cause false off balance load codes. I tightened pulley and recalibrated water levels in main control. Tested unit. All tests normal. ; Job Completed
Near Redlands, CA 92374
Kevin
Job Details: 10/03/2018
roper washer RTW4516FW1 Customer stated unit not finishing cycle. I tipped unit back and found loose gearacse pulley which would cause false off balance load codes. I tightened pulley and recalibrated water levels in main control. Tested unit. All tests normal. ; Job Completed
Near Redlands, CA 92374
Kevin
Job Details: 10/03/2018
roper washer RTW4516FW1 Customer stated unit not finishing cycle. I tipped unit back and found loose gearacse pulley which would cause false off balance load codes. I tightened pulley and recalibrated water levels in main control. Tested unit. All tests normal. ; Job Completed
Near Highland, CA 92346
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Customer concerned with water level and scratching noise during operation. I found fan blade on top of motor was rubbing against gearcase when running. I corrected fan blade and retested unit. All tests good. Informed customer of normal water levels based on different cycles. ; Job Completed
Near Highland, CA 92346
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Customer concerned with water level and scratching noise during operation. I found fan blade on top of motor was rubbing against gearcase when running. I corrected fan blade and retested unit. All tests good. Informed customer of normal water levels based on different cycles. ; Job Completed
Near Highland, CA 92346
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Customer concerned with water level and scratching noise during operation. I found fan blade on top of motor was rubbing against gearcase when running. I corrected fan blade and retested unit. All tests good. Informed customer of normal water levels based on different cycles. ; Job Completed
Near Highland, CA 92346
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Customer concerned with water level and scratching noise during operation. I found fan blade on top of motor was rubbing against gearcase when running. I corrected fan blade and retested unit. All tests good. Informed customer of normal water levels based on different cycles. ; Job Completed
Near Highland, CA 92346
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Customer concerned with water level and scratching noise during operation. I found fan blade on top of motor was rubbing against gearcase when running. I corrected fan blade and retested unit. All tests good. Informed customer of normal water levels based on different cycles. ; Job Completed
Near Highland, CA 92346
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Customer concerned with water level and scratching noise during operation. I found fan blade on top of motor was rubbing against gearcase when running. I corrected fan blade and retested unit. All tests good. Informed customer of normal water levels based on different cycles. ; Job Completed.
Near Highland, CA 92346
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Customer concerned with water level and scratching noise during operation. I found fan blade on top of motor was rubbing against gearcase when running. I corrected fan blade and retested unit. All tests good. Informed customer of normal water levels based on different cycles. ; Job Completed.
Near Perris, CA 92571
Kevin
Job Details: 10/03/2018
maytag washer MVWB765FW0 Customer stated unit would not finish cycle and giving poor wash performance. I found loose washplate causing poor wash performance. I tightened washplate. I recalibrated water levels and in main control. Tested unit. All tests good.
Near Perris, CA 92571
Kevin
Job Details: 10/03/2018
MAYTAG WASHER MVWB765FW0 Customer stated unit would not finish cycle and giving poor wash performance. I found loose washplate causing poor wash performance. I tightened washplate. I recalibrated water levels and in main control. Tested unit. All tests good. ; Job Complete.
Near Perris, CA 92571
Kevin
Job Details: 10/03/2018
MAYTAG WASHER MVWB765FW0 Customer stated unit would not finish cycle and giving poor wash performance. I found loose washplate causing poor wash performance. I tightened washplate. I recalibrated water levels and in main control. Tested unit. All tests good. ; Job Complete.
Near Perris, CA 92570
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Unit not spinning or agitating. I found that the belt shield had been pushed up into gearcase pulley causing it to bind up during operation and belt had fallen off. I removed shield that was bound up, reinstalled belt and adjusted legs to prevent. Instruct customer that the drain pan is not attached to drain in floor. All tests good. ; Job Completed.
Near Perris, CA 92570
Kevin
Job Details: 10/03/2018
whirlpool washer WTW5000DW1 Unit not spinning or agitating. I found that the belt shield had been pushed up into gearcase pulley causing it to bind up during operation and belt had fallen off. I removed shield that was bound up, reinstalled belt and adjusted legs to prevent. Instruct customer that the drain pan is not attached to drain in floor. All tests good. ; Job Completed.
Near Riverside, CA 92503
Kevin
Job Details: 10/03/2018
kitchenaid refrigerator KRFF707ESS01 Found stuck cubes in ice maker causing ice maker to slow ice production. Removed stuck cubes and cycled ice maker. All tests good. I also adjusted freezer door and rails to allow door to close properly. Tested unit all tests good. Temps normal. ; Job Completed.
Near Riverside, CA 92503
Kevin
Job Details: 10/03/2018
kitchenaid refrigerator KRFF707ESS01 Found stuck cubes in ice maker causing ice maker to slow ice production. Removed stuck cubes and cycled ice maker. All tests good. I also adjusted freezer door and rails to allow door to close properly. Tested unit all tests good. Temps normal. ; Job Completed.
Near Riverside, CA 92506
Kevin
Job Details: 10/03/2018
jennair oven JJW2430DP01 Had to remove wall oven to get access to cooktop installed above oven.
Near Riverside, CA 92506
Kevin
Job Details: 10/03/2018
jennair cooktop JGC7530BP Had to remove wall oven on job 212608 to service cooktop. Found left front burner not igniting evenly. I removed burner spreader and found loose orifice in holder. I tightened orifice and gas line to office holder. Tested unit. No more gas leak and burner looks good. All tests good.
Near Riverside, CA 92506
Kevin
Job Details: 10/03/2018
jennair cooktop JGC7530BP Had to remove wall oven on job 212608 to service cooktop. Found left front burner not igniting evenly. I removed burner spreader and found loose orifice in holder. I tightened orifice and gas line to office holder. Tested unit. No more gas leak and burner looks good. All tests good.
Near Rialto, CA 92376
Kevin
Job Details: 10/03/2018
whirlpool refrigerator WRF555SDFZ05 Display not lighting up. I removed user interface and found harness not plugged in all the way. I plugged connector in all the way and user interface lit up. Tested user interface and dispenser. All tests good.
Near Rialto, CA 92376
Kevin
Job Details: 10/03/2018
whirlpool refrigerator WRF555SDFZ05 Display not lighting up. I removed user interface and found harness not plugged in all the way. I plugged connector in all the way and user interface lit up. Tested user interface and dispenser. All tests good.
Near Fontana, CA 92335
Kevin
Job Details: 10/03/2018
WHIRLPOOL WASHER WTW8500DC0 nit giving error code for motor over current and over loaded. I removed rotor and found that the slider had cracked causing a restriction on the rotor. I removed and replaced slider. Tested unit. All tests good. ; used 1 W10734521 (SLIDER)
Near Fontana, CA 92335
Tyler
Job Details: 10/03/2018
WHIRLPOOL REFRIGERATOR WRS325FDAM04 frost in freezer on side near door. Found gap between liner and cabinet. Silicone gap and set temps all works good at this time; Job Complete.
Near Fontana, CA 92335
Tyler
Job Details: 10/03/2018
WHIRLPOOL REFRIGERATOR WRS325FDAM04 frost in freezer on side near door. Found gap between liner and cabinet. Silicone gap and set temps all works good at this time; Job Complete.
Near Fontana, CA 92335
Tyler
Job Details: 10/03/2018
maytag refrigerator MFF2558VEM9 referigerator is not getting as cold. Checked damper and temp settings. Found damper door was stuck. Fixed and tested all works good at this time.; Job Completed.
Near Fontana, CA 92335
Tyler
Job Details: 10/03/2018
maytag refrigerator MFF2558VEM9 referigerator is not getting as cold. Checked damper and temp settings. Found damper door was stuck. Fixed and tested all works good at this time.; Job Completed.
Near Fontana, CA 92335
Tyler
Job Details: 10/03/2018
maytag washer MVWX655DW0 the wash plate is not washing. Found stripped wash plate. Removed and replaced wash plate. Tested all works good at this time.; Job Completed.
Near Fontana, CA 92335
Tyler
Job Details: 10/03/2018
maytag washer MVWX655DW0 the wash plate is not washing. Found stripped wash plate. Removed and replaced wash plate. Tested all works good at this time.; Job Completed.
Near Rancho Cucamonga, CA 91730
Tyler
Job Details: 10/03/2018
whirlpool refrigerator WRF990SLAM02 unit is making noise. Found freezer wall is frozen causing fan blade to hit ice. Ordering fan motor kit in stock. Customer to defrost unit before return. Also user interface is not responding to cooling off. Ordering interface. 1 W10759670 (cntrl-elec), 1 WPW10514110 (motor evaporator), Customer complaint is unit is making noise. Found freezer wall is frozen causing fan blade to hit ice and user interface is not responding. Removed and replaced fan motor kit and control board kit. Tested all works good at this time.; Job Completed.
Near Rancho Cucamonga, CA 91730
Tyler
Job Details: 10/03/2018
WHIRLPOOL WASHER WTW4616FW2 water temp is not correct. Checked water temps and instructed customer that all water temps are temperature controlled. All works good at this time.; Job Completed.
Near Rancho Cucamonga, CA 91730
Tyler
Job Details: 10/03/2018
whirlpool washer WTW4616FW2 Customer states water temp is not correct. Checked water temps and instructed customer that all water temps are temperature controlled. All works good at this time.; Job Completed.
Near Rancho Cucamonga, CA 91730
Tyler
Job Details: 10/03/2018
whirlpool washer WTW4616FW2 Customer states water temp is not correct. Checked water temps and instructed customer that all water temps are temperature controlled. All works good at this time.; Job Completed.
Near Glendora, CA 91741
Tyler
Job Details: 10/03/2018
kitchenaid refrigerator KBSD608ESS01 Customer states water dispenser is not working. Unit is brand new and filter was not flushed. Flushed system and showed customer how to change filter. All works good at this time; Job Complete.
Near Glendora, CA 91741
Tyler
Job Details: 10/03/2018
kitchenaid refrigerator KBSD608ESS01 Customer states water dispenser is not working. Unit is brand new and filter was not flushed. Flushed system and showed customer how to change filter. All works good at this time; Job Complete.
Near Claremont, CA 91711
Tyler
Job Details: 10/03/2018
whirlpool washer MVWC400XW4 Customer states spin cycle is not working. Found error codes for speed sensor fault and basket speed not recognized. Found failed actuator. Ordering actuator in stock.; ordrng 1 WPW10006355 (actuator), Removed and replaced actuator calibrated and tested all works good at this time.
Near Claremont, CA 91711
Tyler
Job Details: 10/03/2018
whirlpool washer MVWC400XW4 Customer states spin cycle is not working. Found error codes for speed sensor fault and basket speed not recognized. Found failed actuator. Ordering actuator in stock.; ordrng 1 WPW10006355 (actuator), Removed and replaced actuator calibrated and tested all works good at this time.
Near San Bernardino, CA 92407
Tyler
Job Details: 10/03/2018
whirlpool freezer WRF535SMBM00 freezer door is really hard to pull out. Found rails are sticking. Ordering rails in stock.; ordrng 2 WPW10120018 (slide rail (frz))s Removed and replaced rails tested all works good at this time.; Job Completed.
Near San Bernardino, CA 92407
Tyler
Job Details: 10/03/2018
whirlpool freezer WRF535SMBM00 freezer door is really hard to pull out. Found rails are sticking. Ordering rails in stock.; ordrng 2 WPW10120018 (slide rail (frz))s Removed and replaced rails tested all works good at this time.; Job Completed.
Near Altadena, CA 91001
Bryan Dunn-Wilson
Job Details: 10/03/2018
amana washer NTW4516FW2 Customer states hearing clicking noise from unit. Ran diagnostics. Got no error codes. Ran test cycle asked customer if they heard the noise to point it out please. Customer says the click is the regular shifter noise. Explained to the cx that the click she is hearing is the shifter and no thing could be done to change it. Customer was just trying to make sure nothing was wrong with unit. ; Job Complete.
Near Altadena, CA 91001
Bryan Dunn-Wilson
Job Details: 10/03/2018
amana washer NTW4516FW2 Customer states hearing clicking noise from unit. Ran diagnostics. Got no error codes. Ran test cycle asked customer if they heard the noise to point it out please. Customer says the click is the regular shifter noise. Explained to the cx that the click she is hearing is the shifter and no thing could be done to change it. Customer was just trying to make sure nothing was wrong with unit. ; Job Complete.
Near Arcadia, CA 91006
Bryan Dunn-Wilson
Job Details: 10/03/2018
Jennair dishwasher JDB3600AWP2 Customer states dishwasher is leaking. Customer states it only happened one time. Removed bottom panel and ran unit. Unit did not leak. Inspected all water lines and drain hoses found no leaks. Informed customer if unit leaks again to give us a call. No dents dings or scratches caused by tech.
Near Arcadia, CA 91006
Bryan Dunn-Wilson
Job Details: 10/03/2018
Jennair dishwasher JDB3600AWP2 Customer states dishwasher is leaking. Customer states it only happened one time. Removed bottom panel and ran unit. Unit did not leak. Inspected all water lines and drain hoses found no leaks. Informed customer if unit leaks again to give us a call. No dents dings or scratches caused by tech.
Near Arcadia, CA 91006
Bryan Dunn-Wilson
Job Details: 10/03/2018
Jennair dishwasher JDB3600AWP2 Customer states dishwasher is leaking. Customer states it only happened one time. Removed bottom panel and ran unit. Unit did not leak. Inspected all water lines and drain hoses found no leaks. Informed customer if unit leaks again to give us a call. No dents dings or scratches caused by tech.
Near La Crescenta-Montrose, CA 91214
James
Job Details: 10/03/2018
kitchenaid refrigerator KRFF507ESS00 Frost build up on RC evap. Inspected 7nit. Called techline. Tech line wants service pointer done again considering there is no zip tie on evap and clips on evap cover are broken. Unit needs evap cover and evap motor with harness. Removed and replace harness and fan motor. Ensured proper placement of thermistor.
Near Los Angeles, CA 91352
Bryan Dunn-Wilson
Job Details: 10/03/2018
whirlpool refrigerator WRS321SDHB01 Customer states ice bin is broken. Ice bin has a large crack along the bottom. Ordering ice bin; ordering 1 WPW10558424 (ice-contnr), Removed and replaced ice bin. Cistomer approves repair at this time. No dents dings or scratches caused by tech.
Near Thousand Oaks, CA 91360
Aaron
Job Details: 10/02/2018
whirlpool refrigerator WRS571CIHZ01 Checked unit temperature settings unit is running 0°F in the freezer section and 36°F in the fresh food section which is perfectly running and good temperature ranges unit is working as designed; Job Complete.
Near Simi Valley, CA 93063
Aaron
Job Details: 10/02/2018
KITCHENAID REFRIGERATOR KRFF507EWH01 Customer is going to install the pressure regulator valve and have a plumber install it gave him the part unit intermittently has a chopping noise and sometimes it doesn’t Secondary regulator should help regulate pressures to help smooth out that choppy noise; Job Completed.
Near Simi Valley, CA 93063
Aaron
Job Details: 10/02/2018
whirlpool refrigerator WRS321SDHZ01 Checked operations unit is working just fine the noises concerned about weren't there, at this time cooling correct at this time ops normal; Job Completed.
Near Simi Valley, CA 93063
Aaron
Job Details: 10/02/2018
whirlpool refrigerator WRS321SDHZ01 Checked operations unit is working just fine the noises concerned about weren't there, at this time cooling correct at this time ops normal; Job Completed.
Near Simi Valley, CA 93065
Aaron
Job Details: 10/02/2018
whirlpool dryer WGD92HEFC0 Unit door inner cover is warped and can not hold the door seal in needs door inner complete to repair correct , ordered part; ordrng 1 W11188529 (door), Replaced the inner door asm tested ops normal now ; Job Completed.
Near Simi Valley, CA 93065
Aaron
Job Details: 10/02/2018
whirlpool range WFG770H0FZ0 Customer states that after using the oven the knobs for the cook top asm , reported to techline no deformity to the door gasket tested to see if anything obvious Kevin sr# 7723088982 said unit is working normal can get 150°F and is normal unit operating normal ; Job Complete.
Near Simi Valley, CA 93065
Aaron
Job Details: 10/02/2018
whirlpool range WFG770H0FZ0 Customer states that after using the oven the knobs for the cook top asm , reported to techline no deformity to the door gasket tested to see if anything obvious Kevin sr# 7723088982 said unit is working normal can get 150°F and is normal unit operating normal ; Job Complete.
Near Moorpark, CA 93021
Aaron
Job Details: 10/02/2018
maytag washer MVWB850WQ1 Unit Basket will not float anymore due to corrosion and also Is stripped due to overloading, bearings are bad est total to repair unit is more than replacing unit , customer declined to repair at this time. Job complete.
Near Moorpark, CA 93021
Aaron
Job Details: 10/02/2018
maytag washer MVWB850WQ1 Unit Basket will not float anymore due to corrosion and also Is stripped due to overloading, bearings are bad est total to repair unit is more than replacing unit , customer declined to repair at this time. Job complete.
Near Fillmore, CA 93015
Aaron
Job Details: 10/02/2018
frigidaire refrigerator FFHB2750TD0 Installed the water lines valve and gaskets , tested unit should start working within 24 hrs and allow 3 days to fill ice bin , ops nml now; Job Complete.
Near Santa Paula, CA 93060
Aaron
Job Details: 10/02/2018
amana dryer NGD4655EW2 Checked the unit bad thermal fuse , replaced the fuse and thermal tested unit found the air flow not there. takes to long to dry as well, instructed the customer without good venting the unit will not dry in a correct manner.