"F0E9 off balance Cx states unit is not running. Unit is under warranty. Checked unit and found grinding noise when it was spinning. Replaced cam and actuator. Calibrated unit and ran diagnostics, unit is working properly. ; used 1 W11481722 (Actuator), and 1 W10721967 (CAM) from stock"

"Cx states that drain pump runs after cycle is completed without stopping. Unit is not under warranty but was an SCode S153EB. Checked unit and found F3E1 error code. Replaced main control board, ran diagnostics and calibrated unit. Unit is now working properly."

"Cx states unit is leaving clothes wet at the end of cycle. Unit is under warranty. Checked unit and found that slider should be replaced. Tried to remove slider, slider was stuck and broke thee on my drill bits. Will need to replace Gearcase, slider, and rotor if cannot remove properly. ; ordrng 1 W11449841 (Gearcase) and 1 W10902814 (Washplate)"

Andrew #21249676 replace bake elementCx states that unit is not heating properly. Unit is under warranty. Checked unit and found that bake element is not working properly. Will need to replaced element and temp sensor. ; ordrng 1 W11348032 (Lower element)

"Cx states that unit is not dispensing water or making ice. Unit is under warranty. Checked unit and found water line is pinched/ twisted. Customer also said water would come out with low pressure but water filter house and water filter we recently replaced. Water pressure from house is coming out fine. Will need to replaced water filter, water line, and water filter housing. ; O-emld tckt"