Install the new drawers on the unit. Retest the unit and our unit doesnt have any more issues. Job complete.

"Upon arrival found unit with error code F7E2, this about the variable motor speed. Run the unit through test mode and the unit doesnt pass the test. This unit has a bad pump assembly motor. Replace the motor on the unit. Retest the unit and now unit is working properly. Job complete."

The doors were not closing properly and freezer was not working. Removed old unit. Installed new unit. New unit operating as designed.

"Upon arrival found unit with still water dripping for the ice compartment, according with customer has a bad unit, the unit has noise at night, check the unit and, noise is coming from compressor, inform the customer that is the normal level of sound. Call tech line and report this situation, after the test found the unit is tilted forward, inform this to the customer. The unit is already all the way raised on the adjuster, this means the floor has a level down. Informed the customer that as soon as they level the unit correctly. The unit should be a start working properly. This according with Techline. Job complete.SR: 7737019175"

"Install the new ice door on the unit and control board, check for the right seal on the door against the top ice panel, and now is good. Retest the unit and now unit is working properly. Job complete"